iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

CEN ISO/TR 52022-2:2017

(Main)

Energy performance of buildings - Thermal, solar and daylight properties of building components and elements - Part 2: Explanation and justification (ISO/TR 52022-2:2017)

Energy performance of buildings - Thermal, solar and daylight properties of building components and elements - Part 2: Explanation and justification (ISO/TR 52022-2:2017)

ISO/TR 52022-2:2017 contains information to support the correct understanding and use of ISO 10077‑1, ISO 10077‑2, ISO 12631, ISO 52022‑1 and ISO 52022‑3.
This technical report does not contain any normative provision.

Energieeffizienz von Gebäuden - Wärmetechnische, solare und tageslichtbezogene Eigenschaften von Bauteilen und Bauelementen - Teil 2: Erklärung und Begründung (ISO/TR 52022-2:2017)

Dieser Technische Bericht bezieht sich auf die Normen ISO 10077 1, ISO 10077 2, ISO 12631, ISO 52022 1 und ISO 52022 3.
Er enthält Informationen für das korrekte Verständnis und die ordnungsgemäße Anwendung dieser Normen.
Dieser Technische Bericht enthält keine normativen Vorschriften.

Performance énergétique des bâtiments - Propriétés thermiques, solaires et lumineuses des composants et éléments du bâtiment - Partie 2: Explication et justification (ISO/TR 52022-2:2017)

L'ISO/TR 52022-2:2017 contient des informations permettant d'assurer la compréhension et l'utilisation correctes des normes ISO 10077‑1, ISO 10077‑2, ISO 12631, ISO 52022‑1 et ISO 52022‑3.
Le présent Rapport technique ne contient aucune disposition normative.

Energetska učinkovitost stavb - Lastnosti gradbenih komponent in elementov glede toplote, sončnega obsevanja in dnevne svetlobe - 2. del: Obrazložitev in utemeljitev (ISO/TR 52022-2:2017)

To novo tehnično poročilo se sklicuje na skupino standardov EN ISO 10077-1, EN ISO 10077-2, EN ISO 12631, EN ISO 52022-X (na podlagi revizije standardov EN 13363-1 in EN ISO 52022-X (na podlagi revizije standarda EN 13363-2)) za toplotno učinkovitost oken, vrat in polken – Lastnosti oken, okvirjev in fasad glede toplote, sončnega obsevanja ter dnevne svetlobe – Računske metode. Vsebuje informacije za podporo pravilnega razumevanja, uporabe in nacionalne prilagoditve teh standardov. To tehnično poročilo ne vsebuje nobenih normativnih določb.

General Information

Status
Published
Publication Date
18-Jul-2017
ICS
91.120.10 - Thermal insulation of buildings
Technical Committee
CEN/TC 89 - Thermal performance of buildings and building components
Drafting Committee
CEN/TC 89/WG 7 - Thermal properties of doors and windows
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
19-Jul-2017
Due Date
11-Mar-2016
Completion Date
19-Jul-2017
Directive
2010/31/EU - Directive 2010/31/eu of the European Parliament and of the Council of 19 May 2010 on the energy performance of buildings (recast)
Mandate
M/480 - Mandate to CEN, CENELEC and ETSI for the elaboration and adoption of standards for a methodology calculating the integrated energy performance of buildings and promoting the energy efficiency of buildings, in accordance with the terms set in the recast of the Directive on the energy performance buildings (2010/31/EU)
Ref Project
SIST-TP CEN ISO/TR 52022-2:2017 - Energy performance of buildings - Thermal, solar and daylight properties of building components and elements - Part 2: Explanation and justification (ISO/TR 52022-2:2017)

Buy Standard

TP CEN ISO/TR 52022-2:2017TP CEN ISO/TR 52022-2:2017
PreviousNext
Technical report
TP CEN ISO/TR 52022-2:2017
English language
57 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TP CEN ISO/TR 52022-2:2017
01-september-2017
(QHUJHWVNDXþLQNRYLWRVWVWDYE/DVWQRVWLJUDGEHQLKNRPSRQHQWLQHOHPHQWRY
JOHGHWRSORWHVRQþQHJDREVHYDQMDLQGQHYQHVYHWOREHGHO2EUD]ORåLWHYLQ
XWHPHOMLWHY ,6275
Energy performance of buildings - Thermal, solar and daylight properties of building
components and elements - Part 2: Explanation and justification (ISO/TR 52022-2:2017)
Energieeffizienz von Gebäuden - Wärmetechnische, solare und tageslichtbezogene
Eigenschaften von Bauteilen und Bauelementen - Teil 2: Erklärung und Begründung
(ISO/TR 52022-2:2017)
Performance énergétique des bâtiments - Propriétés thermiques, solaires et lumineuses
des composants et éléments du bâtiment - Partie 2: Explication et justification (ISO/TR
52022-2:2017)
Ta slovenski standard je istoveten z: CEN ISO/TR 52022-2:2017
ICS:
27.015 (QHUJLMVNDXþLQNRYLWRVW Energy efficiency. Energy
2KUDQMDQMHHQHUJLMHQD conservation in general
VSORãQR
91.120.10 Toplotna izolacija stavb Thermal insulation of
buildings
SIST-TP CEN ISO/TR 52022-2:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TP CEN ISO/TR 52022-2:2017

---------------------- Page: 2 ----------------------

SIST-TP CEN ISO/TR 52022-2:2017


CEN ISO/TR 52022-2
TECHNICAL REPORT

RAPPORT TECHNIQUE

July 2017
TECHNISCHER BERICHT
ICS 91.120.10
English Version

Energy performance of buildings - Thermal, solar and
daylight properties of building components and elements -
Part 2: Explanation and justification (ISO/TR 52022-
2:2017)
Performance énergétique des bâtiments - Propriétés Energieeffizienz von Gebäuden - Wärmetechnische,
thermiques, solaires et lumineuses des composants et solare und tageslichtbezogene Eigenschaften von
éléments du bâtiment - Partie 2: Explication et Bauteilen und Bauelementen - Teil 2: Erklärung und
justification (ISO/TR 52022-2:2017) Begründung (ISO/TR 52022-2:2017)


This Technical Report was approved by CEN on 24 February 2017. It has been drawn up by the Technical Committee CEN/TC 89.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TR 52022-2:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TP CEN ISO/TR 52022-2:2017
CEN ISO/TR 52022-2:2017 (E)
Contents Page
European foreword . 3
2

---------------------- Page: 4 ----------------------

SIST-TP CEN ISO/TR 52022-2:2017
CEN ISO/TR 52022-2:2017 (E)
European foreword
This document (CEN ISO/TR 52022-2:2017) has been prepared by Technical Committee ISO/TC 163
"Thermal performance and energy use in the built environment" in collaboration with Technical
Committee CEN/TC 89 “Thermal performance of buildings and building components” the secretariat of
which is held by SIS.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
This document is part of the set of standards on the energy performance of buildings (the set of EPB
standards) and has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association (Mandate M/480, see reference [EF1] below), and supports essential
requirements of EU Directive 2010/31/EC on the energy performance of buildings (EPBD, [EF2]).
In case this standard is used in the context of national or regional legal requirements, mandatory
choices may be given at national or regional level for such specific applications, in particular for the
application within the context of EU Directives transposed into national legal requirements.
Further target groups are users of the voluntary common European Union certification scheme for the
energy performance of non-residential buildings (EPBD art.11.9) and any other regional (e.g. Pan
European) parties wanting to motivate their assumptions by classifying the b
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 52016-3:2023(Main)
Energy performance of buildings - Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads - Part 3: Calculation procedures regarding adaptive building envelope elements (ISO 52016-3:2023)
SIST EN ISO 52016-3:2024

This document specifies procedures for the calculation of the energy needs for heating and cooling, internal temperatures and sensible and latent heat loads of a building according to the hourly calculation methodology in ISO 52016-1. Additions or modifications of the calculations are provided in this document if the building envelope contains one or more adaptive building envelope elements (building envelope elements with adaptive components that are either environmentally or actively controlled as a function of specific conditions). The adaptive building envelope element replaces the transparent building element in the calculation according to ISO 52016-1.
The three types of adaptive building envelope elements covered in this document are:
—     building envelope elements with dynamic solar shading;
—     building envelope elements with chromogenic glazing;
—     building envelope elements with an actively ventilated cavity.
Environmentally activated control is described for building envelope elements with chromogenic glazing, but can also occur for other types of adaptive building envelope elements. In that case the same approach applies as for environmentally activated chromogenic glazing.
This document is applicable to the assessment of the energy performance of buildings (EPB) (energy performance labels and certificates), including comparison between buildings and checking conformity with minimum energy performance criteria.
It is also applicable to assess the contribution of the adaptive building envelope element to the smart readiness of a building.
In addition, this document provides indicators for the impact of the adaptive building envelope element on the performance of the building compared to a reference building envelope element. It is applicable to buildings at the design stage, to new buildings after construction and to existing buildings in the use phase.
This document is not applicable to geometrically complex adaptive building envelope elements that can only be modelled as multiple coupled thermal zones.
NOTE            The background to the selection of adaptive building envelope elements is given in ISO/TR 52016-4.

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 6781-1:2023(Main)
Performance of buildings - Detection of heat, air and moisture irregularities in buildings by infrared methods - Part 1: General procedures (ISO 6781-1:2023)
SIST EN ISO 6781-1:2023

This document specifies requirements and methodologies for infrared thermographic services for detection of heat, air and moisture irregularities in buildings that help users to specify and understand
a)       the extent of thermographic services required,
b)       the type and condition of equipment available for use,
c)        the qualifications of equipment operators, image analysts, and report authors and those making recommendations, and
d)       the reporting of results.
It provides guidance to understanding and utilizing the final results stemming from provision of the thermographic services.
This document is applicable to the general procedures for infrared thermographic methods as can be applied to residential, commercial, and institutional and special use buildings.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 22097:2023(Main)
Thermal insulation for buildings - Reflective insulation products - Determination of thermal performance (ISO 22097:2023)
SIST EN ISO 22097:2023

This document describes a set of procedures for using existing standardized CEN or ISO test and calculation methods to determine the thermal performance of reflective insulation products. This document supports and does not replace existing CEN or ISO test methods.
This document applies to any thermal insulation product that derives a proportion of its claimed thermal properties from the presence of one or more reflective or low emissivity surfaces together with any associated airspace(s). It does not replace the existing procedures for the determination of the thermal performance of products already covered by an existing harmonized product standard where the declared value of these products does not specifically include any claims attributable to the emissivity of the facing. It does not, and cannot, give an in-use or design value of thermal performance, but provides standardized information from which these can be determined.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12241:2022(Main)
Thermal insulation for building equipment and industrial installations - Calculation rules (ISO 12241:2022, Corrected version 2022-11)
SIST EN ISO 12241:2022

This document gives rules for the calculation of heat-transfer-related properties of building equipment and industrial installations, predominantly under steady-state conditions. This document also gives a simplified approach for the calculation of thermal bridges.

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12569:2017(Main)
Thermal performance of buildings and materials - Determination of specific airflow rate in buildings - Tracer gas dilution method (ISO 12569:2017)
SIST EN ISO 12569:2018

ISO 12569:2017 establishes methods to obtain the ventilation rate or specific airflow rate in a building space (which is considered to be a single zone) using a tracer gas.
The measurement methods apply for spaces where the combined conditions concerning the uniformity of tracer gas concentration, measurement of the exhaust gas concentration, effective mixed zone and/or fluctuation of ventilation are satisfied.
ISO 12569:2017 provides three measurement methods using a tracer gas: concentration decay method, continuous dose method, and constant concentration method.
NOTE          Specific measurement conditions are given in Table 1.

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 52018-1:2017(Main)
Energy performance of buildings - Indicators for partial EPB requirements related to thermal energy balance and fabric features - Part 1: Overview of options (ISO 52018-1:2017)
SIST EN ISO 52018-1:2017

The set of EPB assessment standards produces a great number of overall and partial EPB indicators as outputs, which can be used for different purposes. ISO 52018-1:2017 deals with the use as requirement of partial EPB indicators related to the fabric and related to the thermal balance of the building. Thermal balance aspects concern both the heating and cooling needs and the free floating temperatures, especially with respect to overheating or too cold indoor temperatures. ISO 52018-1:2017 can support both private parties and public regulators (and all stakeholders involved in the regulatory process) with the "post-processing" of these outputs.
ISO 52018-1:2017 provides standardized tables for reporting, in a structured and transparent manner, the choices that are to be made with respect to the partial EPB requirements covered by ISO 52018-1:2017. The tables are non-restrictive, thus allowing for full regulatory flexibility.
NOTE   Table 1 in the Introduction shows the relative position of ISO 52018-1:2017 within the set of EPB standards in the context of the modular structure as set out in ISO 52000-1.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard – translation
    52 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12631:2017(Main)
Thermal performance of curtain walling - Calculation of thermal transmittance (ISO 12631:2017)
SIST EN ISO 12631:2017

ISO 12631:2017 specifies a method for calculating the thermal transmittance of curtain walls consisting of glazed and/or opaque panels fitted in, or connected to, frames.
The calculation includes:
-      different types of glazing, e.g. glass or plastic; single or multiple glazing; with or without low emissivity coating; with cavities filled with air or other gases;
-      frames (of any material) with or without thermal breaks;
-      different types of opaque panels clad with metal, glass, ceramics or any other material.
Thermal bridge effects at the rebate or connection between the glazed area, the frame area and the panel area are included in the calculation.
The calculation does not include:
-      effects of solar radiation;
-      heat transfer caused by air leakage;
-      calculation of condensation;
-      effect of shutters;
-      additional heat transfer at the corners and edges of the curtain walling;
-      connections to the main building structure nor through fixing lugs;
-      curtain wall systems with integrated heating.
NOTE       Table 1 in the Introduction shows the relative position of ISO 12631:2017 within the set of EPB standards in the context of the modular structure as set out in ISO 52000-1.

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN ISO/TR 52003-2:2017(Main)
Energy performance of buildings - Indicators, requirements, ratings and certificates - Part 2: Explanation and justification of ISO 52003-1 (ISO/TR 52003-2:2017)
SIST-TP CEN ISO/TR 52003-2:2017

ISO/TR 52003-2:2017 refers to ISO 52003‑1. It contains information to support the correct understanding and use of ISO 52003‑1 and does not contain any normative provisions.
NOTE       The relation with other EPB standards, product standards and product policy is shown schematically in Figure 4 of Clause 6.

  • Technical report
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13789:2017(Main)
Thermal performance of buildings - Transmission and ventilation heat transfer coefficients - Calculation method (ISO 13789:2017)
SIST EN ISO 13789:2017

ISO 13789:2017 specifies a method and provides conventions for the calculation of the steady‐state transmission and ventilation heat transfer coefficients of whole buildings and parts of buildings. It is applicable both to heat loss (internal temperature higher than external temperature) and to heat gain (internal temperature lower than external temperature). For the purpose of ISO 13789:2017, the heated or cooled space is assumed to be at uniform temperature.
Annex C provides a steady‐state method to calculate the temperature in unconditioned spaces adjacent to conditioned spaces.
NOTE   Table 1 in the Introduction shows the relative position of ISO 13789:2017 within the set of EPB standards in the context of the modular structure as set out in ISO 52000-1.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 6946:2017(Main)
Building components and building elements - Thermal resistance and thermal transmittance - Calculation methods (ISO 6946:2017, Corrected version 2021-12)
SIST EN ISO 6946:2017

ISO 6946:2017 provides the method of calculation of the thermal resistance and thermal transmittance of building components and building elements, excluding doors, windows and other glazed units, curtain walling, components which involve heat transfer to the ground, and components through which air is designed to permeate.
The calculation method is based on the appropriate design thermal conductivities or design thermal resistances of the materials and products for the application concerned.
The method applies to components and elements consisting of thermally homogeneous layers (which can include air layers).
ISO 6946:2017 also provides an approximate method that can be used for elements containing inhomogeneous layers, including the effect of metal fasteners, by means of a correction term given in Annex F. Other cases where insulation is bridged by metal are outside the scope of ISO 6946:2017.
NOTE   Table 1 in the Introduction shows the relative position of ISO 6946:2017 within the set of EPB standards in the context of the modular structure as set out in ISO 52000‑1.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard – translation
    49 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
  • Standard – translation
    50 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day