Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Softened - Forging stock - a or D ≤ 300 mm

This standard specifies the requirements relating to:
Steel FE-PM1507 (X1CrNiMoAlTi12-11-2)
Vacuum induction melted and consumable electrode remelted
Softened
Forging stock
a or D ≤ 300 mm
for aerospace applications.

Luft- und Raumfahrt - Stahl FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vakuuminduktionserschmolzen und mit Selbstverzehrender Elektrode umgeschmolzen - Weichgeglüht - Schmiedevormaterial - a oder D ≤ 300 mm

Série aérospatiale - Acier FE-PM1507 (X1CrNiMoAlTi12-11-2) - Élaboré sous vide par induction et refondu à l'électrode consommable - Adouci - Produits destinés à la forge - a ou D ≤ 300 mm

La présente norme spécifie les exigences relatives à :
Acier FE-PM1507 (X1CrNiMoAlTi12-11-2)
Élaboré sous vide par induction et refondu à l’électrode consommable
Adouci
Produits destinés à la forge
a ou D ≤ 300 mm
pour applications aérospatiales.

Aeronavtika - Jeklo FE-PM1507 (X1CrNiMoAlTi12-11-2) - Taljeno z vakuumsko indukcijo in pretaljeno s talilno elektrodo - Mehčano - Material za kovanje a ali D ≤ 300 mm

Ta standard določa zahteve, ki se nanašajo na:
jeklo FE-PM1507 (X1CrNiMoAlTi12-11-2),
taljen z vakuumsko indukcijo in pretaljen s talilno elektrodo
ter mehčan
material za kovanje
a ali D < = 300 mm
za uporabo v aeronavtiki.

General Information

Status
Published
Publication Date
07-Dec-2010
Withdrawal Date
29-Jun-2011
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
08-Dec-2010
Completion Date
08-Dec-2010

Buy Standard

Standard
EN 4670:2011
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.DNXXPVNR49.025.10JeklaSteelsICS:Ta slovenski standard je istoveten z:EN 4670:2010SIST EN 4670:2011en,fr,de01-december-2011SIST EN 4670:2011SLOVENSKI
STANDARD



SIST EN 4670:2011



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4670
December 2010 ICS 49.025.10 English Version
Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Softened - Forging stock - a or D ≤ 300 mm
Série aérospatiale - Acier
FE-PM1507 (X1CrNiMoAlTi12-11-2) - Élaboré sous vide par induction et refondu à l'électrode consommable - Adouci - Produits destinés à la forge - a ou D ≤ 300 mm
Luft- und Raumfahrt - Stahl FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vakuuminduktionserschmolzen und mit Selbstverzehrender Elektrode umgeschmolzen - Weichgeglüht - Schmiedevormaterial
- a oder D ≤ 300 mmThis European Standard was approved by CEN on 2 July 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4670:2010: ESIST EN 4670:2011



EN 4670:2010 (E) 2 Contents Page Foreword . 3Introduction . 41 Scope . 52 Normative references . 5 SIST EN 4670:2011



EN 4670:2010 (E) 3 Foreword This document (EN 4670:2010) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2011, and conflicting national standards shall be withdrawn at the latest by June 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 4670:2011



EN 4670:2010 (E) 4 Introduction This European Standard is part of the series of EN metallic material standards for aerospace applications. The general organization of this series is described in EN 4258. This standard has been prepared in accordance with EN 4500-3. SIST EN 4670:2011



EN 4670:2010 (E) 5
1 Scope This European Standard specifies the requirements relating to: Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) Vacuum induction melted and consumable electrode remelted Softened Forging stock a or D ≤ 300 mm for aerospace applications. 2 Normative references The following referenced documents are indis
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.