prEN 3375-008

Aerospace series - Cable, electrical, for digital data transmission - Part 008: Single braid - Star Quad 100 Ohms - Type KD - Product standard

Luft- und Raumfahrt - Elektrische Leitungen für Digitaldatenübertragungen - Teil 008: Einfach geschirmt - Quad 100 Ohm - Typ KD - Produktnorm

Série aérospatiale - Câbles électriques pour transmission de données numériques - Partie 008 : Simple tresse - Star Quad de 100 ohms - Type KD - Norme de produit

Aeronavtika - Električni kabli za digitalni prenos podatkov - 008. del: Enojni oplet - Štirižilni zvezdasti kabel, 100 ohmov (Quad cable) - Tip KD - Standard za proizvod

General Information

• Status: Not Published
• Publication Date: 13-Feb-2024
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2/S 2 - Cables & Stripping Tools
• Current Stage: 3098 - Decision to reject - Consensus building
• Start Date: 27-May-2008
• Completion Date: 27-May-2008
• Ref Project: oSIST prEN 3375-008:2022 - Aerospace series - Cable, electrical, for digital data transmission - Part 008: Single braid - Star Quad 100 Ohms - Type KD - Product standard

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 3375-008:2022
01-september-2022
Aeronavtika - Električni kabli za digitalni prenos podatkov - 008. del: Enojni oplet -
Štirižilni zvezdasti kabel, 100 ohmov (Quad cable) - Tip KD - Standard za proizvod
Aerospace series - Cable, electrical, for digital data transmission - Part 008: Single braid
- Star Quad 100 Ohms - Type KD - Product standard
Luft- und Raumfahrt - Elektrische Leitungen für Digitaldatenübertragungen - Teil 008:
Einfach geschirmt - Quad 100 Ohm - Typ KD - Produktnorm
Série aérospatiale - Câbles électriques pour transmission de données numériques -
Partie 008 : Simple tresse - Quarte en étoile 100 ohms - Type KD - Norme de produit
Ta slovenski standard je istoveten z: prEN 3375-008
ICS:
29.060.20 Kabli Cables
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
oSIST prEN 3375-008:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 3375-008:2022

---------------------- Page: 2 ----------------------
oSIST prEN 3375-008:2022


DRAFT
EUROPEAN STANDARD
prEN 3375-008
NORME EUROPÉENNE

EUROPÄISCHE NORM

June 2022
ICS 49.060 Will supersede EN 3375-008:2009
English Version

Aerospace series - Cable, electrical, for digital data
transmission - Part 008: Single braid - Star Quad 100 Ohms
- Type KD - Product standard
Série aérospatiale - Câbles électriques pour Luft- und Raumfahrt - Elektrische Leitungen für
transmission de données numériques - Partie 008 : Digitaldatenübertragungen - Teil 008: Einfach
Simple tresse - Quarte en étoile 100 ohms - Type KD - geschirmt - Quad 100 Ohm - Typ KD - Produktnorm
Norme de produit
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 3375-008:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 3375-008:2022
prEN 3375-008:2022 (E)
Contents Page

European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Required characteristics . 5
4.1 Configuration, dimensions, tolerances and mass. 5
4.2 Material . 6
4.3 General characteristics . 6
5 Tests . 6
6 Quality assurance . 11
7 Identification and marking (according to EN 3375-002 and TR 6058) . 11
7.1 Designation . 11
7.2 Short designation . 11
7.3 Marking on cable . 11
7.4 Colour of the marking on the jacket . 12
7.5 Colour of components . 12
8 Packaging . 12
9 Technical specification . 12


2

---------------------- Page: 4 ----------------------
oSIST prEN 3375-008:2022
prEN 3375-008:2022 (E)
European foreword
This document (prEN 3375-008:2022) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 3375-008:2009.
The main changes with respect to the previous edition are listed in the following table.
Table 1 — Main changes to previous edition
prEN/EN Edition Publication Modification Reason and validation
Number Date
prEN 3375 P1 2008–01–31 §1 SCOPE: Add sentence Add complementary
-008 information about T °C
“The cable shall resist a long-term
compatibility regarding
temperature between −65 °C and
environment and cable
+200 °C.
materials.
Moreover, cable materials needs
to have compatibility with 200 °C
peak exposure.”
§5 TESTS Table3, EN3475–402:
Change from “Applicable
T °C = 125 ± 5 °C. shrinking of the Harmonization with AIRBUS
insulation = 0,8 mm max.” to ABS1503 specification
“Not Applicable” on Component
(samples from finished cable)
§5 TESTS Table 3, EN 3475-404:
Change from “Applicable
T °C = 125 ± 5 °C. Mandrel Harmonization with AIRBUS
Ø = 20 mm” to ABS1503 specification
“Not Applicable” on Component
(samples from finished cable)
3

---------------------- Page: 5 ----------------------
oSIST prEN 3375-008:2022
prEN 3375-008:2022 (E)
1 Scope
This document specifies the dimensions, tolerances, required characteristics and the mass of an
AWG 24 shielded quad cable, type KD, intended for high speed (100 Mbit/s) full duplex Ethernet
networks.
Linked to this particular application, the operating temperatures of the cable are between −65 °C and
125 °C.
The cable resists a long-term temperature between −65 °C and +200 °C.
Moreover, cable materials have compatibility with 200 °C peak exposure.
This cable is laser markable, this marking satisfies the requirements of EN 3838.
The characteristics impedance are (100 ± 15) Ω.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 3375-001, Aerospace series - Cable, electrical, for digital data transmission - Part 001: Technical
1)
specification
EN 3375-002, Aerospace series - Cable, electrical, for digital data transmission - Part 002: General
2),
EN 3475 (all parts), Aerospace series — Cables, electrical, aircraft use — Test methods
EN 3838, Aerospace series - Requirements and tests on user-applied markings on aircraft electrical cables
EN 9133, Aerospace series - Quality Management Systems - Qualification Procedure for Aerospace
Standard Products
3)
TR 6058, Aerospace series — Cable code identification list
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 3475-100 apply.
ISO and IEC maintain terminological databases for use in standardization at the following addr
...