EN ISO 3449:2005

Earth-moving machinery - Falling-object protective structures - Laboratory tests and performance requirements (ISO 3449:2005)

2004-12-22  Formal vote issued on2004-11-11 was withdrawn by ISO/CS.
TC forecasts given by phone by CEN/TC 151 Secretary on 1999-05-03: best estimates, based on his knowledge and experience (should normally be given by ISO, since this is a VA, ISO Lead case, but it proved impossible to obtain this information). (MAL/1999-05-03).

Erdbaumaschinen - Schutzaufbauten gegen herabfallende Gegenstände - Prüfungen und Anforderungen (ISO 3449:2005)

Diese Internationale Norm beschreibt die Prüfverfahren zur Bestimmung der baulichen Eigenschaften und Anforderungen bei einer repräsentativen Prüfung eines Schutzaufbaus gegen herabfallende Gegenstände (FOPS) für Erdbaumaschinen mit aufsitzendem Maschinenführer, wie in ISO 6165 definiert. Sie gilt sowohl für FOPS, die ein integraler Bestandteil der Maschine sind, als auch für solche, die separat an die Maschine angebaut sind. Sie gilt nicht für FOPS für Müllverdichter, Bagger, Walzen, Grabenfräsen, Rohrleger, Maschinen, die in Verbindung mit einer Arbeitsausrüstung einen zusätzlichen Sitz aufweisen (z. B. Anbau-Heckbagger) oder Maschinen mit einer Leistung < 15 kW.

Engins de terrassement - Structures de protection contre les chutes d'objets - Essais de laboratoire et critères de performance (ISO 3449:2005)

Stroji za zemeljska dela - Zaščita pred padajočimi predmeti - Laboratorijski preskusi in zahteve (ISO 3449:2005)

General Information

• Status: Withdrawn
• Publication Date: 14-Sep-2005
• Withdrawal Date: 16-Sep-2008
• ICS: 53.100 - Earth-moving machinery
• Technical Committee: CEN/TC 151 - Construction equipment and building material machines - Safety
• Drafting Committee: CEN/TC 151/WG 1 - Earth-moving machinery - Safety
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 17-Sep-2008
• Completion Date: 17-Sep-2008
• Directive: 98/37/EC - Machinery
• Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
• Ref Project: SIST EN ISO 3449:2005 - Earth-moving machinery - Falling-object protective structures - Laboratory tests and performance requirements (ISO 3449:2005)

Relations

• Replaces: EN 13627:2000 - Earth-moving machinery - Falling-object protective structures - Laboratory tests and performance requirements (ISO 3449:1992 modified)
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 3449:2008 - Earth-moving machinery - Falling-object protective structures - Laboratory tests and performance requirements (ISO 3449:2005)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 3449:2005
01-december-2005
6WURML]D]HPHOMVNDGHOD=DãþLWDSUHGSDGDMRþLPLSUHGPHWL/DERUDWRULMVNL
SUHVNXVLLQ]DKWHYH,62
Earth-moving machinery - Falling-object protective structures - Laboratory tests and
performance requirements (ISO 3449:2005)
Erdbaumaschinen - Schutzaufbauten gegen herabfallende Gegenstände - Prüfungen
und Anforderungen (ISO 3449:2005)
Engins de terrassement - Structures de protection contre les chutes d'objets - Essais de
laboratoire et criteres de performance (ISO 3449:2005)
Ta slovenski standard je istoveten z: EN ISO 3449:2005
ICS:
53.100 Stroji za zemeljska dela Earth-moving machinery
SIST EN ISO 3449:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN ISO 3449
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2005
ICS 53.100 Supersedes EN 13627:2000
English Version
Earth-moving machinery - Falling-object protective structures -
Laboratory tests and performance requirements (ISO
3449:2005)
Engins de terrassement - Structures de protection contre Erdbaumaschinen - Schutzaufbauten gegen herabfallende
les chutes d'objets - Essais de laboratoire et critères de Gegenstände - Prüfungen und Anforderungen (ISO
performance (ISO 3449:2005) 3449:2005)
This European Standard was approved by CEN on 15 July 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3449:2005: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN ISO 3449:2005 (E)





Foreword


This document (EN ISO 3449:2005) has been prepared by Technical Committee ISO/TC 127
"Earth-moving machinery" in collaboration with Technical Committee CEN/TC 151 "Construction
equipment and building material machines - Safety", the secretariat of which is held by DIN.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by March 2006, and conflicting national
standards shall be withdrawn at the latest by March 2006.

This document supersedes EN 13627:2000.

This document has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association, and supports essential requirements of EU
Directive(s).

For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.


Endorsement notice

The text of ISO 3449:2005 has been approved by CEN as EN ISO 3449:2005 without any
modifications.

2

---------------------- Page: 3 ----------------------

EN ISO 3449:2005 (E)



ANNEX ZA
(informative)

Relationship between this European Standard and the Essential
Requirements of EU Directive 98/37 EEC


This European Standard has been prepared under a mandate given to CEN by the European
Commission and the European Free Trade Association to provide one means of conforming to
Essential Requirements of the New Approach Directive 98/37/EC, Machinery, amended by
98/79/EC.

Once this standard is cited in the Official Journal of the European Communities under that
Directive and has been implemented as a national standard in at least one Member State,
compliance with the normative clauses of this standard, e
...