EN 2833-005:2013

Aerospace series - Glass fibre thermosetting preimpregnates - Technical specification - Part 005: Glass fabric/phenolic resin preimpregnate

This standard specifies the requirements for glass fabric/phenolic resin preimpregnates.
It shall be used together with EN 2833-1.

Luft- und Raumfahrt - Warmhärtbare Glasfaser-Prepregs - Technische Lieferbedingungen - Teil 005: Prepregs aus Glasfaser und Phenolharz

Die vorliegende Norm legt Anforderungen an Gewebe–Prepregs aus Glasfaser und Phenolharz fest.
Die Norm ist gemeinsam mit EN 2833-1 anzuwenden.

Série aérospatiale - Préimprégnés de verre textile/résine thermodurcissable - Spécification technique - Partie 005 : Verre textile/résine phénolique préimprégnés

Aeronavtika - Toplotno utrjeni predimpregnirani materiali (prepregi) s steklenimi vlakni - Tehnična specifikacija - 005. del: Prepregi iz steklenih vlaken in fenolne smole

General Information

• Status: Published
• Publication Date: 20-Aug-2013
• Withdrawal Date: 27-Feb-2014
• ICS: 49.025.40 - Rubber and plastics
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4 - Metallic
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 21-Aug-2013
• Completion Date: 21-Aug-2013
• Ref Project: SIST EN 2833-005:2014 - Aerospace series - Glass fibre thermosetting preimpregnates - Technical specification - Part 005: Glass fabric/phenolic resin preimpregnate

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.VPROHLuft- und Raumfahrt - Warmhärtbare Glasfaser - Prepregs - Technische Lieferbedingungen - Teil 005: Gewebe - Prepregs aus Glasfaser und PhenolharzSérie aérospatiale - Préimprégnés de verre textile/résine thermodurcissable
- Spécification technique - Partie 005 : Verre textile/résine phénolique préimprégnésAerospace series - Glass fibre thermosetting preimpregnates - Technical specification - Part 005: Glass fabric/phenolic resin preimpregnate49.025.99Drugi materialiOther materialsICS:Ta slovenski standard je istoveten z:EN 2833-005:2013SIST EN 2833-005:2014en01-marec-2014SIST EN 2833-005:2014SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2833-005
August 2013 ICS 49.025.40 English Version
Aerospace series - Glass fibre thermosetting preimpregnates - Technical specification - Part 005: Glass fabric/phenolic resin preimpregnate
Série aérospatiale - Préimprégnés de verre textile/résine thermodurcissable
- Spécification technique - Partie 005 : Verre textile/résine phénolique préimprégnés
Luft- und Raumfahrt - Warmhärtbare Glasfaser - Prepregs -Technische Lieferbedingungen - Teil 005: Gewebe - Prepregs aus Glasfaser und Phenolharz This European Standard was approved by CEN on 8 May 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2833-005:2013: ESIST EN 2833-005:2014

Aerospace series — Glass fibre reinforced plastics — Test method — Determination of apparent interlaminar shear strength EN 2379
Aerospace series — Fluids for assessment of non-metallic materials
EN 2489
Aerospace series — Fibre reinforced plastics — Determination of the action of test fluids
EN 2743
Aerospace series — Fibre reinforced plastics — Standard procedures for conditioning prior to testing unaged materials EN 2824
Aerospace series — Burning behaviour of non-metallic materials under the influence of radiating heat and flames — Determination of smoke density and gas components in the smoke of materials — Test equipment, apparatus and media
EN 2825
Aerospace series — Burning behaviour of non-metallic materials under the influence of radiating heat and flames — Determination of smoke density
EN 2826
Aerospace series — Burning behaviour of non-metallic materials under the influence of radiating heat and flames — Determination of gas components in the smoke EN 3783
Aerospace series — Fibre composite materials — Normalization of fibre dominated mechanical properties
EN 3844-1 Aerospace series —
...