Aerospace series - Fibre reinforced plastics - Test method - Determination of notched, unnotched and filled hole compression strength

This standard defines a method to be used to determine the compression strength of notched, unnotched and filled hole fibre reinforced plastics.
It is applicable to composite laminates with unidirectional layers or woven fabric reinforcement.
This standard does not give any direction necessary to meet health and safety requirements. It is the responsibility of the user of this standard to consult and establish appropriate health and safety precautions.

Luft- und Raumfahrt - Faserverstärkte Kunststoffe - Prüfverfahren - Bestimmung der Kerbdruckfestigkeit an gekerbten, ungekerbten und gebolzten Probekörpern

Diese Norm legt ein Verfahren fest, das zur Bestimmung der Druckfestigkeit von gekerbten, ungekerbten und gebolzten faserverstärkten Kunststoffen angewendet wird.
Sie gilt für Verbundwerkstoffe mit gleichgerichteten Schichten oder Gewebeverstärkung.
Diese Norm legt keine Anleitung fest, die für das Einhalten der Gesundheits  und Sicherheitsvorschriften erforderlich ist. Es liegt in der Verantwortung des Anwenders dieser Norm, die entsprechenden Gesundheits- und Sicherheitsvorkehrungen zu treffen.

Série aérospatiale - Matières plastiques renforcées de fibres - Méthode d'essai - Détermination de la résistance en compression trouée, lisse et trouée habitée

La présente norme définit une méthode à utiliser pour la détermination de la résistance en compression trouée, lisse et trouée habitée des matières plastiques renforcées de fibres.
Elle est applicable aux composites stratifiés constitués de couches unidirectionnelles ou renforcés de tissu.
La présente norme ne fournit pas d'indication nécessaire pour satisfaire les exigences d'hygiène et de sécurité. Il est de la responsabilité de l’utilisateur de la présente norme de consulter et de mettre en place les précautions d'hygiène et de sécurité appropriées.

Aeronavtika - Z vlakni ojačeni polimerni materiali - Preskusna metoda - Ugotavljanje natezne trdnosti rezanih, nerezanih in zapolnjenih vzorcev

Ta standard določa metodo, ki se uporablja za ugotavljanje tlačne trdnosti rezanih in nezarezanih z vlakni ojačenih polimernih materialov.
Uporablja se za kompozitne laminate z enosmernim sukanjem ali iz z vlakni ojačenega materiala.
Ta standard ne vsebuje nobenih smernic, potrebnih za izpolnjevanje zdravstvenih in varnostnih zahtev. Uporabnik tega standarda se mora posvetovati in določiti ustrezne zdravstvene in varnostne ukrepe.

General Information

Status
Published
Publication Date
24-Nov-2015
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Due Date
25-Nov-2015
Completion Date
25-Nov-2015

Buy Standard

Standard
EN 6036:2016
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 6036:2016
01-februar-2016
$HURQDYWLND=YODNQLRMDþHQLSROLPHUQLPDWHULDOL3UHVNXVQDPHWRGD
8JRWDYOMDQMHQDWH]QHWUGQRVWLUH]DQLKQHUH]DQLKLQ]DSROQMHQLKY]RUFHY

Aerospace series - Fibre reinforced plastics - Test method - Determination of notched,

unnotched and filled hole compression strength

Luft- und Raumfahrt - Faserverstärkte Kunststoffe - Prüfverfahren - Bestimmung der

Kerbdruckfestigkeit an gekerbten, ungekerbten und gebolzten Probekörpern

Série aérospatiale - Matières plastiques renforcées de fibres - Méthode d'essai -

Détermination de la résistance en compression trouée, lisse et trouée habitée
Ta slovenski standard je istoveten z: EN 6036:2015
ICS:
49.025.40 Guma in polimerni materiali Rubber and plastics
83.120 2MDþDQLSROLPHUL Reinforced plastics
SIST EN 6036:2016 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 6036:2016
---------------------- Page: 2 ----------------------
SIST EN 6036:2016
EN 6036
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2015
EUROPÄISCHE NORM
ICS 49.025.40
English Version
Aerospace series - Fibre reinforced plastics - Test method -
Determination of notched, unnotched and filled hole
compression strength

Série aérospatiale - Matières plastiques renforcées de Luft- und Raumfahrt - Faserverstärkte Kunststoffe -

fibres - Méthode d'essai - Détermination de la Prüfverfahren - Bestimmung der Kerbdruckfestigkeit

résistance en compression trouée, lisse et trouée an gekerbten, ungekerbten und gebolzten

habitée Probekörpern
This European Standard was approved by CEN on 10 August 2013.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels

© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 6036:2015 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 6036:2016
EN 6036:2015 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

1 Scope .................................................................................................................................................................... 4

2 Normative references .................................................................................................................................... 4

3 Terms and definitions ................................................................................................................................... 4

4 Principle of the method ................................................................................................................................ 5

5 Designation of the method ........................................................................................................................... 5

6 Apparatus ........................................................................................................................................................... 5

7 Test specimen ................................................................................................................................................... 6

8 Procedure........................................................................................................................................................... 6

9 Presentation of the results .......................................................................................................................... 7

10 Test report ......................................................................................................................................................... 9

---------------------- Page: 4 ----------------------
SIST EN 6036:2016
EN 6036:2015 (E)
European foreword

This document (EN 6036:2015) has been prepared by the Aerospace and Defence Industries

Association of Europe - Standardization (ASD-STAN).

After enquiries and votes carried out in accordance with the rules of this Association, this Standard has

received the approval of the National Associations and the Official Services of the member countries of

ASD, prior to its presentation to CEN.

This European Standard shall be given the status of a national standard, either by publication of an

identical text or by endorsement, at the latest by May 2016, and conflicting national standards shall be

withdrawn at the latest by May 2016.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent

rights.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the

following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,

Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,

France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,

Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and the United Kingdom.
---------------------- Page: 5 ----------------------
SIST EN 6036:2016
EN 6036:2015 (E)
1 Scope

This standard defines a method to be used to determine the compression strength of notched,

unnotched and filled hole fibre reinforced plastics.

It is applicable to composite laminates with unidirectional layers or woven fabric reinforcement.

This standard does not give any direction necessary to meet health and safety requirements. It is the

responsibility of the user of this standard to consult and establish appropriate health and safety

precautions.
2 Normative references

The following documents, in whole or in part, are normatively referenced in this document and are

indispensable for its application. For dated references, only the edition cited applies. For undated

references, the latest edition of the referenced document (including any amendments) applies.

EN 2374, Aerospace series — Glass fibre reinforced mouldings and sandwich composites — Production of

test panels

EN 2489, Aerospace series — Fibre reinforced plastics — Determination of the action of test fluids

EN 2565, Aerospace series — Preparation of carbon fibre reinforced resin panels for test purposes

EN 2743, Aerospace series — Fibre reinforced plastics — Standard procedures for conditioning prior to

testing unaged materials

EN 2823, Aerospace series — Fibre reinforced plastics — Test method for the determination of the effect of

exposure to humid atmosphere on physical and mechanical characteristics
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
notched tensile strength

maximum compression load experienced by the notched test specimen divided by the initial cross

sectional area within the gauge length
3.2
unnotched tensile strength

maximum compression load experienced by the unnotched test specimen divided by the initial cross

sectional area within the gauge length

1) Published as ASD-STAN Prestandard at the date of publication of this standard. http://www.asd-stan.org/

---------------------- Page: 6 ----------------------
SIST EN 6036:2016
EN 6036:2015 (E)
3.3
filled hole compression strength

maximum compression load experienced by the filled hole test specimen divided by the initial gross

cross sectional area within the gauge length
3.4
K value
unnotched compression strength divided by the filled hole compression strength
3.5
K value
unnotched compression strength divided by the notched compression strength
4 Principle of the method

A compression test on unnotched specimen is carried out in order to determine the original material

strength. The same test is performed either on notched or a filled hole
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.