Cosmetics - Analytical methods - Direct determination of traces of mercury in cosmetics by thermal decomposition and atomic absorption spectrometry (mercury analyser) (ISO 23674:2022)

This document specifies an analytical procedure for direct determination of traces of mercury in finished cosmetic products by thermal decomposition – atomic absorption spectrometry (mercury analyser).
This document aims to provide a procedure of quantification of mercury traces in cosmetic products that consumers can be exposed to in their usage. This method describes the determination of mercury traces in cosmetics by direct solid analysis with no need of prior digestion. Total mercury (both inorganic and organic species) can be quantified either in solid or liquid samples.

Kosmetische Mittel - Untersuchungsverfahren - Direkte Bestimmung von Quecksilberspuren in kosmetischen Mitteln mittels thermischer Zersetzung und Atomabsorptionsspektrometrie (Quecksilber-Analysator) (ISO 23674:2022)

Dieses Dokument legt ein Untersuchungsverfahren zur direkten Bestimmung von Quecksilberspuren in kosmetischen Endprodukten mittels thermischer Zersetzung   Atomabsorptionsspektrometrie (Quecksilber-Analysator) fest.
Dieses Dokument zielt darauf ab, ein Verfahren zur Quantifizierung von Quecksilberspuren in kosmetischen Mitteln bereitzustellen, denen Verbraucher bei ihrer Verwendung ausgesetzt sein können. Dieses Verfahren beschreibt die Bestimmung von Quecksilberspuren in kosmetischen Mitteln durch direkte Feststoffanalyse, ohne die Notwendigkeit eines vorherigen Aufschlusses. Das gesamte Quecksilber (sowohl anorganische als auch organische Spezies) kann entweder in festen oder flüssigen Proben quantifiziert werden.

Cosmétiques - Méthodes d’analyse - Dosage direct des traces de mercure dans les cosmétiques par décomposition thermique et spectrométrie d’absorption atomique (analyseur de mercure) (ISO 23674:2022)

Le présent document spécifie un mode opératoire d’analyse pour le dosage direct des traces de mercure dans les produits cosmétiques finis par décomposition thermique – spectrométrie d’absorption atomique (analyseur de mercure).
Le présent document a pour but de fournir un mode opératoire pour la quantification des traces de mercure dans les produits cosmétiques auxquelles les consommateurs sont susceptibles d’être exposés lors de leur utilisation. Cette méthode décrit le dosage des traces de mercure dans les cosmétiques par analyse solide directe sans nécessiter de digestion préalable. Le mercure total (à la fois les espèces inorganiques et organiques) peut être quantifié aussi bien dans des échantillons solides que liquides.

Kozmetika - Analizne metode - Neposredno določevanje živega srebra v sledovih v kozmetičnih izdelkih s termično razgradnjo in atomsko absorpcijsko spektrometrijo (analizator živega srebra) (ISO 23674:2022)

Ta mednarodni standard določa način določanja živega srebra v kozmetičnih izdelkih z integriranimi analiznimi sistemi za živo srebro. Cilj tega standarda je:
•   Opis analitičnega postopka
•   Validacija in karakterizacija metode s profilom točnosti

General Information

Status
Published
Publication Date
20-Sep-2022
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
21-Sep-2022
Completion Date
21-Sep-2022

Buy Standard

Standard
EN ISO 23674:2023
English language
24 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-april-2023
Kozmetika - Analizne metode - Neposredno določevanje živega srebra v sledovih v
kozmetičnih izdelkih s termično razgradnjo in atomsko absorpcijsko
spektrometrijo (analizator živega srebra) (ISO 23674:2022)
Cosmetics - Analytical methods - Direct determination of traces of mercury in cosmetics
by thermal decomposition and atomic absorption spectrometry (mercury analyser) (ISO
23674:2022)
Kosmetische Mittel - Untersuchungsverfahren - Direkte Bestimmung von
Quecksilberspuren in kosmetischen Mitteln mittels thermischer Zersetzung und
Atomabsorptionsspektrometrie (Quecksilber-Analysator) (ISO 23674:2022)
Cosmétiques - Méthodes d’analyse - Dosage direct des traces de mercure dans les
cosmétiques par décomposition thermique et spectrométrie d’absorption atomique
(analyseur de mercure) (ISO 23674:2022)
Ta slovenski standard je istoveten z: EN ISO 23674:2022
ICS:
71.100.70 Kozmetika. Toaletni Cosmetics. Toiletries
pripomočki
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 23674
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2022
EUROPÄISCHE NORM
ICS 71.100.70
English Version
Cosmetics - Analytical methods - Direct determination of
traces of mercury in cosmetics by thermal decomposition
and atomic absorption spectrometry (mercury analyser)
(ISO 23674:2022)
Cosmétiques - Méthodes d'analyse - Dosage direct des Kosmetische Mittel - Untersuchungsverfahren - Direkte
traces de mercure dans les cosmétiques par Bestimmung von Quecksilberspuren in kosmetischen
décomposition thermique et spectrométrie Mitteln mittels thermischer Zersetzung und
d'absorption atomique (analyseur de mercure) (ISO Atomabsorptionsspektrometrie (Quecksilber-
23674:2022) Analysator) (ISO 23674:2022)
This European Standard was approved by CEN on 15 August 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 23674:2022 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 23674:2022) has been prepared by Technical Committee ISO/TC 217
"Cosmetics" in collaboration with Technical Committee CEN/TC 392 “Cosmetics” the secretariat of
which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2023, and conflicting national standards shall
be withdrawn at the latest by March 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 23674:2022 has been approved by CEN as EN ISO 23674:2022 without any modification.

INTERNATIONAL ISO
STANDARD 23674
First edition
2022-08
Cosmetics — Analytical methods —
Direct determination of traces of
mercury in cosmetics by thermal
decomposition and atomic absorption
spectrometry (mercury analyser)
Cosmétiques — Méthodes d’analyse — Dosage direct des traces
de mercure dans les cosmétiques par décomposition thermique et
spectrométrie d’absorption atomique (analyseur de mercure)
Reference number
ISO 23674:2022(E)
ISO 23674:2022(E)
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 23674:2022(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Reagents . 2
6 Apparatus and equipment . 2
7 Calibration .3
7.1 General . 3
7.2 Liquid calibration standards. 3
7.3 Solid calibration standards . 4
8 Procedure .5
8.1 General . 5
8.2 Preparation of samples . 5
8.2.1 General recommendations . 5
8.2.2 General of samples . 5
9 Instrument parameters . 5
10 Quality control of the analysis . 5
10.1 General . 5
10.2 Quality control procedure . 5
10.2.1 Analysis blanks . 5
10.2.2 Quality control samples . 6
10.2.3 Replicates . 6
11 Calculation . 6
12 Method performance .6
13 Test report . 7
Annex A (informative) Performance of the method determined by the accuracy profile
methodology . 8
Annex B (informative) ISO 23674 and ISO 23821 common ring test results .13
Bibliography .16
iii
ISO 23674:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.