CEN/TS 13126-16:2004
(Main)Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 16: Fittings for lift and slide systems
Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 16: Fittings for lift and slide systems
This Part of EN xxxxx gives requirements and test methods for hardware for lift and slide systems for horizontally sliding windows and door height windows.
Baubeschläge, Beschläge für Fenster und Fenstertüren - Anforderungen und Prüfverfahren - Teil 16: Beschläge für Hebeschiebe-Systeme
Der vorliegende Teil der EN XXXXX legt die Anforderungen an und Prüfverfahren für Beschläge von Hebeschiebe-Systeme für Horizontal-Schiebefenster und -Fenstertüren fest.
Quincaillerie pour le bâtiment, ferrures de fenêtres et portes-fenêtres - Prescription et méthodes d'essais - Partie 16: Ferrures pour dispositifs levants-coulissants
La présente partie de norme européenne définit les prescriptions et méthodes d'essai pour les dispositifs levant-coulissants pour les fenêtres et portes-fenêtres coulissant horizontalement.
Stavbno okovje, pritrjevalni sistemi za okna in zastekljena vrata – Zahteve in preskusne metode – 16. del: Okovje za dvižne in drsne sisteme
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2005
Stavbno okovje, pritrjevalni sistemi za okna in zastekljena vrata – Zahteve in
preskusne metode – 16. del: Okovje za dvižne in drsne sisteme
Building hardware, fittings for windows and door height windows - Requirements and test
methods - Part 16: Fittings for lift and slide systems
Baubeschläge, Beschläge für Fenster und Fenstertüren - Anforderungen und
Prüfverfahren - Teil 16: Beschläge für Hebeschiebe-Systeme
Quincaillerie pour le bâtiment, ferrures de fenetres et portes-fenetres - Prescription et
méthodes d'essais - Partie 16: Ferrures pour dispositifs levants-coulissants
Ta slovenski standard je istoveten z: CEN/TS 13126-16:2004
ICS:
91.190
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
TECHNICAL SPECIFICATION
CEN/TS 13126-16
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
April 2004
ICS 91.190
English version
Building hardware, fittings for windows and door height windows
- Requirements and test methods - Part 16: Fittings for lift and
slide systems
Quincaillerie pour le bâtiment, ferrures de fenêtres et Baubeschläge, Beschläge für Fenster und Fenstertüren -
portes-fenêtres - Prescription et méthodes d'essais - Partie Anforderungen und Prüfverfahren - Teil 16: Beschläge für
16: Ferrures pour dispositifs levants-coulissants Hebeschiebe-Systeme
This Technical Specification (CEN/TS) was approved by CEN on 18 August 2003 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 13126-16:2004: E
worldwide for CEN national Members.
Contents
Page
Foreword .3
1 Scope.4
2 Normative references.4
3 Terms and definitions.4
4 Classification.4
5 Requirements .5
6 Test apparatus.6
7 Test methods.6
Annex A (informative) Apparatus.9
Annex B (normative) Flow chart of test procedure.12
Foreword
This document (CEN/TS 13126-16:2004) has been prepared by Technical Committee CEN/TC 33
“Doors, windows, shutters, building hardware and curtain walling”, the secretariat of which is held by
AFNOR.
A full contribution to the preparation of this Technical Specification has been made by the European
manufacturers organisation ‘ARGE’ and National Standards institutions.
This Technical Specification is one of a series of Technical Specifications dedicated to building
hardware products. It is divided into seventeen parts to incorporate all types of windows and door
height windows.
Informative annex A of CEN/TS 13126-1 gives detailed schedules of the elements of components of
the seventeen parts of this Technical Specification.
Normative annex B of CEN/TS 13126-1 gives schedules of the elements of components used on the
21 types of window opening functions.
Normative and informative annex to all parts of this Technical Specification are indicated in the
content of the seventeen parts.
The performance tests incorporated in this standard are considered to be reproducible and as such
will provide a consistent and objective assessment of the performance of these products throughout
CEN Member States.
Annex A is informative while annex B is normative.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to announce this Technical Specification: Austria, Belgium, Cyprus,
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
1 Scope
This Part of CEN/TS 13126 gives requirements and test methods for durability, strength, security and
function of fittings for lift and slide systems for windows and door height windows.
2 Normative references
This Technical Specification incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text, and the
publications are listed hereafter. For dated references, subsequent amendments to, or revisions of,
any of these publications apply to this standard only when incorporated in it by amendment or
revision. For undated references, the latest edition of the publication referred to applies (including
amendments).
EN 1670, Building hardware – Corrosion resistance – Requirements and test methods.
EN 12519:2004, Windows and doors - Terminology
CEN/TS 13126-1:2004, Building hardware – Fittings for windows and door height windows –
Requirements and test methods – Part 1: Requirements common to all types of fittings.
CEN/TS 13126-15, Building hardware – Fittings for windows and door height windows –
Requirements and test-methods – Rollers
3 Terms and definitions
For the purposes of this Technical Specification, the terms and definitions given in EN 12519:2004 for
windows and doors apply.
4 Classification
4.1 Ge
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.