EN 2468:2019
(Main)Aerospace series - Steel FE-PA11 - Softened - Tubes - 0,5 mm ≤ a ≤ 5 mm
Aerospace series - Steel FE-PA11 - Softened - Tubes - 0,5 mm ≤ a ≤ 5 mm
This document specifies the requirements relating to:
Steel FE-PA11
Softened
Tubes
0,5 mm ≤ a ≤ 5 mm
for aerospace applications.
Luft- und Raumfahrt - Stahl FE-PA11 - Abgeschreckt - Rohre - 0,5 mm ≤ a ≤ 5 mm
Dieses Dokument legt die Anforderungen an:
Stahl FE PA11
Abgeschreckt
Rohre
0,5 mm ≤ a ≤ 5 mm
für Anwendungen in der Luft- und Raumfahrt fest.
Série aérospatiale - Acier FE-PA11 - Trempé - Tubes - 0,5 mm ≤ a ≤ 5 mm
Aeronavtika - Jeklo FE-PA11 - Utrjeno in mehko žarjeno - Cevi - 0,5 mm ≤ a ≤ 5 mm
Ta dokument določa zahteve, ki se nanašajo na:
jeklo FE-PA11,
utrjeno in mehko žarjeno,
cevi,
0,5 mm ≤ a ≤ 5 mm,
za uporabo v aeronavtiki.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2019
$HURQDYWLND-HNOR)(3$8WUMHQRLQPHKNRåDUMHQR&HYLPP”D”PP
$HURVSDFHVHULHV6WHHO)(3$6RIWHQHG7XEHVPP”D”PP
/XIWXQG5DXPIDKUW6WDKO)(3$$EJHVFKUHFNW5RKUHPP”D”PP
6pULHDpURVSDWLDOH$FLHU)(3$7UHPSp7XEHVPP”D”PP
Ta slovenski standard je istoveten z: EN 2468:2019
ICS:
49.025.10 Jekla Steels
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 2468
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2019
EUROPÄISCHE NORM
ICS 49.025.10
English Version
Aerospace series - Steel FE-PA11 - Softened - Tubes - 0,5
mm ≤ a ≤ 5 mm
Série aérospatiale - Acier FE-PA11 - Trempé - Tubes - Luft- und Raumfahrt - Stahl FE-PA11 - Abgeschreckt -
0,5 mm ≤ a ≤ 5 mm Rohre - 0,5 mm ≤ a ≤ 5 mm
This European Standard was approved by CEN on 20 August 2018.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2468:2019 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
European foreword
This document (EN 2468:2019) has been prepared by the Aerospace and Defence Industries Association
of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2019, and conflicting national standards shall
be withdrawn at the latest by October 2019.
Attention is drawn to the possibility that some of the elements of this doc
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.