EN 16484:2023

Leather - Requirements for the determination of the origin of leather production

This document defines the requirements that are necessary to confer the origin of leather production based on the principle of the last substantial transformation according to Non-Preferential Rules of Origin.
This document is applicable to leather only and it is applicable also to leather with hair. Furs are excluded.
The country of origin of raw hides and skins isn’t relevant for the application of this document.

Leder - Anforderungen an die Bestimmung der Herkunft von Leder

Dieses Dokument legt die notwendigen Anforderungen fest, um die Herkunft der Lederherstellung, basierend auf dem Prinzip der letzten wesentlichen Be  oder Verarbeitung nach den nicht präferenziellen Ursprungsregeln festzulegen.
Dieses Dokument ist nur für Leder und auch für Leder mit Haarkleid anwendbar. Pelze sind ausgeschlossen.
Das Herkunftsland von Rohhäuten und  fellen ist für die Anwendung dieses Dokumentes nicht relevant.

Cuir - Exigences relatives à la détermination de l'origine de la production du cuir

Le présent document définit les exigences requises pour déterminer l'origine de la production du cuir, en appliquant le principe de dernière transformation substantielle conformément aux règles d'origine non préférentielle.
Le présent document est applicable uniquement au cuir, y compris au cuir pourvu de poils.  Il n'est pas applicable aux fourrures.
Le pays d'origine des peaux brutes n'est pas pertinent pour l'application du présent document

Usnje - Zahteve za ugotavljanje porekla proizvodnje usnja

Ta dokument določa zahteve, ki so potrebne za ugotavljanje porekla proizvodnje usnja na podlagi načela zadnje bistvene predelave v skladu z nepreferenčnimi pravili o poreklu.
Ta dokument se uporablja samo za usnje, vključno z usnjem z dlako. Krzno je izključeno.
Država porekla surovih kož za uporabo tega dokumenta ni pomembna.

General Information

• Status: Published
• Publication Date: 26-Sep-2023
• ICS: 59.140.30 - Leather and furs
• Technical Committee: CEN/TC 289 - Leather
• Drafting Committee: CEN/TC 289/WG 4 - Technical specifications on the use of leather and terminology
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 27-Sep-2023
• Due Date: 21-Dec-2023
• Completion Date: 27-Sep-2023
• Ref Project: SIST EN 16484:2023 - Leather - Requirements for the determination of the origin of leather production

Relations

• Replaces: EN 16484:2015 - Leather - Requirements for the determination of the origin of leather production
• Effective Date: 06-Oct-2021

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 16484:2023
01-december-2023
Usnje - Zahteve za ugotavljanje porekla proizvodnje usnja
Leather - Requirements for the determination of the origin of leather production
Leder - Anforderungen an die Bestimmung der Herkunft von Leder
Cuir - Exigences relatives à la détermination de l'origine de la production du cuir
Ta slovenski standard je istoveten z: EN 16484:2023
ICS:
59.140.30 Usnje in krzno Leather and furs
SIST EN 16484:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 16484:2023

---------------------- Page: 2 ----------------------
SIST EN 16484:2023


EN 16484
EUROPEAN STANDARD

NORME EUROPÉENNE

September 2023
EUROPÄISCHE NORM
ICS 59.140.30 Supersedes EN 16484:2015
English Version

Leather - Requirements for the determination of the origin
of leather production
Cuir - Exigences relatives à la détermination de Leder - Anforderungen an die Bestimmung der
l'origine de la production du cuir Herkunft von Leder
This European Standard was approved by CEN on 7 August 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 16484:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 16484:2023
EN 16484:2023 (E)
Contents Page

European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements for the determination of the origin of the leather production . 6
4.1 General. 6
4.2 Tanned leather (e.g. wet blue, wet white, vegetable tanned leather) . 6
4.3 Crust (dyed or not) . 7
4.4 Finished leathers. 7
5 Records to verify the country of origin . 7
Annex A (informative) Items to be provided to determine the origin of the leather
production . 8
A.1 General. 8
A.2 Product identification .
...