Assistive products for tissue integrity when lying down - Part 5: Resistance to cleaning and disinfection (ISO/DIS 20342-5:2023)

This document specifies a test method to evaluate the effects of liquid cleaners and disinfectants on the properties of waterproof coated textiles that are used as the protective outer surface of assistive products for tissue integrity (APTIs).
The test method is not applicable to outer surfaces of APTIs that are not sufficiently drapeable.
The test addresses degradation by pure chemical contact time only, it does not address degradation by other factors, such as abrasion.

Unterstützende Produkte zur Gewebeintegrität im Liegen - Teil 5: Reinigungs- und Desinfektionsbeständigkeit (ISO/DIS 20342-5:2024)

Produits d’assistance pour l’intégrité des tissus en position allongée - Partie 5: Résistance au nettoyage et à la désinfection (ISO/DIS 20342-5:2023)

Le présent document spécifie une méthode d’essai pour évaluer les effets des détergents et désinfectants liquides sur les propriétés de textiles munis d’un revêtement et imperméables à l’eau qui sont utilisés comme surfaces externes de protection sur les produits d’assistance pour l’intégrité des tissus (PAIT).
La méthode d’essai ne s’applique pas aux surfaces externes des PAIT insuffisamment enveloppants.
L’essai porte sur la dégradation par temps de contact chimique pur uniquement et ne concerne pas la dégradation du fait d’autres facteurs, tels que l’abrasion.

Tehnični pripomočki za celovitost tkiv v ležečem položaju - 5. del: Odpornost proti čiščenju in razkuževanju

General Information

Status
Not Published
Publication Date
25-May-2025
Current Stage
4599 - Dispatch of FV draft to CMC - Finalization for Vote
Start Date
28-May-2024
Due Date
01-Feb-2025
Completion Date
28-May-2024

Buy Standard

Draft
prEN ISO 20342-5:2024 - BARVE
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-januar-2024
Tehnični pripomočki za celovitost tkiv v ležečem položaju - 5. del: Odpornost proti
čiščenju in razkuževanju
Assistive products for tissue integrity when lying down – Part 5: Resistance to cleaning
and disinfection (ISO/DIS 20342-5:2023)
Produits d’assistance pour l’intégrité des tissus en position allongée - Partie 5:
Résistance au nettoyage et à la désinfection (ISO/DIS 20342-5:2023)
Ta slovenski standard je istoveten z: prEN ISO 20342-5
ICS:
11.180.01 Pripomočki za Aids for disabled and
onesposobljene in handicapped persons in
hendikepirane osebe na general
splošno
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT INTERNATIONAL STANDARD
ISO/DIS 20342-5
ISO/TC 173 Secretariat: SIS
Voting begins on: Voting terminates on:
2023-10-31 2024-01-23
Assistive products for tissue integrity when lying down —
Part 5:
Resistance to cleaning and disinfection
ICS: 11.180.01
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 20342-5:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

ISO/DIS 20342-5:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 20342-5
ISO/TC 173 Secretariat: SIS
Voting begins on: Voting terminates on:

Assistive products for tissue integrity when lying down —
Part 5:
Resistance to cleaning and disinfection
ICS: 11.180.01
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 20342-5:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

ISO/DIS 20342-5:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Chemical disinfectants and testing liquids . 1
4.1 General . 1
4.2 Alcohol based disinfectant . 1
4.3 Quaternary based disinfectant . 1
4.4 Active chlorine based disinfectant . 2
4.5 Hydrogen peroxide based disinfectant . 2
5 Principle . 2
6 Test method . 2
7 Limitations of test .3
8 Test report . 3
Bibliography . 5
iii
ISO/DIS 20342-5:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 173, Assistive products.
A list of all parts in th
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.