EN ISO 13078-3:2023
(Main)Dentistry - Dental furnace - Part 3: Test method for the evaluation of high temperature sintering furnace measurement with a separate thermocouple (ISO 13078-3:2023)
Dentistry - Dental furnace - Part 3: Test method for the evaluation of high temperature sintering furnace measurement with a separate thermocouple (ISO 13078-3:2023)
This document specifies a test method for the calibration of resistance-heated high temperature sintering furnaces that are suitable for the sintering of dental restorations in the temperature range up to 1 700 °C.
NOTE A test method for the calibration of dental furnaces that are suitable for the heat treatment of silica-based dental ceramic restorations in the temperature range between 600 °C and 1 050 °C is specified in ISO 13078:2013. ISO 13078:2013 does not include the calibration of sintering furnace used for sintering of oxide ceramics or sintered metal, in whose firing chamber restorations are sintered at temperatures of 1 000 °C to 1 700 °C.
Zahnheilkunde - Sinterofen - Teil 3: Prüfverfahren für die Bewertung der Hochtemperatur-Sinterofen-Messung mit separatem Thermoelement (ISO 13078‑3:2023)
Dieses Dokument legt ein Prüfverfahren zur Kalibrierung von widerstandsbeheizten Hochtemperatur-Sinteröfen fest, die zum Sintern von dentalen Restaurationen im Temperaturbereich bis 1 700 °C geeignet sind.
ANMERKUNG Ein Prüfverfahren zur Kalibrierung von Brennöfen, die zur Wärmebehandlung von silikathaltigen dentalkeramischen Restaurationen im Temperaturbereich zwischen 600 °C und 1 050 °C geeignet sind, ist in ISO 13078:2013 festgelegt. ISO 13078:2013 behandelt nicht die Kalibrierung von Sinteröfen zum Sintern von Oxidkeramik oder Sintermetall, in dessen Brennkammer Restaurationen im Temperaturbereich zwischen 1 000 °C und 1 700 °C gesintert werden.
Médecine bucco-dentaire - Fours dentaires - Partie 3: Méthode d’essai pour l’évaluation du mesurage des hautes températures de frittage au moyen d'un thermocouple externe (ISO 13078-3:2023)
Le présent document spécifie une méthode d’essai pour l’étalonnage des fours de frittage à haute température chauffés par résistance, adaptés au frittage des restaurations dentaires dans une plage de température allant jusqu’à 1 700 °C.
NOTE Une méthode d’essai relative à l’étalonnage des fours dentaires adaptés au traitement thermique des restaurations en céramique dentaire à base de silice dans la plage de température comprise entre 600 °C et 1 050 °C est spécifiée dans l’ISO 13078:2013. L’ISO 13078:2013 ne comprend pas l’étalonnage des fours de frittage utilisés pour le frittage des céramiques à base d’oxyde ou de métal fritté, dans les chambres de cuisson desquels les restaurations sont frittées à des températures comprises entre 1 000 °C et 1 700 °C.
Zobozdravstvo - Dentalne peči - 3. del: Preskusna metoda za vrednotenje meritev v visokotemperaturni peči za sintranje z ločenim termočlenom (ISO 13078-3:2023)
Ta dokument določa preskusno metodo za umerjanje uporovnih visokotemperaturnih peči za sintranje, ki so primerne za sintranje zobnih zalivk v temperaturnem območju do 1700 °C.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 13078-3:2023
01-september-2023
Zobozdravstvo - Dentalne peči - 3. del: Preskusna metoda za vrednotenje meritev
v visokotemperaturni peči za sintranje z ločenim termočlenom (ISO 13078-3:2023)
Dentistry - Dental furnace - Part 3: Test method for the evaluation of high temperature
sintering furnace measurement with a separate thermocouple (ISO 13078-3:2023)
Zahnheilkunde – Sinterofen – Teil 3: Prüfverfahren für die Bewertung der
Hochtemperatur-Sinterofen-Messung mit separatem Thermoelement (ISO 13078-
3:2023)
Médecine bucco-dentaire - Fours dentaires - Partie 3: Méthode d’essai pour l’évaluation
du mesurage des hautes températures de frittage au moyen d'un thermocouple externe
(ISO 13078-3:2023)
Ta slovenski standard je istoveten z: EN ISO 13078-3:2023
ICS:
11.060.20 Zobotehnična oprema Dental equipment
SIST EN ISO 13078-3:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 13078-3:2023
---------------------- Page: 2 ----------------------
SIST EN ISO 13078-3:2023
EN ISO 13078-3
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2023
EUROPÄISCHE NORM
ICS 11.060.01
English Version
Dentistry - Dental furnace - Part 3: Test method for the
evaluation of high temperature sintering furnace
measurement with a separate thermocouple (ISO 13078-
3:2023)
Médecine bucco-dentaire - Fours dentaires - Partie 3: Zahnheilkunde - Sinterofen - Teil 3: Prüfverfahren für
Méthode d'essai pour l'évaluation du mesurage des die Bewertung der Hochtemperatur-Sinterofen-
hautes températures de frittage au moyen d'un Messung mit separatem Thermoelement (ISO 13078-
thermocouple externe (ISO 13078-3:2023) 3:2023)
This European Standard was approved by CEN on 12 August 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13078-3:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 13078-3:2023
EN ISO 13078-3:2023 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 13078-3:2023
EN ISO 13078-3:2023 (E)
European foreword
This document (EN ISO 13078-3:2023) has been prepared by Technical Committee ISO/TC 106
"Dentistry" in collaboration with Technical Committee CEN/TC 55 “Dentistry” the secretariat of which
is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2023, and conflicting national standards
shall be withdrawn at the latest by November 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Se
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.