prEN 3155-001

Aerospace series - Electrical contacts used in elements of connection - Part 001: Technical Specification

This document specifies:
-   the electrical, mechanical, environmental and dimensional characteristics of electrical contacts used in elements of connection, including coaxial, triaxial and quadrax contacts;
-   the conditions for qualification, acceptance testing and quality assurance;
-   the test programs and groups.
It is applicable to removable crimp contacts, wrap contacts, solder contacts used in connectors or in other elements of electrical connection.
In case of conflict or missing information between the EN 3155 001 and the product standards, the product standard takes precedence.

Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen - Teil 001: Technische Lieferbedingungen

Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 001 : Spécification technique

Le présent document spécifie :
—   les caractéristiques électriques, mécaniques, d'environnement et dimensionnelles des contacts électriques utilisés dans les organes de connexion, y compris les contacts coaxiaux, triaxiaux et quadrax ;
—   les conditions de qualification, d’essais de réception et d'assurance qualité ;
—   les programmes et les groupes d'essais.
Elle s'applique aux contacts à sertir amovibles, aux contacts pour connexions enroulées, aux contacts à souder utilisés dans les connecteurs ou dans d'autres organes de connexion électrique.
En cas de conflit ou d’information manquante entre l’EN 3155 001 et les normes de produits, la norme de produit doit prévaloir.

Aeronavtika - Električni kontakti za uporabo v veznih elementih - 001. del: Tehnična specifikacija

General Information

• Status: Not Published
• Publication Date: 09-Dec-2024
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2/S 3 - Elements of Connection (Connectors, Contacts, rear accessories, crimping tools
• Current Stage: 4060 - Closure of enquiry - Enquiry
• Start Date: 07-Sep-2023
• Completion Date: 07-Sep-2023
• Ref Project: oSIST prEN 3155-001:2023 - Aerospace series - Electrical contacts used in elements of connection - Part 001: Technical Specification

Relations

• Revises: EN 3155-001:2016 - Aerospace series - Electrical contacts used in elements of connection - Part 001: Technical Specification
• Effective Date: 18-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 3155-001:2023
01-september-2023
Nadomešča:
SIST EN 3155-001:2016
Aeronavtika - Električni kontakti za uporabo v veznih elementih - 001. del:
Tehnična specifikacija
Aerospace series - Electrical contacts used in elements of connection - Part 001:
Technical Specification
Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen -
Teil 001: Technische Lieferbedingungen
Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie
001: Spécification technique
Ta slovenski standard je istoveten z: prEN 3155-001
ICS:
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
oSIST prEN 3155-001:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 3155-001:2023

---------------------- Page: 2 ----------------------
oSIST prEN 3155-001:2023


DRAFT
EUROPEAN STANDARD
prEN 3155-001
NORME EUROPÉENNE

EUROPÄISCHE NORM

June 2023
ICS 49.060
English Version

Aerospace series - Electrical contacts used in elements of
connection - Part 001: Technical Specification
Série aérospatiale - Contacts électriques utilisés dans Luft- und Raumfahrt - Elektrische Kontakte zur
les organes de connexion - Partie 001: Spécification Verwendung in Verbindungselementen - Teil 001:
technique Technische Lieferbedingungen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 3155-001:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 3155-001:2023
prEN 3155-001:2023 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 Conditions of use . 7
4.1 Types of contact . 7
4.2 Temperature classes. 7
4.3 Permissible wires and cables . 8
5 Design and description . 8
5.1 Design .
...