FprEN ISO 23675

Cosmetics - Sun protection test methods - In vitro determination of sun protection factor (SPF) (ISO/FDIS 23675:2024)

This International Standard specifies a method for the in vitro determination of Sun Protection Factor. This International standard is applicable to sunscreen products with an emulsion chassis, which are intended to be placed in contact with human skin.

Kosmetische Mittel - Untersuchungsverfahren für Sonnenschutzmittel - In vitro Bestimmung des Sonnenschutzfaktors (SSF) (ISO/FDIS 23675:2024)

Dieses Dokument legt ein Verfahren zur In-vitro-Bestimmung des Sonnenschutzfaktors (SSF) fest. Dieses Verfahren gilt für Sonnenschutzmittel in Form einer Emulsion oder einer alkoholischen Einphasenrezeptur, ausgenommen Sonnenschutzmittel in Form eines losen oder gepressten Puders oder Stiftes. Es werden Spezifikationen angegeben, die eine reproduzierbare Bestimmung der spektralen Extinktionseigenschaften des SSF-Schutzes ermöglichen.
Dieses Verfahren dient ausschließlich der Bestimmung eines statischen Sonnenschutzfaktors. Für die Bestimmung der Wasserbeständigkeit eines Sonnenschutzmittels ist es nicht anwendbar.

Cosmétiques - Méthodes d’essai de protection solaire - Détermination in vitro du facteur de protection solaire (FPS) (ISO/FDIS 23675:2024)

Kozmetika - Preskusne metode za zaščito pred soncem - Določanje faktorja zaščite pred soncem (SPF) in vitro (ISO/FDIS 23675:2024)

General Information

• Status: Not Published
• Publication Date: 20-Jan-2025
• ICS: 71.100.70 - Cosmetics. Toiletries
• Technical Committee: CEN/TC 392 - Cosmetics
• Drafting Committee: CEN/TC 392 - Cosmetics
• Current Stage: 5060 - Closure of Vote - Formal Approval
• Start Date: 21-Oct-2024
• Completion Date: 21-Oct-2024
• Ref Project: kSIST FprEN ISO 23675:2024 - Cosmetics - Sun protection test methods - In vitro determination of sun protection factor (SPF) (ISO/FDIS 23675:2024)

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 23675:2024
01-februar-2024
Kozmetika - Preskusne metode za zaščito pred soncem - Določanje faktorja
zaščite pred soncem (SPF) in vitro (ISO/DIS 23675:2023)
Cosmetics - Sun protection test Methods - In Vitro determination of Sun Protection
Factor (SPF) (ISO/DIS 23675:2023)
Kosmetische Mittel - Untersuchungsverfahren für Sonnenschutzmittel - In vitro
Bestimmung des Sonnenschutzfaktors (SSF) (ISO/DIS 23675:2023)
Cosmétiques - Méthodes d'essai de protection solaire - Détermination in vitro du facteur
de protection solaire (FPS) (ISO/DIS 23675:2023)
Ta slovenski standard je istoveten z: prEN ISO 23675
ICS:
71.100.70 Kozmetika. Toaletni Cosmetics. Toiletries
pripomočki
oSIST prEN ISO 23675:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN ISO 23675:2024
oSIST prEN ISO 23675:2024
DRAFT INTERNATIONAL STANDARD
ISO/DIS 23675
ISO/TC 217 Secretariat: INSO
Voting begins on: Voting terminates on:
2023-12-25 2024-03-18
Cosmetics — Sun protection test methods — In Vitro
determination of Sun Protection Factor (SPF)
ICS: 71.100.70
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 23675:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

oSIST prEN ISO 23675:2024
ISO/DIS 23675:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 23675
ISO/TC 217 Secretariat: INSO
Voting begins on: Voting terminates on:

Cosmetics — Sun protection test methods — In Vitro
determination of Sun Protection Factor (SPF)
ICS: 71.100.70
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: [phone]
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: [e-mail]
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 23675:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

oSIST prEN ISO 23675:2024
ISO/DIS 23675:2023(E)
Contents Page
Foreword .v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principles . 4
5 Reagents and/or materials . 4
5.1 Sample substrate/plate . 4
5.2 Reference sunscreen . 4
5.3 Finger-cot . 4
5.4 Blank . 4
6 Apparatus . 4
6.1 Spectrophotometers . 4
6.1.1 Specification . 4
6.1.2 Monitoring . 5
6.2 Automatic positive-displacement pipette . 5
6.3 Analytical Balance . 5
6.4 Robot . 5
6.5 Solar simulator . 5
6.5.1 Quality of solar simulator radiation . 6
6.5.2 Maintenance and monitoring the solar simulator . 6
7 Procedure .7
7.1 Outline of the test procedure (Annex G) . 7
7.2 Preparation of reagents and materials . 7
7.2.1 Plate preparation and handling . 7
7.2.2 Finger cot. 7
7.3 Product application on substrates and robot automatic spreading . 8
7.3.1 Weighing of product and deposit on plates . 8
7.3.2 Automatic spreading . 9
7.4 Measurement of initial absorbance using two plate types (290 nm to 400 nm) . 9
7.4.1 Blank measurement . 9
7.4.2 Initial absorbance measurement . 9
7.4.3 Calculation of Pre-irradiation In Vitro SPF . 10
i
7.5 Calculation of irradiation dose (based on Pre-irradiation In Vitro SPF ) . 10
i
7.6 Irradiation with calculated dose . 11
7.7 Measurement of Post-irradiation absorbance using two plate types . 11
7.8 Calculation of Post-irradiation In Vitro SPF . 11
i
7.9 Calculation of Final In Vitro SPF of each pair of plates .12
i
7.10 Calculation of Final In Vitro SPF of the product.12
7.10.1 Validation of In Vitro SPF .12
8 Test report .13
Annex A (normative) UV exposure and erythema action spectra and solar simulator UV
spectrum .14
Annex B (normative) Specification sample substrate .18
Annex C (normative) SPF reference sunscreen products .21
Annex D (normative) White Petroleum . .34
Annex E (normative) Spectrophotometers specification and monitoring .35
Annex F (normative) Robot specification.40
iii
oSIST prEN ISO 23675:2024
ISO/DIS 23675:2023(E)
Annex G (informative) Key steps of the methods .42
Bibliography .43
iv
oSIST prEN ISO 23675:2024
ISO/DIS 23675:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endors
...