EN 3372-008:2007

Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures - 65 °C to 175 °C or 200 °C continuous - Part 008: Free plug with grounding spring - Product standard

This standard specifies the characteristics of the free plug connector fitted with a grounding spring in the family of circular electrical connectors coupled by bayonet ring.
It applies to class defined in Table 3.
For contacts, filler plugs and rear accessories associated with this receptacle see EN 3372 002. For recep¬tacles and protective covers, see EN 3372 003, EN 3372 004, EN 3372 005, EN 3372 007, EN 3372 009 and EN 3372 010 respectively.

Luft- und Raumfahrt - Elektrische Rundsteckverbinder, kontaktgeschützt, Bajonettkupplung, Betriebstemperatur - 65 °C bis 175 °C oder 200 °C konstant - Teil 008: Freier Steckverbinder – Produktnorm

Diese Norm legt die Eigenschaften von freien Steckverbindern, die mit einer Erdungsfeder ausgerüstet sind, in der Familie von elektrischen Rundsteckverbindern fest, die mit einem Bajonettring gekuppelt werden.
Die Norm gilt für die in Tabelle 3 festgelegten Klassen.
Kontakte, Blindstecker und rückseitige Zubehörteile in Verbindung mit diesem freien Steckverbinder siehe EN 3372 002. Feste Steckverbinder und Schutzkappen siehe EN 3372 003, EN 3372 004, EN 3372 005, EN 3372 007, EN 3372 009 bzw. EN 3372 010.

Série aérospatiale - Connecteurs électriques circulaires scoop-proof à accouplement par baïonnettes température d'utilisation - 65 °C à 175 °C ou 200 °C continu - Partie 008 : Fiche - Norme de produit

Aeronavtika - Konektorji, električni, okrogli, zaščiteni kontakt, z bajonetnim sklapljanjem, stalna delovna temperatura med -65 °C in 175 °C ali 200 °C - 008. del: Vtič - Standard za proizvod

General Information

• Status: Published
• Publication Date: 10-Jul-2007
• Withdrawal Date: 30-Jan-2008
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 30-Jun-2017
• Ref Project: SIST EN 3372-008:2009 - Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures - 65 °C to 175 °C or 200 °C continuous - Part 008: Free plug with grounding spring - Product standard

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Elektrische Rundsteckverbinder, kontaktgeschützt, Bajonettkupplung, Betriebstemperatur - 65 °C bis 175 °C oder 200 °C konstant - Teil 008: Freier Steckverbinder – ProduktnormSérie aérospatiale - Connecteurs électriques circulaires scoop-proof à accouplement par baïonnettes température d'utilisation - 65 °C à 175 °C ou 200 °C continu - Partie 008: Fiche - Norme de produitAerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures - 65 °C to 175 °C or 200 °C continuous - Part 008: Free plug with grounding spring - Product standard49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3372-008:2007SIST EN 3372-008:2009en,de01-september-2009SIST EN 3372-008:2009SLOVENSKI
STANDARD



SIST EN 3372-008:2009



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3372-008
July 2007 ICS 49.060 English Version
Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures - 65 °C to 175 °C or 200 °C continuous -Part 008: Free plug with grounding spring - Product standard
Série aérospatiale - Connecteurs électriques circulaires scoop-proof à accouplement par baïonnettes, température d'utilisation - 65 °C à 175 °C ou 200 °C continu - Partie 008 : Fiche - Norme de produit
Luft- und Raumfahrt - Elektrische Rundsteckverbinder, kontaktgeschützt, Bajonettkupplung, Betriebstemperatur - 65 °C bis 175 °C oder 200 °C konstant - Teil 008: Freier Steckverbinder - Produktnorm This European Standard was approved by CEN on 24 June 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3372-008:2007: ESIST EN 3372-008:2009



EN 3372-008:2007 (E) 2
Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Required characteristics.5 5 Designation.6 6 Marking.7 7 Technical specification.7
SIST EN 3372-008:2009



EN 3372-008:2007 (E) 3 Foreword This document (EN 3372-008:2007) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has re-ceived the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2008, and conflicting national standards s
...