EN ISO 17249:2004
(Main)Safety footwear with resistance to chain saw cutting - (ISO 17249:2004)
Safety footwear with resistance to chain saw cutting - (ISO 17249:2004)
ISO 17249:2004 specifies requirements for safety footwear with resistance to chain saw cutting.
Sicherheitsschuhe mit Schutz gegen Kettensägenschnitte (ISO 17249:2004)
Chaussures de sécurité résistantes aux coupures de scie à chaîne (ISO 17249:2004)
L'ISO 17249:2004 spécifie les exigences des chaussures de sécurité résistantes aux coupures de scies à chaîne.
Zaščitna obutev, odporna proti urezu z verižno žago (ISO 17249:2004)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 17249:2005
01-marec-2005
=DãþLWQDREXWHYRGSRUQDSURWLXUH]X]YHULåQRåDJR ,62
Safety footwear with resistance to chain saw cutting - (ISO 17249:2004)
Sicherheitsschuhe mit Schutz gegen Kettensägenschnitte (ISO 17249:2004)
Chaussures de sécurité résistantes aux coupures de scie a chaîne (ISO 17249:2004)
Ta slovenski standard je istoveten z: EN ISO 17249:2004
ICS:
13.340.50 Varovanje nog in stopal Leg and foot protection
SIST EN ISO 17249:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN ISO 17249
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2004
ICS 13.340.50
English version
Safety footwear with resistance to chain saw cutting - (ISO
17249:2004)
Chaussures de sécurité résistantes aux coupures de scie à Sicherheitsschuhe mit Schutz gegen Kettensägenschnitte
chaîne (ISO 17249:2004) (ISO 17249:2004)
This European Standard was approved by CEN on 16 January 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17249:2004: E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
EN ISO 17249:2004 (E)
Contents page
Foreword.3
1 Scope.4
2 Normative references.4
3 Terms and definitions .4
4 Classification.4
5 Requirements.4
5.1 General.4
5.2 Design.7
5.3 Construction.8
5.4 Resistance to chain saw cutting .10
6 Marking.10
7 Information to be supplied.11
7.1 General.11
7.2 Protection against chain saw cutting .12
7.3 Electrical properties.12
7.3.1 Antistatic footwear.12
7.3.2 Electrically insulating footwear.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.