EN ISO 10650-2:2007

Dentistry - Powered polymerization activators - Part 2: Light-emitting diode (LED) lamps (ISO 10650-2:2007)

ISO 10650-2:2007 specifies requirements and test methods for powered polymerization activators with light-emitting diodes (LED) in the blue wavelength region intended for chair-side use in polymerization of dental polymer-based restorative materials.
ISO 10650-2:2007 is not applicable to powered polymerization activators used in laboratory fabrication of indirect restorations, veneers, dentures or other oral dental appliances.

Zahnheilkunde - Lichtpolymerisationsgeräte - Teil 2: Lumineszenzdiodenlampen (LED) (ISO 10650-2:2007)

Dieser Teil von ISO 10650 legt Anforderungen an und Prüfverfahren für Lichtpolymerisationsgeräte mit Luminenszenzdiodenlampen (LED) im blauen Wellenlängenbereich fest, die direkt am Patienten zur Polymerisation von licht härtenden Dentalwerkstoffen angewendet werden.
Dieser Teil von ISO 10650 gilt nicht für Lichtpolymerisationsgeräte, die im Dentallabor zur Herstellung von indirekten Restaurationen, Veneers, Prothesen oder anderen oralen Anwendungen verwendet werden.
Wo dies in den einzelnen Abschnitten dieser Internationalen Norm festgelegt ist, hat dieser Teil von ISO 10650 Vorrang vor IEC 60601-1:2005.

Art dentaire - Activateurs électriques de polymérisation - Partie 2: Lampes à diodes émettrices de lumière (LED) (ISO 10650-2:2007)

L'ISO 10650-2:2007 spécifie les exigences et les méthodes d'essai relatives aux activateurs électriques de polymérisation munis de lampes à diodes électroluminescentes (LED) dans le domaine de longueurs d'onde du bleu destinés à être utilisés à proximité du fauteuil dentaire pour polymériser les produits dentaires à base de polymères pour restauration.
L'ISO 10650-2:2007 ne s'applique pas aux activateurs électriques de polymérisation utilisés en laboratoire pour la fabrication des restaurations indirectes, incrustations, prothèses ou autres appareils buccaux.

Zobozdravstvo - Polimerizacijski aktivatorji - 2. del: Svetleče diode (LED) (ISO 10650-2:2007)

General Information

• Status: Withdrawn
• Publication Date: 31-Aug-2007
• Withdrawal Date: 29-Sep-2015
• ICS: 11.060.20 - Dental equipment
• Technical Committee: CEN/TC 55 - Dentistry
• Drafting Committee: CEN/TC 55 - Dentistry
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 30-Sep-2015
• Directive: 93/42/EEC - Council Directive 93/42/EEC of 14 June 1993 concerning medical devices
• Ref Project: SIST EN ISO 10650-2:2008 - Dentistry - Powered polymerization activators - Part 2: Light-emitting diode (LED) lamps (ISO 10650-2:2007)

Relations

• Replaced By: EN ISO 10650:2015 - Dentistry - Powered polymerization activators (ISO 10650:2015)
• Effective Date: 15-May-2013

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10650-2:2008
01-april-2008
=RER]GUDYVWYR3ROLPHUL]DFLMVNLDNWLYDWRUMLGHO6YHWOHþHGLRGH/(',62

Dentistry - Powered polymerization activators - Part 2: Light-emitting diode (LED) lamps
(ISO 10650-2:2007)
Zahnheilkunde - Lichtpolymerisationsgeräte - Teil 2: Lumineszenzdiodenlampen (LED)
(ISO 10650-2:2007)
Art dentaire - Activateurs électriques de polymérisation - Partie 2: Lampes a diodes
émettrices de lumiere (LED) (ISO 10650-2:2007)
Ta slovenski standard je istoveten z: EN ISO 10650-2:2007
ICS:
11.060.20
SIST EN ISO 10650-2:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN ISO 10650-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2007
ICS 11.060.20

English Version
Dentistry - Powered polymerization activators - Part 2: Light-
emitting diode (LED) lamps (ISO 10650-2:2007)
Art dentaire - Activateurs électriques de polymérisation - Zahnheilkunde - Lichtpolymerisationsgeräte - Teil 2:
Partie 2: Lampes à diodes émettrices de lumière (LED) Lumineszenzdiodenlampen (LED) (ISO 10650-2:2007)
(ISO 10650-2:2007)
This European Standard was approved by CEN on 27 August 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10650-2:2007: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN ISO 10650-2:2007 (E)
Contents Page
Foreword.3

2

---------------------- Page: 3 ----------------------

EN ISO 10650-2:2007 (E)
Foreword
This document (EN ISO 10650-2:2007) has been prepared by Technical Committee ISO/TC 106 "Dentistry" in
collaboration with Technical Committee CEN/TC 55 "Dentistry", the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by March 2008, and conflicting national standards shall be withdrawn at
the latest by March 2008.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 10650-2:2007 has been approved by CEN as a EN ISO 10650-2:2007 without any
modification.

3

---------------------- Page: 4 ----------------------

INTERNATIONAL ISO
STANDARD 10650-2
First edition
2007-09-01


Dentistry — Powered polymerization
activators —
Part 2:
Light-emitting diode (LED) lamps
Art dentaire — Activateurs électriques de polymérisation —
Partie 2: Lampes à diodes émettrices de lumière (LED)




Reference number
ISO 10650-2:2007(E)
©
ISO 2007

---------------------- Page: 5 ----------------------

ISO 10650-2:2007(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the softw
...