EN ISO 22288:2009

Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method (ISO 22288:2006)

ISO 22288:2006 specifies a method for determining the wet or dry flex resistance of leather and finishes applied to leather. It is applicable to all types of leather below 3,0 mm in thickness.

Leder - Physikalische und mechanische Prüfungen - Bestimmung der Dauerbiegefestigkeit nach dem Blattbiege-Verfahren (ISO 22288:2006)

Diese Internationale Norm legt ein Verfahren zur Bestimmung der Nass- oder Trockenbiegefestigkeit von Leder und von Lederzurichtungen fest. Das Verfahren ist für alle Lederarten mit Dicken unter 3,0 mm anwendbar.

Cuir - Essais physiques et mécaniques - Détermination de la résistance à la flexion à l'aide de la méthode de flexion d'empeigne (ISO 22288:2006)

L'ISO 22288:2006 spécifie une méthode pour déterminer la résistance à la flexion d'un cuir à l'état sec ou à l'état humide et des finitions appliquées au cuir. Elle s'applique à tous les types de cuirs dont l'épaisseur est inférieure à 3,0 mm.

Usnje - Fizikalno in mehansko preskušanje - Ugotavljanje odpornosti proti upogibanju z metodo upogibanja gornjega usnja (ISO 22288:2006)

General Information

• Status: Withdrawn
• Publication Date: 13-Jan-2009
• Withdrawal Date: 06-Oct-2015
• ICS: 59.140.30 - Leather and furs
• Technical Committee: CEN/TC 289 - Leather
• Drafting Committee: CEN/TC 289 - Leather
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 07-Oct-2015
• Ref Project: SIST EN ISO 22288:2009 - Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method (ISO 22288:2006)

Relations

• Replaces: EN 13335:2002 - Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method
• Effective Date: 21-Jan-2009
• Replaced By: EN ISO 5402-2:2015 - Leather - Determination of flex resistance - Part 2: Vamp flex method (ISO 5402-2:2015)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-maj-2009
1DGRPHãþD
SIST EN 13335:2002
Usnje - Fizikalno in mehansko preskušanje - Ugotavljanje odpornosti proti
upogibanju z metodo upogibanja gornjega usnja (ISO 22288:2006)
Leather - Physical and mechanical tests - Determination of flex resistance by the vamp
flex method (ISO 22288:2006)
Leder - Physikalische und mechanische Prüfungen - Bestimmung der
Dauerbiegefestigkeit nach dem Blattbiege-Verfahren (ISO 22288:2006)
Cuir - Essais physiques et mécaniques - Détermination de la résistance à la flexion à
l'aide de la méthode de flexion d'empeigne (ISO 22288:2006)
Ta slovenski standard je istoveten z: EN ISO 22288:2009
ICS:
59.140.30 Usnje in krzno Leather and furs
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 22288
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2009
ICS 59.140.30 Supersedes EN 13335:2002
English Version
Leather - Physical and mechanical tests - Determination of flex
resistance by the vamp flex method (ISO 22288:2006)
Cuir - Essais physiques et mécaniques - Détermination de Leder - Physikalische und mechanische Prüfungen -
la résistance à la flexion à l'aide de la méthode de flexion Bestimmung der Dauerbiegefestigkeit nach dem Blattbiege-
d'empeigne (ISO 22288:2006) Verfahren (ISO 22288:2006)
This European Standard was approved by CEN on 1 December 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 22288:2009: E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
The text of ISO 22288:2006 has been prepared by Technical Committee IULTCS International Union of
Leather Technologists and Chemists Societies of the International Organization for Standardization (ISO) and
has been taken over as EN ISO 22288:2009 by Technical Committee CEN/TC 289 “Leather” the secretariat of
which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by July 2009, and conflicting national standards shall be withdrawn at the
latest by July 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 13335:2002.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 22288:2006 has been approved by CEN as a EN ISO 22288:2009 without any modification.

INTERNATIONAL ISO
STANDARD 22288
IULTCS/IUP
First edition
2006-09-15
Leather — Physical and mechanical
tests — Determination of flex resistance
by the vamp flex method
Cuir — Essais physiques et mécaniques — Détermination de la
résistance à la flexion à l'aide de la méthode de flexion d'empeigne

Reference number
ISO 22288:2006(E)
IULTCS/IUP 39:2006(E)
©
ISO 2006
ISO 22288:2006(E)
IULTCS/IUP 39:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2006 – All rights reserved

ISO 22288:2006(E)
IULTCS/IUP 39:2006(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 22288 was prepared by the Physical Test Commission of the International Union of Leather
Technologists and Chemists Societies (IUP Commission, IULTCS) in collaboration with the European
Committee for Standardization (CEN) Technical Committee CEN/TC 289 Leather, the secretariat of which is
held by UNI. It was published as EN 13335. It is based on IUP 39 published in J. Soc. Leather Tech. Chem.,
84 (7), p. 381, 20
...