Road marking materials - Road trials

This document specifies the requirements for conducting road trials for road marking intended for use in both permanent and temporary road marking. Details are given for test sites, for the application of road marking materials on the test sites, for the parameters to be measured and the frequency of the measurements and for the presentation of the results in the form of a test report.

Straßenmarkierungsmaterialien - Feldprüfungen

Dieses Dokument legt die Anforderungen für die Durchführung von Feldprüfungen mit Straßen-markierungen fest, die sowohl für den dauerhaften als auch für vorübergehenden Einsatz vorgesehen sind. Es enthält Einzelheiten zu Prüffeldern, zur Applikation des Straßenmarkierungsmaterials auf den Prüffeldern, zu den zu messenden Parametern, zur Häufigkeit der Messungen und zur Darstellung der Ergebnisse in Form eines Prüfberichtes.

Produits de marquage routier - Essais routiers

La présente Norme européenne spécifie les exigences pour la conduite des expérimentations sur chaussée pour les produits de marquage routier destinés à une utilisation aussi bien permanente que temporaire. Des détails sont donnés pour les sites d’essai, l’application des produits sur ces sites, les paramètres à mesurer et la fréquence des mesurages ainsi que la présentation des résultats sous forme d’un rapport d’essai.

Materiali za označevanje vozišča - Terenski preskusi

General Information

Status
Published
Publication Date
03-Nov-2020
Withdrawal Date
30-May-2021
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
04-Nov-2020
Due Date
06-Jul-2020
Completion Date
04-Nov-2020

Relations

Buy Standard

Standard
EN 1824:2020 - BARVE
English language
35 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-december-2020
Nadomešča:
SIST EN 1824:2011
Materiali za označevanje vozišča - Terenski preskusi
Road marking materials - Road trials
Straßenmarkierungsmaterialien - Feldprüfungen
Produits de marquage routier - Essais routiers
Ta slovenski standard je istoveten z: EN 1824:2020
ICS:
93.080.20 Materiali za gradnjo cest Road construction materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 1824
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2020
EUROPÄISCHE NORM
ICS 93.080.20 Supersedes EN 1824:2011
English Version
Road marking materials - Road trials
Produits de marquage routier - Essais routiers Straßenmarkierungsmaterialien - Feldprüfungen
This European Standard was approved by CEN on 3 August 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1824:2020 E
worldwide for CEN national Members.

Contents Page
European foreword . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Test sites and conditions . 7
4.1 General . 7
4.2 Test sites characteristics and location . 7
4.3 Climatic conditions and classes . 7
Table 1 — Test Field climatic classes . 7
4.4 Road surface conditions and classes . 7
Table 2 — Test field roughness classes . 8
4.5 Roll-over classes . 8
Table 3 — Roll-over classes . 9
4.6 Studded tyres . 9
5 Organization of road trials . 9
5.1 Duration . 9
5.2 Transverse and longitudinal application patterns . 10
5.2.1 General . 10
5.2.2 Transverse pattern . 10
Figure 1 — Example of a transverse pattern showing a measurement column . 10
5.2.3 Longitudinal pattern . 10
Figure 2 — Example of a longitudinal pattern showing a measurement column . 11
6 Application of road markings . 11
6.1 General . 11
6.2 Periods for application . 12
6.3 Conditions suitable for application . 12
6.4 Technical specification for application . 12
6.5 Sampling and measurements . 13
6.5.1 Sampling . 13
6.5.2 Measurement of drying time and weather conditions. 13
6.5.3 Determination of the useful rate(s) of application and the rate(s) of consumption
during application . 13
7 Measurements related to performance . 14
7.1 General . 14
7.2 Parameters . 14
7.3 Measurement areas . 14
7.3.1 Roll-over classes . 14
7.3.2 Position . 14
7.4 Direction of measurements . 15
7.5 Number of measurements in the measurement area . 15
7.6 Periodicity of measurements . 15
Table 4 — Periodicity of measurements . 16
8 Individual test report for road marking . 16
Annex A (normative) Köppen classification. 17
A.1 General . 17
A.2 Step 1: Determine whether a climate is arid/semiarid (climate B) . 17
Table A.1 — Rainfall distribution. 17
A.3 Step 2: If not a B Climate, identify the climate as A, C, D or E according to temperature
data . 17
A.4 Step 3: After identifying A, Bs, Bw, C, D or E, determine the climate subcategories . 18
A.4.1 A climates . 18
A.4.2 B climates . 18
A.4.3 C or D climates . 18
A.4.4 E climates . 18
A.5 Step 4: For C and D climates, determine a third letter . 18
Annex B (normative)  Measurement of the distribution of wheel passages and the
percentage of heavy vehicles . 19
B.1 General . 19
B.2 Definitions . 19
Figure B.1 — Illustration of definitions . 20
B.3 Principles . 20
B.4 Wheel counting measurement system . 20
B.5 Determination of the number of wheel passages . 21
B.5.1 General . 21
B.5.2 Determination of the transversal relative wheel passages distribution for one day . 21
B.5.3 Determination of the number of wheel passages during ΔT . 21
Figure B.2 — Example of number of wheel passages derived during ΔT for light, heavy and all
vehicles . 22
B.5.4 Determination of the percentage of heavy vehicles . 23
B.5.5 Determination of roll over classes . 23
Annex C (normative) Determination of the rate of application and the rate of consumption of
materials during application . 24
C.1 General . 24
C.2 Apparatus . 24
C.3 Determination of the rate of consumption during application . 24
C.4 Determination of the useful rate of application . 25
C.4.1 General . 25
C.4.2 Drop-on/other material . 25
C.4.3 Multiple drop-on and other materials . 25
C.4.4 Determination of the rate of application of the road marking and its components . 25
C.5 Expression of results . 26
Annex D (normative) Drying time determination .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.