EN ISO 9873:2000

Dental hand instrument - Reusable mirrors and handles (ISO 9873:1998)

Migrated from Progress Sheet (TC Comment) (2000-07-10): Revision of EN 29873:1994.

Zahnärztliche Handinstrumente - Wiederverwendbare Spiegel und Handgriffe (ISO 9873:1998)

Diese Internationale Norm beschreibt Anforderungen und Prüfmethoden an wiederverwendbare Spiegel mit einer reflektierenden Oberfläche aus beschichtetem Glas in einem Metallgehäuse und mit einem für die zahnärztliche Anwendung geeigneten Handgriff zur Verwendung im Mund- und Rachenraum.

Instruments dentaires à main - Miroirs et manches de miroirs réutilisables (ISO 9873:1998)

La présente Norme internationale spécifie les exigences et les méthodes d'essai relatives aux miroirs dentaires réutilisables pourvus d'une surface de verre revêtue d'une couche réfléchissante, d'un boitier et d'un manche métalliques, dont l'utilisation convient pour le travail en bouche en art dentaire.

Dental hand instrument - Reusable mirrors and handles (ISO 9873:1998)

General Information

• Status: Withdrawn
• Publication Date: 18-Apr-2000
• Withdrawal Date: 16-May-2017
• ICS: 11.060.20 - Dental equipment
• Technical Committee: CEN/TC 55 - Dentistry
• Drafting Committee: CEN/TC 55 - Dentistry
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 17-May-2017
• Ref Project: SIST EN ISO 9873:2000 - Dental hand instrument - Reusable mirrors and handles (ISO 9873:1998)

Relations

• Replaces: EN 29873:1994 - Reusable metal dental mirrors and handles (ISO 9873:1990)
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 9873:2017 - Dentistry - Intra-oral mirrors (ISO 9873:2017)
• Effective Date: 24-May-2017
• Corrected By: EN ISO 9873:2000/AC:2000 - Dental hand instrument - Reusable mirrors and handles (ISO 9873:1998/Cor.1:2000)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 9873:2000
01-november-2000
1DGRPHãþD
SIST EN 29873:2000
Dental hand instrument - Reusable mirrors and handles (ISO 9873:1998)
Dental hand instrument - Reusable mirrors and handles (ISO 9873:1998)
Zahnärztliche Handinstrumente - Wiederverwendbare Spiegel und Handgriffe (ISO
9873:1998)
Instruments dentaires a main - Miroirs et manches de miroirs réutilisables (ISO
9873:1998)
Ta slovenski standard je istoveten z: EN ISO 9873:2000
ICS:
11.060.25 =RERWHKQLþQLLQVWUXPHQWL Dental instruments
SIST EN ISO 9873:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 9873:2000

---------------------- Page: 2 ----------------------

SIST EN ISO 9873:2000

---------------------- Page: 3 ----------------------

SIST EN ISO 9873:2000

---------------------- Page: 4 ----------------------

SIST EN ISO 9873:2000

---------------------- Page: 5 ----------------------

SIST EN ISO 9873:2000

---------------------- Page: 6 ----------------------

SIST EN ISO 9873:2000
INTERNATIONAL ISO
STANDARD 9873
Second edition
1998-11-01
Dental hand instruments — Reusable
mirrors and handles
Instruments dentaires à main — Miroirs et manches de miroirs réutilisables
A
Reference number
ISO 9873:1998(E)

---------------------- Page: 7 ----------------------

SIST EN ISO 9873:2000
ISO 9873:1998(E)
Page
Contents
1 Scope .1
2 Normative references .1
3 Definitions .1
4 Requirements.2
5 Test methods.5
6 Marking .9
Annex A Bibliography .10
©  ISO 1998
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 • CH-1211 Genève 20 • Switzerland
Internet [e-mail]
Printed in Switzerland
ii

---------------------- Page: 8 ----------------------

SIST EN ISO 9873:2000
© ISO
ISO 9873:1998(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 9873 was prepared by Technical Committee ISO/TC 106, Dentistry, Subcommittee 4,
Dental instruments.
This second edition cancels and replaces the first edition (ISO 9873:1990), of which it constitutes a technical
revision.
Annex A of this International Standard is for information only.
iii

---------------------- Page: 9 ----------------------

SIST EN ISO 9873:2000
©
ISO 9873:1998(E) ISO
Introduction
This International Standard specifies requirements for a type of dental viewing and retracting instrument in common
use throughout the world. However, it is well known that there are also other types of mirrors in use which have
different designs and/or are made of different materials. Amongst these other types are mirrors with plastics cases
and/or stems; mirrors with a polished metal reflecting surface (as opposed to a coated glass surface); mirrors with a
cone socket design; and single-u
...