EN 2593-001:2014

Aerospace series - Bases for 10 A electromagnetic plug-in relays, two and four poles double thrown - Part 001: Technical specification

This European Standard specifies the characteristics, installation and mounting dimensions for plug-in relay bases for use with two and four poles double throw relays in accordance with EN 2548 001.
Relay bases in accordance with this standard shall be used at ambient temperatures between 70 °C and 125 °C and at altitudes up to 25 000 m.

Luft- und Raumfahrt - Fassungen für steckbare, elektromagnetische Relais, 10 A, zwei- und vierpolige Wechselschalter - Teil 001: Technische Lieferbedingungen

Série aérospatiale - Socles pour relais électromagnétiques 10 A, embrochables, deux et quatre pôles inverseurs - Partie 001: Spécification technique

Aeronavtika - Vtičnice za elektromagnetne vtične dvopolne in štiripolne releje za 10 A - 001. del: Tehnične specifikacije

Ta evropski standard določa značilnosti, namestitev in mere za montažo vtičnic za vtične releje za uporabo z dvopolnimi in štiripolnimi releji v skladu s standardom EN 2548-001. V skladu s tem standardom je treba vtičnice za releje uporabljati pri temperaturi okolja med −70 °C in 125 °C na nadmorski višini do 25000 m.

General Information

• Status: Published
• Publication Date: 16-Dec-2014
• Withdrawal Date: 29-Jun-2015
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 17-Dec-2014
• Completion Date: 17-Dec-2014
• Ref Project: SIST EN 2593-001:2015 - Aerospace series - Bases for 10 A electromagnetic plug-in relays, two and four poles double thrown - Part 001: Technical specification

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Steckfassung für elektromagnetische Relais 10 A, steckbar, zwei- und vierpolig - Teil 001: Technische LieferbedingungenSérie aérospatiale - Socles pour relais électromagnétiques 10 A, embrochables, deux et quatre pôles inverseurs - Partie 001: Spécification techniqueAerospace series - Bases for 10 A electromagnetic plug-in relays, two and four poles double thrown - Part 001: Technical specification49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 2593-001:2014SIST EN 2593-001:2015en,fr,de01-marec-2015SIST EN 2593-001:2015SLOVENSKI
STANDARD



SIST EN 2593-001:2015



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2593-001
December 2014 ICS 49.060 English Version
Aerospace series - Bases for 10 A electromagnetic plug-in relays, two and four poles double thrown - Part 001: Technical specification
Série aérospatiale - Socles pour relais électromagnétiques 10 A, embrochables, deux et quatre pôles inverseurs - Partie 001: Spécification technique
Luft- und Raumfahrt - Fassungen für steckbare, elektromagnetische Relais, 10 A, zwei- und vierpolige Wechselschalter - Teil 001: Technische LieferbedingungenThis European Standard was approved by CEN on 22 November 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2593-001:2014 ESIST EN 2593-001:2015



EN 2593-001:2014 (E) 2 Contents
Page Foreword .3 Introduction .4 1 Scope .4 2 Normative references .4 3 Terms and definitions .5 4 Design .5 5 Description .6 6 Definition drawings and mass .7 7 Qualification tests .7 8 Quality assurance .9 9 Designation and marking . 12 10 Delivery conditions . 12 11 Packaging . 12 12 Storage . 12
SIST EN 2593-001:2015



EN 2593-001:201
...