97.180 - Miscellaneous domestic and commercial equipment
ICS 97.180 Details
Miscellaneous domestic and commercial equipment
Verschiedene Haushaltsgerate
Équipements ménagers et commerciaux divers
Razna oprema za dom in trgovino
General Information
IEC 60335-2-28:2021 is available as IEC 60335-2-28:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60335-2-28:2021 deals with the safety of electric sewing machines for household and similar use, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances, including direct current (DC) supplied appliances and battery-operated appliances.
Overlock machines and electrical sets are within the scope of this standard.
Appliances not intended for normal household use, but that nevertheless can be a source of danger to the public, such as sewing machines intended to be used by laymen in shops and in light industry, are within the scope of this standard.
As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by all persons in and around the home. However, in general, it does not take into account
- persons (including children) whose physical, sensory or mental capabilities; or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction;
- children playing with the appliance.
Attention is drawn to the fact that
- for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements can be necessary;
- in many countries additional requirements are specified by the national health authorities, the national authorities responsible for the protection of labour and similar authorities.
This standard does not apply to
- appliances intended exclusively for industrial purposes;
- appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas).
This fifth edition cancels and replaces the fourth edition published in 2002 and Amendment 1:2008. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) the text has been aligned with IEC 60335-1:2020;
b) some notes have been converted to normative text (Clause 1, 11.7, 22.14, 22.101);
c) clarification of requirements for battery-operated appliances (Clause 1, 3.1.9, 11.7, B.11.1);
d) introduction of limits on the temperature rise of external accessible surfaces (Clause 11);
e) application of test probe 19 has been introduced (8.1.1, 20.2).
This Part 2 is to be used in conjunction with the latest edition of IEC 60335-1 and its amendments unless that edition precludes it; in that case, the latest edition that does not preclude it is used. It was established on the basis of the sixth edition (2020) of that standard.
- Standard36 pagesEnglish and French languagesale 15% off
This document specifies requirements to reduce the risk of asphyxiation from caps for writing and marking instruments. It relates to such instruments which in normal or foreseeable circumstances are likely to be used by children up to the age of 14 years. This document is not applicable to the following: —   writing and marking instruments which are designed or only intended for use by adults, e.g. jewellery pens, expensive fountain pens, professional technical pens; —   transit caps for refills.
- Standard7 pagesEnglish languagesale 15% off
- Draft7 pagesEnglish languagesale 15% off
Deals with the safety of electric projectors and similar appliances, their rated voltage being not more than 250 V, for household and similar purposes. Some examples of appliacnes that are within the scope of this standard are effects projectors, film-strip projectors, microscope projectors, motion-picture projectors, overhead projectors, photographic enlargers, still view and photo-reproduction appliances.
- Standard29 pagesEnglish and French languagesale 15% off
Deals with the safety of electric projectors and similar appliances, their rated voltage being not more than 250 V, for household and similar purposes. Some examples of appliacnes that are within the scope of this standard are effects projectors, film-strip projectors, microscope projectors, motion-picture projectors, overhead projectors, photographic enlargers, still view and photo-reproduction appliances. This consolidated version consists of the third edition (2002) and its amendment 1 (2008). Therefore, no need to order amendment in addition to this publication.
- Standard29 pagesEnglish and French languagesale 15% off
- Standard5 pagesEnglish and French languagesale 15% off
- Standard5 pagesEnglish and French languagesale 15% off
- Standard4 pagesEnglish and French languagesale 15% off
NEXT ACTION: UNDER BT CONSULTATION, CLOSING ON 2019-09-17
HAS&EY ACTION BY 2019-06-17: assessement expected by 2019-06-17
CCM ACTION BY 2019-04-30 (request post-factum assessment) - done
2018-12-07 SW: Waiting for annex ZZ to be added to the publication by BT decision after positive assessment.2017-05-03: D156/C084 - Ratified standards not being made available.
2017-04-20 OD: Publication on hold, No TC reply to proofing
- Amendment7 pagesEnglish languagesale 10% offe-Library read for1 day
NEXT ACTION: UNDER BT CONSULTATION, CLOSING ON 2019-09-17
HAS&EY ACTION BY 2019-06-17: assessement expected by 2019-06-17
CCM ACTION BY 2019-04-30 (request post-factum assessment) - done
2018-12-07 SW: Waiting for annex ZZ to be added to the publication by BT decision after positive assessment.2017-05-03: D156/C084 - Ratified standards not being made available.
2017-04-20 OD: Publication on hold, No TC reply to proofing
- Amendment7 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies product safety labels for burning indoor candles.
- Standard14 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies requirements and test methods for the fire safety of candles intended to be burned indoors.
- Standard15 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard13 pagesEnglish and French languagesale 15% off
- Standard5 pagesEnglish and French languagesale 15% off
This document specifies classification, dimensions, quality and test methods for black leads used for mechanical pencils for general writing, as specified in ISO 20318-1.
- Standard11 pagesEnglish languagesale 15% off
- Standard12 pagesFrench languagesale 15% off
This document specifies classification, dimensions, quality and test methods for hand-held mechanical pencilss which hold and feed out a lead, and are used for general writing. It is also applicable to multi-function pens equipped with a mechanical pencil unit. However, those pencils attached to machinery instruments such as a plotter are excluded.
- Standard9 pagesEnglish languagesale 15% off
- Standard10 pagesFrench languagesale 15% off
This document specifies requirements for lighters to ensure a reasonable degree of safety for normal
use or reasonably foreseeable misuse of such lighters by users.
This document applies to all flame-producing products commonly known as cigarette lighters, cigar
lighters and pipe lighters.
It does not apply to matches and flame-producing products intended solely for igniting materials other
than cigarettes, cigars, and pipes.
- Standard36 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies requirements for lighters to ensure a reasonable degree of safety for normal use or reasonably foreseeable misuse of such lighters by users.
This document applies to all flame-producing products commonly known as cigarette lighters, cigar lighters and pipe lighters.
It does not apply to matches and flame-producing products intended solely for igniting materials other than cigarettes, cigars, and pipes.
- Standard36 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies requirements for utility lighters to ensure a reasonable degree of safety for normal use or reasonably foreseeable misuse of such lighters by users. This document applies to all flame-producing consumer products commonly known as utility lighters (also known as grill lighters, fireplace lighters, lighting rods or gas matches), and similar devices. It does not apply to matches and flame-producing products intended for igniting cigars, pipes and cigarettes.
- Standard24 pagesEnglish languagesale 15% off
- Standard25 pagesFrench languagesale 15% off
This document specifies requirements for lighters to ensure a reasonable degree of safety for normal use or reasonably foreseeable misuse of such lighters by users. This document applies to all flame-producing products commonly known as cigarette lighters, cigar lighters and pipe lighters. It does not apply to matches and flame-producing products intended solely for igniting materials other than cigarettes, cigars, and pipes.
- Standard27 pagesEnglish languagesale 15% off
- Standard28 pagesFrench languagesale 15% off
This European Standard specifies requirements and the test method for evaluating the sooting behaviour of burning indoor candles. It is applicable to single wick candles with a diameter up to 100 mm or equivalent cross sectional area intended to be burned indoors.
NOTE Single wick candles with a diameter above 100 mm or equivalent cross sectional area and multiwick candles cannot be evaluated with this test method for technical reasons. Evaluation of the visible release of soot is a possibility for these candles.
- Standard20 pagesEnglish languagesale 10% offe-Library read for1 day
Deals with the safety of electric battery chargers for household use having an output at safety extra-low voltage, their rated voltage being not more than 250 V. This standard also includes battery chargers intended for use in garages, shops, light industry and on farms.
- Amendment4 pagesEnglish languagesale 10% offe-Library read for1 day
D135/043: Amendment prepared by CLC/TC 61/WG 4 to answer M/392 (LVD - limitation clause)
- Amendment4 pagesEnglish languagesale 10% offe-Library read for1 day
2015-08-10 - TC request cancellation of draft delivered for UAP. A new version will follow.
- Amendment4 pagesEnglish languagesale 10% offe-Library read for1 day
D135/043: Amendment prepared by CLC/TC 61/WG 4 to answer M/392 (LVD - limitation clause)
- Amendment4 pagesEnglish languagesale 10% offe-Library read for1 day
Deals with the safety of electric battery chargers for household use having an output at safety extra-low voltage, their rated voltage being not more than 250 V. This standard also includes battery chargers intended for use in garages, shops, light industry and on farms.
- Amendment4 pagesEnglish languagesale 10% offe-Library read for1 day
Deals with the safety of electric sewing machines for household and similar use, their rated voltage being not more than 250 V for single-phase and 480 V for other appliances. Sewing machines intended for use by laymen in shops and light industry, are within the scope of this standard. This standard does not apply to appliances intended exclusively for industrial purposes, or appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapor or gas).
- Amendment4 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 12757-1:2017 establishes minimum quality requirements for ball point pens (refillable or non-refillable) and refills for general use. Additional requirements for ball point pens for documentary use are given in ISO 12757‑2.
- Standard9 pagesEnglish languagesale 15% off
- Standard9 pagesFrench languagesale 15% off
- Standard9 pagesEnglish languagesale 15% off
- Standard9 pagesFrench languagesale 15% off
ISO 27668-1:2017 establishes minimum quality requirements for gel ink ball pens (refillable and non-refillable) and refills for general use. Additional requirements for gel ink ball pens for documentary use are given in ISO 27668‑2.
- Standard11 pagesEnglish languagesale 15% off
IEC 60335-2-82:2017+A1:2020 deals with the safety of electric commercial amusement machines and personal service machines, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. Examples of appliances that are within the scope of this standard are:
- amusement machines;
- tables;
- bowling machines;
- dartboards;
- driving simulators;
- gaming machines;
- kiddie rides;
- laser shooting appliances;
- pinball machines;
- video games;
- personal service machines;
- card re-value machines;
- currency dispensers;
- luggage lockers;
- weighing machines;
- shoe shining appliances.
As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by users and maintenance persons. For appliances intended to be used in vehicles or on board ships or aircraft, additional requirements may be necessary. This standard does not apply to:
- appliances intended exclusively for household use;
- appliances intended exclusively for industrial purposes;
- appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas);
- appliances for washing cars;
- dispensing appliances and vending machines (IEC 60335-2-75);
- appliances within the scope of IEC 60065, such as jukeboxes and household video games;
- appliances within the scope of IEC 60950-1, such as copying machines, ticket machines and automatic teller machines;
- appliances intended to be used when a trained attendant is present, such as virtual reality systems;
- equipment intended exclusively for fairgrounds, such as carousels;
- self-balancing personal transport devices.
This third edition cancels and replaces the second edition published in 2002 including its Amendment 1 (2008) and its Amendment 2 (2015). This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- It is clarified that 22.44 is not applicable to amusement machines;
- Modified some Notes to make them normative text (5.6, 11.2, 11.8, 15.2.101, 15.2.102, 15.2.104, 15.3, 19.4, 19.101, 24.101, 24.102) and
- Reference to 22.106 is made in Annex R.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. This part 2-82 is to be used in conjunction with the latest edition of IEC 60335-1 and its amendments. It was established on the basis of IEC 60335-1:2010, its Amendment 1:2013 and its Amendment 2:2016. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 12 months or later than 36 months from the date of publication.
Key words: Amusement Machines, Personal Service Machines, Safety
- Standard42 pagesEnglish and French languagesale 15% off
2020-10-02: EC formal rejection from citation LVD 2014/35/EU
2019-09-24 PeC: unflagged for LVD citation after EC feedback
D156/C038 - BT approved the British NC request for modification of an SNC in EN 61242:1997 and invited CCMC to issue the corresponding amendment.
- Amendment3 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 12756:2016 defines terms related to ball point pens and roller ball pens.
- Standard4 pagesEnglish languagesale 15% off
- Standard4 pagesFrench languagesale 15% off
ISO 9177-1:2016 specifies classification, dimensions, performance requirements and testing for hand-held mechanical pencils used for technical drawings.
- Standard7 pagesEnglish languagesale 15% off
- Standard11 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard8 pagesFrench languagesale 15% off
- Standard8 pagesFrench languagesale 15% off
IEC 60335-2-29:2016 is available as IEC 60335-2-29:2016 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60335-2-29:2016 deals with the safety of electric battery chargers for household and similar use having an output not exceeding 120 V ripple-free direct current, their rated voltage being not more than 250 V. Battery chargers intended for charging batteries in a household end use application outside the scope of the IEC 60335 series of standards are within the scope of this standard. Requirements for battery chargers for use by children at least 8 years old without supervision are given in Annex AA. Battery chargers not intended for normal household use, but which nevertheless may be a source of danger to the public, such as battery chargers intended for use in garages, shops, light industry and on farms, are within the scope of this standard. As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by all persons in and around the home. However, in general, it does not take into account persons (including children) whose physical, sensory or mental capabilities; or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction; children playing with the appliance. This standard does not apply to built-in:
- battery chargers, except those for installing in caravans and similar vehicles;
- battery chargers that are part of an appliance, the battery of which is not accessible to the user;
- battery chargers intended exclusively for industrial purposes;
- battery chargers intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas);
- battery chargers for emergency lighting or supply units for electronic equipment. This fifth edition cancels and replaces the fourth edition published in 2002 including its Amendment 1 (2004) and its Amendment 2 (2009). It constitutes a technical revision. The principal changes in this edition as compared with the fourth edition of IEC 60335-2-29 are as follows (minor changes are not listed):
- Revised the drop test to refer to IEC 60068-2-31 (21.101);
- Requirements for supply cords on battery chargers used at low temperatures (25.7);
- Requirements for battery chargers having an output voltage exceeding SELV have been added (1, 3.2.2, 3.4.3, 10.101, 24.4, 25.5, 25.7, 25.8, 25.15. 26.5);
- A classification for battery chargers used outdoors has been added (6.2, 29.2) and some notes in Clause 1, Subclauses 7.1 and 22.102, Figure 101 and Annex AA 11.8 have been converted to normative text. It was established on the basis of the fifth edition (2010) of that standard. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this standard be adopted for implementation nationally not earlier than 12 months or later than 36 months from the date of its publication. Key words: Battery, Battery Charger
This publication is to be read in conjunction with IEC 60335-1:2010.
- Standard45 pagesEnglish and French languagesale 15% off
This standard specifies safety requirements for lighters. These requirements are intended to make the lighters subject to the standard’s provisions resistant to successful operation by children younger than 51 months.
- Standard26 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies child safety requirements for lighters.
This European Standard does not apply to matches or any other lighting device intended primarily for igniting materials other than smoking materials, such as fuel for fireplaces, or for charcoal, or gas-fired grills.
- Standard26 pagesEnglish languagesale 10% offe-Library read for1 day
2016-01-12: no BT decision available about extension of DOW = DOR + 60 months
2015-04-17: Extension of DOW = DOR + 60 Months to be requested to CLC/BT.
- Amendment6 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment5 pagesEnglish languagesale 10% offe-Library read for1 day
Describes the measuring methods applicable to the optoelectronic devices which are not intended to be used in the fibre optic systems or subsystems.
- Standard5 pagesEnglish and French languagesale 15% off
Corrigendum to extend the DOW of A11:2012 to read 2016-04-30
- Corrigendum1 pageEnglish languagesale 10% offe-Library read for1 day
This International Standard specifies requirements to reduce the risk of asphyxiation from caps
for writing and marking instruments. It relates to such instruments which in normal or foreseeable
circumstances are likely to be used by children up to the age of 14 years.
This International Standard is not applicable to the following:
— writing and marking instruments which are designed or only intended for use by adults, e.g. jewellery
pens, expensive fountain pens, professional technical pens;
— transit caps for refills.
- Standard7 pagesEnglish languagesale 15% off
- Standard12 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment5 pagesEnglish languagesale 10% offe-Library read for1 day
This part of the IEC 60598 series specifies requirements for household aquarium luminaires incorporating electric light sources on supply voltages not exceeding 1000 V.
- Standard14 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 60335-2-41:2012 deals with the safety of electric pumps for liquids having a temperature not exceeding 90 °C, intended for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. Examples of appliances within the scope of this standard are aquarium pumps, pumps for garden ponds, shower-boost pumps, sludge pumps, submersible pumps, table fountain pumps and vertical wet pit pumps. This fourth edition cancels and replaces the third edition published in 2002 including its Amendment 1 (2004) and its Amendment 2 (2009). It constitutes a technical revision. The principal changes in this edition as compared with the third edition of IEC 60335-2-41 are as follows:
- added a normative reference to IEC 60364-7-702 and updated the title for IEC 60364-7-701,
- clarified the normal operation for pumps in 3.1.9,
- added requirements for deep well pumps in 3.105 and 25.8,
- modified 15.102 to indicate that the tube connecting the inlet to the outlet may go via a tank containing a suitable volume of water so as to avoid overheating the pump,
- deleted references in the bibliography and deleted or converted to normative the notes from 7.1, 22.101, and 22.106. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 12 months or later than 36 months from the date of publication. Keywords: Pumps, submersible, sludge, shower-boost.
- Standard37 pagesEnglish and French languagesale 15% off
2015-01-23: D149/C053: Corrigendum to be issued to extend the DOW to read 2016-04-30 (PR = 59952).
2012-01-18 - Publication editing allocated to cpalagi@cencenelec.eu * D135/043: Amendment prepared by CLC/TC 61/WG 4 to answer M/392 (LVD - limitation clause)
- Amendment6 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 62637-1:2011 defines a charging interface between small handheld multimedia devices and power-supply accessories, specifically chargers. Devices, which could be based on this standard may vary over time, but have to comply with the limited power available. The interface is a 2 mm barrel type charging interface. The French version of this standard has not been voted upon. This bilingual version (2011-07) replaces the English version.
- Standard24 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 62637-2:2011 provides the conformance testing rules and guidelines for equipment built to meet the 2 mm barrel type charging interface specified in the 62637-1. This bilingual version (2011-07) replaces the English version.
- Standard21 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 62637-1:2011 defines a charging interface between small handheld multimedia devices and power-supply accessories, specifically chargers. Devices, which could be based on this standard may vary over time, but have to comply with the limited power available. The interface is a 2 mm barrel type charging interface. The French version of this standard has not been voted upon. This bilingual version (2011-07) replaces the English version.
- Standard42 pagesEnglish and French languagesale 15% off
IEC 62637-2:2011 provides the conformance testing rules and guidelines for equipment built to meet the 2 mm barrel type charging interface specified in the 62637-1. This bilingual version (2011-07) replaces the English version.
- Standard36 pagesEnglish and French languagesale 15% off
Amandma A2:2011 je dodatek k standardu SIST EN 60335-2-29:2004
Deals with the safety of electric battery chargers for household use having an output at safety extra-low voltage, their rated voltage being not more than 250 V. This standard also includes battery chargers intended for use in garages, shops, light industry and on farms.
- Amendment5 pagesEnglish languagesale 10% offe-Library read for1 day