EN ISO 15651:2017
(Main)Nuclear energy - Determination of total hydrogen content in PuO2 and UO2 powders and UO2, (U,Gd)O2 and (U,Pu)O2 sintered pellets - Inert gas extraction and conductivity detection method (ISO 15651:2015)
Nuclear energy - Determination of total hydrogen content in PuO2 and UO2 powders and UO2, (U,Gd)O2 and (U,Pu)O2 sintered pellets - Inert gas extraction and conductivity detection method (ISO 15651:2015)
ISO 15651:2015 describes a procedure for measuring the total hydrogen content of UO2 and PuO2 powders (up to 2 000 µg/g oxide) and of U02 and (U,Gd)O2 and (U,Pu)O2 pellets (up to 10 µg/g oxide). The total hydrogen content results from adsorbed water, water of crystallization, hydro-carbon, and other hydrogenated compounds which can exist as impurities in the fuel.
Kernenergie - Bestimmung des totalen Wasserstoffgehalts in PuO₂- und UO₂-Pulvern und UO₂-, (U,Gd)O₂- und (U,Pu)O₂-gesinterten Pellets - Trägergasheißextraktion und Leitfähigkeitsbestimmungsverfahren (ISO 15651:2015)
Diese Internationale Norm legt ein Verfahren zur Messung des Gesamtgehalts an Wasserstoff in UO2- und PuO2-Pulvern (bis zu 2 000 μg/g Oxid) und in UO2- und (U,Gd)O2- sowie (U,Pu)O2-Pellets (bis zu 10 μg)/g Oxid) fest. Der Gesamtgehalt an Wasserstoff ergibt sich aus adsorbiertem Wasser, Kristallwasser, Kohlenwasserstoff und anderen hydrierten Verbindungen, die als Verunreinigungen im Brennstoff vorhanden sein können.
Énergie nucléaire - Dosage de la teneur totale en hydrogène de poudres de PuO2 et UO2, et de pastilles frittées d'UO2, (U,Gd)O2 et (U,Pu)O2 - Méthode d'extraction par gaz inerte et méthode de mesure de la conductivité (ISO 15651:2015)
L'ISO 15651:2015 décrit un mode opératoire permettant de mesurer la teneur totale en hydrogène de poudres d'UO2 et PuO2 (jusqu'à 2 000 µg/g d'oxyde) et de pastilles d'UO2, (U,Gd)O2 et (U,Pu)O2 (jusqu'à 10 µg/g d'oxyde). La teneur totale en hydrogène provient de l'eau adsorbée, de l'eau de cristallisation, et des hydrocarbures et autres composés hydrogénés qui peuvent exister à l'état d'impuretés dans le combustible.
Jedrska energija - Ugotavljanje deleža vodika v PuO2 in praških UO2 ter v sintranih peletih UO2, (U,Gd)O2 in (U,Pu)O2 - Metoda z ekstrakcijo inertnih plinov in ugotavljanjem prevodnosti (ISO 15651:2015)
Standard ISO 15651:2015 opisuje postopek za merjenje deleža vodika v praških UO2 in PuO2 (do 2000 µg/g kisika) ter v peletih U02, (U,Gd)O2 in (U,Pu)O2 (do 10 µg/g kisika). Delež vodika je posledica absorbirane vode, vode kristalizacije, ogljikovodika in drugih hidrogeniranih spojin, ki so lahko prisotne v gorivu kot nečistoče.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2017
Jedrska energija - Ugotavljanje deleža vodika v PuO2 in praških UO2 ter v
sintranih peletih UO2, (U,Gd)O2 in (U,Pu)O2 - Metoda z ekstrakcijo inertnih plinov
in ugotavljanjem prevodnosti (ISO 15651:2015)
Nuclear energy - Determination of total hydrogen content in PuO2 and UO2 powders and
UO2, (U,Gd)O2 and (U,Pu)O2 sintered pellets - Inert gas extraction and conductivity
detection method (ISO 15651:2015)
.HUQHQHUJLH%HVWLPPXQJGHVWRWDOHQ:DVVHUVWRIIJHKDOWVLQ3X2"XQG82"3XOYHUQ
XQG82" 8*G 2"XQG 83X 2"JHVLQWHUWH3HOOHWV7UlJHUJDVKHL‰H[WUDNWLRQXQG
/HLWIlKLJNHLWVEHVWLPPXQJVYHUIDKUHQ ,62
Énergie nucléaire - Dosage de la teneur totale en hydrogène de poudres de PuO2 et
UO2, et de pastilles frittées d'UO2, (U,Gd)O2 et (U,Pu)O2 - Méthode d'extraction par gaz
inerte et méthode de mesure de la conductivité (ISO 15651:2015)
Ta slovenski standard je istoveten z: EN ISO 15651:2017
ICS:
27.120.30 Cepljivi materiali in jedrska Fissile materials and nuclear
gorivna tehnologija fuel technology
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 15651
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2017
EUROPÄISCHE NORM
ICS 27.120.30
English Version
Nuclear energy - Determination of total hydrogen content
in PuO2 and UO2 powders and UO2, (U,Gd)O2 and
(U,Pu)O2 sintered pellets - Inert gas extraction and
conductivity detection method (ISO 15651:2015)
Énergie nucléaire - Dosage de la teneur totale en Kernenergie - Bestimmung des totalen
hydrogène de poudres de PuO2 et UO2, et de pastilles Wasserstoffgehalts in PuO2- und UO2-Pulvern und
frittées d'UO2, (U,Gd)O2 et (U,Pu)O2 - Méthode UO2-, (U,Gd)O2- und (U,Pu)O2-gesinterte Pellets -
d'extraction par gaz inerte et méthode de mesure de la Trägergasheißextraktion und
conductivité (ISO 15651:2015) Leitfähigkeitsbestimmungsverfahren (ISO
15651:2015)
This European Standard was approved by CEN on 13 September 2017.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15651:2017 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
The text of ISO 15651:2015 has been prepared by Technical Committee ISO/TC 85 “Nuclear energy,
nuclear technologies, and radiological protection” of the International Organization for Standardization
(ISO) and has been taken over as EN ISO 15651:2017 by Technical Committee CEN/TC 430 “Nuclear
energy, nuclear technologies, and radiological protection” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2018, and conflicting national standards shall be
withdrawn at the latest by April 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 15651:2015 has been approved by CEN as EN ISO 15651:2017 without any modification.
INTERNATIONAL ISO
STANDARD 15651
First edition
2015-02-15
Nuclear energy — Determination of
total hydrogen content in PuO and
UO powders and UO , (U,Gd)O and
2 2 2
(U,Pu)O sintered pellets — Inert gas
extraction and conductivity detection
method
Énergie nucléaire — Dosage de la teneur totale en hydrogène de
poudres de PuO et UO , et de pastilles frittées d’UO , (U,Gd)O et
2 2 2 2
(U,Pu)O — Méthode d’extraction par gaz inerte et méthode de
mesure de la conductivité
Reference number
ISO 15651:2015(E)
©
ISO 2015
ISO 15651:2015(E)
© ISO 2015
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2015 – All rights reserved
ISO 15651:2015(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Principle . 1
4 Interference . 1
5 Reagents and materials . 1
6 Apparatus . 2
7 Sampling . 2
7.1 Sampling procedure . 2
7.1.1 Powders . 2
7.1.2 Pellet . 3
7.2 Preparation . 3
7.2.1 Powder . . 3
7.2.2 Pellet . 3
8 Procedure. 3
8.1 Blank test . 3
8.2 Calibration . 3
8.2.1 Calibration of the analyser . 3
8.2.2 Check of the calibration . 3
8.3 Determination . 4
9 Calculation . 4
10 Precision . 4
11 Test report . 5
ISO 15651:2015(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any
patent rights identified during the development of the document will be in the Introduction and/or on
the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical Barriers
to Trade (TBT), see the following URL: Foreword — Supplementary information.
The committee responsible for this document is ISO/TC 85, Nuclear Energy, Subcommittee SC 5, Fuel
Technology.
iv © ISO 2015 – All rights reserved
INTERNATIONAL STANDARD ISO 15651:2015(E)
Nuclear energy — Determination of total hydrogen content
in PuO and UO powders and UO , (U,Gd)O and (U,Pu)
2 2 2 2
O sintered pellets — Inert gas extraction and conductivity
detection method
1 Scope
This International Standard describes a procedure for measuring the total hydrogen content of UO
and PuO powders (up to 2 000 µg/g oxide) and of UO and (U,Gd)O and (U,Pu)O pellets (up to 10 µg/g
2 2 2 2
oxide). The total hydrogen content results from adsorbed water, water of crystallization, hydrocarbon,
and other hydrogenated compounds which can exist as impurities in the fuel.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.