Aerospace series - Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium - Part 004: ADA family, single and multicore assembly - Product standard

This document specifies the characteristics of UV laser printable electrical lightweight wires ADA family for use in the on-board 115 V (phase to neutral) or 200 V (phase-to-phase) AC, 28 VDC electrical systems of aircraft at operating temperatures between −65 °C and 180 °C. These cables are demonstrated to be arc resistant in sizes AWG 26 to 14 (115 VAC/200 VAC).
In addition, these cables can be suitable for use at 230 VAC/400 VAC in pressurized zones only when installed to take account of possible short circuit effects.
Other electrical system configurations are the responsibility of the users.
It is also possible to mark these cables by qualified compatible marking which satisfies the requirements of EN 3838:2022.

Luft- und Raumfahrt - Elektrische Leitungen, zur allgemeinen Verwendung, mit Leitern aus Aluminium oder kupferbeschichtetem Aluminium - Teil 004: ADA-Familie, ein-und mehradrige Leitungen - Produktnorm

No Scope available

Série aérospatiale - Câbles électriques, d’usage général, avec conducteurs en aluminium ou en aluminium chemisé cuivre - Partie 004 : Famille ADA, mono et multiconducteurs - Norme de produit

Le présent document spécifie les caractéristiques de la famille ADA de fils électriques allégés marquables par laser UV utilisés dans les systèmes électriques de bord des aéronefs 115 V (phase à neutre) ou 200 V (phase à phase), 28 VCC, à des températures de fonctionnement comprises entre −65 °C et 180 °C. Ces câbles ont démontré leur résistance aux arcs électriques dans les calibres AWG 26 à 14 (115 VCA/200 VCA).
En outre, ces câbles peuvent être adaptés à une utilisation à 230 VCA/400 VCA dans des zones pressurisées uniquement s'ils sont installés de manière à prendre en compte les effets d'un éventuel court-circuit.
Les autres configurations de systèmes électriques relèvent de la responsabilité des utilisateurs.
Il est également possible de marquer ces câbles par des marquages compatibles qualifiés qui satisfont aux exigences de l’EN 3838:2022.

Aeronavtika - Kabli, električni, za splošne namene, z vodniki iz aluminija ali pobakrenega aluminija - 004. del: Družina ADA, eno- in večžilni sklop - Standard za proizvod

General Information

Status
Not Published
Publication Date
17-Dec-2024
Current Stage
6055 - CEN Ratification completed (DOR) - Publishing
Start Date
02-Sep-2024
Completion Date
02-Sep-2024

Buy Standard

Draft
prEN 4681-004:2023
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
oSIST prEN 4681-004:2023
01-april-2023
Aeronavtika - Kabli, električni, za splošne namene, z vodniki iz aluminija ali
pobakrenega aluminija - 004. del: Družina ADA, eno- in večžilni sklop - Standard za
proizvod
Aerospace series - Cables, electric, general purpose, with conductors in aluminium or
copper-clad aluminium - Part 004: ADA family, Single and multicore assembly - Product
standard
Luft- und Raumfahrt - Elektrische Leitungen, zur allgemeinen Verwendung, mit Leitern
aus Aluminium oder kupferbeschichtetem Aluminium - Teil 004: ADA-Familie, ein-und
mehradrige Leitungen - Produktnorm
Série aérospatiale - Câbles électriques, d’usage général, avec conducteurs en
aluminium ou en aluminium chemisé cuivre - Partie 004 : Famille ADA, fil simple et
éléments assemblés - Norme de produit
Ta slovenski standard je istoveten z: prEN 4681-004
ICS:
29.060.20 Kabli Cables
49.025.20 Aluminij Aluminium
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
oSIST prEN 4681-004:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN 4681-004:2023
oSIST prEN 4681-004:2023
DRAFT
EUROPEAN STANDARD
prEN 4681-004
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2023
ICS
English Version
Aerospace series - Cables, electric, general purpose, with
conductors in aluminium or copper-clad aluminium - Part
004: ADA family, Single and multicore assembly - Product
standard
Série aérospatiale - Câbles électriques, d'usage général, Luft- und Raumfahrt - Elektrische Leitungen, zur
avec conducteurs en aluminium ou en aluminium allgemeinen Verwendung, mit Leitern aus Aluminium
chemisé cuivre - Partie 004 : Famille ADA, fil simple et oder kupferbeschichtetem Aluminium - Teil 004: ADA-
éléments assemblés - Norme de produit Familie, ein-und mehradrige Leitungen - Produktnorm
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4681-004:2023 E
worldwide for CEN national Members.

oSIST prEN 4681-004:2023
prEN 4681-004:2023 (E)
⁠⁠⁠Contents Page
⁠⁠European foreword . 3
1 ⁠⁠Scope . 4
2 ⁠⁠Normative references . 4
3 ⁠⁠Terms, definitions, symbols and abbreviations . 5
4 ⁠⁠Materials and construction . 5
4.1 ⁠⁠⁠Materials . 5
4.2 ⁠⁠⁠Construction . 5
4.3 ⁠⁠⁠Number of cores . 6
4.4 ⁠⁠⁠Colour coding of cores . 6
5 ⁠⁠Required characteristics . 6
6 ⁠⁠Quality assurance . 12
7 ⁠⁠Designation. 12
7.1 ⁠⁠⁠ Identification . 12
7.2 Type code (for short designation) . 12
8 ⁠⁠Identification and marking . 13
9 ⁠⁠Packaging, labelling and delivery lengths . 13
10 ⁠⁠⁠Technical specification . 13

oSIST prEN 4681-004:2023
prEN 4681-004:2023 (E)
⁠⁠European foreword
This document (prEN 4681-004:2023) has been prepared by the Aerospace and Defence Industries
Association of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This document is currently submitted to the CEN Enquiry.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
oSIST prEN 4681-004:2023
prEN 4681-004:2023 (E)
1 ⁠⁠Scope
This document specifies the characteristics of UV laser printable electrical lightweight wires AD family
for use in the on-board 115 V (phase to neutral) or 200 V (phase to phase) AC, 28 Vdc electrical systems
of aircraft at operating temperatures between −65 °C and 180 °C. These cables are demonstrated to be
arc resistant in sizes AWG 26 to 14 (115/200 V AC).
In addition, these cables may be suitable for use at 230/400 V AC in pressurised zones only when
installed to take account of possible short circuit effects.
Other electrical system configurations are the responsibility of the users.
It is also possible to mark these cables by qualified compatible marking which satisfies the requirements
of EN 3838.
2 ⁠⁠Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 2235:2022, Aerospace series - Single and multicore electrical cables, screened and jacketed - Technical
specification
EN 3475 (series), Aerospace series - Cables, electrical, aircraft use - Test methods - Part 100: General
EN 3719, Aerospace series - Aluminium or aluminium alloy conductors for electrical cables - Product
standard
EN 3838, Aerospace series - Requirements and tests on user-applied markings on aircraft electrical cables
EN 4651, Aerospace series - Copper-clad aluminium alloy conductors for electrical cables - Product standard
EN 4681-001, Aerospace series - Cables, electric, general purpose, with conductors in aluminium or copper-
clad aluminium - Part 001: Technical specification
EN 4681-002:2012, Aerospace series - Cables, electric, general purpose, with conductors in aluminium or
copper-clad aluminium - Part 002: General
EN 9133, Aerospace series - Quality Management Systems - Qualification Procedure for Aerospace Standard
Products
TR 6058, Aerospace series — Cable code identification list

Published as ASD-STAN Technical Report at the date of publication of this European Standard by AeroSpace
and Defence industries Association of Europe - Standardization (ASD-STAN) (www.asd-stan.org).
oSIST prEN 4681-004:202
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.