EN 13599:2002

Copper and copper alloys - Copper plate, sheet and strip for electrical purposes

This European Standard specifies the composition, property requirements including electrical properties, and
tolerances on dimensions and form for copper plate, sheet and strip for electrical purposes with thicknesses from
0,05 mm up to and including 25 mm and widths from 10 mm up to and including 1 250 mm.
The sampling procedures, the methods of test for verification of conformity to the requirements of this standard, and
the delivery conditions are also specified.

Kupfer und Kupferlegierungen - Platten, Bleche und Bänder aus Kupfer für die Anwendung in der Elektrotechnik

Diese Europäische Norm legt die Zusammensetzung, die Anforderungen an die Eigenschaften, einschließlich
elektrische Eigenschaften, Grenzabmaße und Formtoleranzen von Platten, Blechen und Bändern aus Kupfer mit
Dicken von 0,05 mm bis 25 mm und Breiten von 10 mm bis 1 250 mm für die Elektrotechnik fest.
Der Ablauf der Probenentnahme, die Prüfverfahren zur Feststellung der Übereinstimmung mit den Anforderungen
dieser Norm und die Lieferbedingungen sind ebenfalls festgelegt.

Cuivre et alliages de cuivre - Plaques, tôles et bandes en cuivre pour usages électriques

La présente norme européenne spécifie la composition, les caractéristiques, y compris les caractéristiques électriques et les tolérances de dimensions et de formes des plaques, tôles et bandes en cuivre pour usages électriques avec des épaisseurs comprises entre 0,05 mm et 25 mm inclus et des largeurs comprises entre 10 mm et 1 250 mm inclus.
Les procédures d'échantillonnage, les méthodes d'essai pour la vérification de la conformité aux exigences de la présente norme et les conditions de livraison sont également spécifiées.

Baker in bakrove zlitine – Bakrove plošče, pločevina in trakovi za uporabo v elektrotehniki

General Information

• Status: Withdrawn
• Publication Date: 19-Mar-2002
• Withdrawal Date: 07-Jan-2014
• ICS: 77.150.30 - Copper products
• Technical Committee: CEN/TC 133 - Copper and copper alloys
• Drafting Committee: CEN/TC 133/WG 2 - Rolled flat products
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 08-Jan-2014
• Completion Date: 08-Jan-2014
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: SIST EN 13599:2004 - Copper and copper alloys - Copper plate, sheet and strip for electrical purposes

Relations

• Replaced By: EN 13599:2014 - Copper and copper alloys - Copper plate, sheet and strip for electrical purposes
• Effective Date: 15-Jan-2014

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Copper and copper alloys - Copper plate, sheet and strip for electrical purposesHOHNWURWHKQLNLCuivre et alliages de cuivre - Plaques, tôles et bandes en cuivre pour usages électriquesKupfer und Kupferlegierungen - Platten, Bleche und Bänder aus Kupfer für die Anwendung in der ElektrotechnikTa slovenski standard je istoveten z:EN 13599:2002SIST EN 13599:2004en77.150.30ICS:SLOVENSKI
STANDARDSIST EN 13599:200401-januar-2004







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13599March 2002ICS 77.150.30English versionCopper and copper alloys - Copper plate, sheet and strip forelectrical purposesCuivre et alliages de cuivre - Plaques, tôles et bandes encuivre pour usages électriquesKupfer und Kupferlegierungen - Platten, Bleche und Bänderaus Kupfer für die Anwendung in der ElektrotechnikThis European Standard was approved by CEN on 22 February 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13599:2002 E



EN 13599:2002 (E)ContentspageForeword .3
1Scope .4
2Normative references .4
3Terms and definitions .4
4Designations .5
4.1Material .5
4.2Material condition .5
4.3Product .5
5Ordering information .6
6Requirements .7
6.1Composition .7
6.2Mechanical properties .8
6.3Bending characteristics .8
6.4Electrical properties .8
6.5Freedom from hydrogen embrittlement .8
6.6Dimensions and tolerances .8
6.7Edgewise curvature c .8
6.8Surface condition .9
7Sampling .9
7.1General .9
7.2Analysis .9
7.3Mechanical and electrical tests .9
8Test methods .9
8.1Analysis .9
8.2Tensile test .10
8.3Hardness test .10
8.4Bend test .10page
8.5Electrical resistivity test .11
8.6Hydrogen embrittlement test .11
8.7Retests .11
8.8Rounding of results .11
9Declaration of conformity andinspection documentation .11
9.1Declaration of conformity .11
9.2Inspection documentation .1210Marking, packaging, labelling .12Annex A
(informative)
Characteristics of coppers for electrical purposes .17Bibliography .19TablesTable 1 — Composition of copper .12Table 2 — Mechanical properties .13Table 3 — Electrical properties (at 20 °C) .14Table 4 — Tolerances on thickness of plate,sheet and strip .15Table 5 — Tolerances on width of strip .15Table 6 — Tolerances on width of plate and sheet .16Table 7 — Tolerances on length of plate, sheetand strip cut to length for lengthsup to 5 000 mm
.............16Table 8 — Squareness of cut plate and sheet 16Table 9 — Edgewise curvature c .........16Table A.1 — Particular characteristics of coppers for electrical purposes .....182



EN 13599:2002 (E)ForewordThis document EN 13599:2002 has been prepared by Technical Committee CEN/TC 133 "Copper and copperalloys", the Secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by September 2002, and conflicting national standards shall be withdrawn at the latestby September 2002.Within its programme of work, Technical Committee CEN/TC 133 requested CEN/TC 133/WG 5 "Copper forelectrical purposes" to prepare the following standard:EN 13599,
Copper and copper alloys — Copper plate, sheet and strip for electrical purposes.The products s
...