EN 3372-003:2007
(Main)Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures - 65 °C to 175 °C or 200 °C continuous - Part 003: Square flange receptacle - Product standard
Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures - 65 °C to 175 °C or 200 °C continuous - Part 003: Square flange receptacle - Product standard
This standard specifies the characteristics of square flange mounted receptacles in the family of circular electrical connectors coupled by bayonet ring.
It applies to class defined in Table 3.
For contacts, filler plugs and rear accessories associated with this receptacle, see EN 3372 002. For plugs and protective covers, see EN 3372 008 and EN 3372 006 respectively.
Luft- und Raumfahrt - Elektrische Rundsteckverbinder, kontaktgeschützt, Bajonettkupplung, Betriebstemperatur - 65 °C bis 175 °C oder 200 °C konstant - Teil 003: Fester Steckverbinder mit quadratischem Montageflansch – Produktnorm
Diese Norm legt die Eigenschaften von festen Steckverbindern mit quadratischem Montageflansch in der Fa¬milie von elektrischen Rundsteckverbindern fest, die mit einem Bajonettring gekuppelt werden.
Die Norm gilt für die in Tabelle 3 festgelegten Klassen.
Kontakte, Blindstecker und rückseitige Zubehörteile für diese festen Steckverbinder siehe EN 3372 002. Freie Steckverbinder und Schutzkappen siehe EN 3372 008 und EN 3372 006.
Série aérospatiale - Connecteurs électriques circulaires scoop-proof à accouplement par baïonnettes température d'utilisation - 65 °C to 175 °C ou 200 °C continu - Partie 003 : Embase à fixation par collerette carrée - Norme de produit
Aeronavtika - Konektorji, električni, okrogli, zaščiteni kontakt, z bajonetnim sklapljanjem, stalna delovna temperatura med -65 °C in 175 °C ali 200 °C - 003. del: Podlaga s kvadratno prirobnico - Standard za proizvod
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Elektrische Rundsteckverbinder, kontaktgeschützt, Bajonettkupplung, Betriebstemperatur - 65 °C bis 175 °C oder 200 °C konstant - Teil 003: Fester Steckverbinder mit quadratischem Montageflansch - ProduktnormSérie aérospatiale - Connecteurs électriques circulaires scoop-proof à accouplement par baïonnettes température d'utilisation - 65 °C to 175 °C ou 200 °C continu - Partie 003 : Embase à fixation par collerette carrée - Norme de produitAerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures - 65 °C to 175 °C or 200 °C continuous - Part 003: Square flange receptacle - Product standard49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3372-003:2007SIST EN 3372-003:2009en,de01-julij-2009SIST EN 3372-003:2009SLOVENSKI
STANDARD
SIST EN 3372-003:2009
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3372-003
July 2007 ICS 49.060 English Version
Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures - 65 °C to 175 °C or 200 °C continuous -Part 003: Square flange receptacle - Product standard
Série aérospatiale - Connecteurs électriques circulaires scoop-proof à accouplement par baïonnettes, température d'utilisation - 65 °C à 175 °C ou 200 °C continu - Partie 003 : Embase à fixation par collerette carrée - Norme de produit Luft- und Raumfahrt - Elektrische Rundsteckverbinder, kontaktgeschützt, Bajonettkupplung, Betriebstemperatur - 65 °C bis 175 °C oder 200 °C konstant - Teil 003: Fester Steckverbinder mit quadratischem Montageflansch - Produktnorm This European Standard was approved by CEN on 24 June 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3372-003:2007: ESIST EN 3372-003:2009
EN 3372-003:2007 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Required characteristics.5 5 Designation.7 6 Marking.8 7 Technical specification.8
SIST EN 3372-003:2009
EN 3372-003:2007 (E) 3 Foreword This document (EN 3372-003:2007) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has re-ceived the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by p
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.