EN 4056-005:2023

Aerospace series - Cable ties for harnesses - Part 005: Plastic cable ties with metallic locking devices, operating temperatures -65 °C to 105 °C and -65 °C to 150 °C - Product standard

This document specifies the required characteristics of cable ties with a metallic locking device manufactured from plastics material, for installation under controlled tension on aircraft cable harnesses.
It is used together with EN 4056-001.

Luft- und Raumfahrt - Befestigungsbänder für Leitungsbündel - Teil 005: Befestigungsbänder aus Kunststoff mit Verriegelungssystemen aus Metall, Betriebstemperaturen -65 °C bis 105 °C und -65 °C bis 150 °C - Produktnorm

Série aérospatiale - Frettes de câblage pour harnais - Partie 005 : Frettes en plastique avec languette métallique, températures d’utilisation -65 °C à 105 °C et -65 °C à 150 °C - Norme de produit

Le présent document spécifie les caractéristiques des frettes de câblage fabriquées à partir de matériau plastique, avec une languette métallique, pour installation sous tension contrôlée sur les harnais de câbles dans les aéronefs.
Il est utilisé conjointement avec l’EN 4056-001 :2015.

Aeronavtika - Kabelske spojke za vezalno pasovje - 005. del: Plastične vezice s kovinskimi zapornimi napravami, s stalno delovno temperaturo od –65 °C do 105 °C in od –65 °C do 150 °C - Standard za proizvod

Ta dokument opredeljuje zahtevane lastnosti kabelskih spojk s kovinsko napravo za zaklepanje, proizvedenih iz plastike, za vgradnjo med nadzorovano napetostjo v letalsko vezalno pasovje.
Uporablja se skupaj s standardom EN 4056-001.

General Information

• Status: Published
• Publication Date: 21-Feb-2023
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2/S 8 - Installation Technologies
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 22-Feb-2023
• Completion Date: 22-Feb-2023
• Ref Project: SIST EN 4056-005:2023 - Aerospace series - Cable ties for harnesses - Part 005: Plastic cable ties with metallic locking devices, operating temperatures -65 °C to 105 °C and -65 °C to 150 °C - Product standard

Standards Content (Sample)

SLOVENSKI STANDARD
01-april-2023
Aeronavtika - Kabelske spojke za vezalno pasovje - 005. del: Plastične vezice s
kovinskimi zapornimi napravami, s stalno delovno temperaturo od –65 °C do 105
°C in od –65 °C do 150 °C - Standard za proizvod
Aerospace series - Cable ties for harnesses - Part 005: Plastic cable ties with metallic
locking devices, operating temperatures -65 °C to 105 °C and -65 °C to 150 °C -
Product standard
Luft- und Raumfahrt - Befestigungsbänder für Leitungsbündel - Teil 005:
Befestigungsbänder aus Kunststoff mit Verriegelungssystemen aus Metall,
Betriebstemperaturen -65 °C bis 105 °C und -65 °C bis 150 °C - Produktnorm
Série aérospatiale - Frettes de câblage pour harnais - Partie 005 : Frettes en plastique
avec languette métallique, températures d’utilisation -65 °C à 105 °C et -65 °C à 150 °C -
Norme de produit
Ta slovenski standard je istoveten z: EN 4056-005:2023
ICS:
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 4056-005
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2023
EUROPÄISCHE NORM
ICS 49.060
English Version
Aerospace series - Cable ties for harnesses - Part 005:
Plastic cable ties with metallic locking devices, operating
temperatures -65 °C to 105 °C and -65 °C to 150 °C -
Product standard
Série aérospatiale - Frettes de câblage pour harnais - Luft- und Raumfahrt - Befestigungsbänder für
Partie 005 : Frettes en plastique avec languette Leitungsbündel - Teil 005: Befestigungsbänder aus
métallique, températures d'utilisation -65 °C à 105 °C Kunststoff mit Verriegelungssystemen aus Metall,
et -65 °C à 150 °C - Norme de produit Betriebstemperaturen -65 °C bis 105 °C und -65 °C bis
150 °C - Produktnorm
This European Standard was approved by CEN on 23 October 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4056-005:2023 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Required characteristics . 4
4.1 Dimensions. 4
4.2 Material . 6
4.2.1 Temperature rating (type) . 6
4.2.2 Flammability class . 6
4.2.3 Colour . 6
4.2.4 Smoke density and toxicity . 6
4.3 UV-resistant cable ties . 6
4.4 Application tool . 7
5 Tests and requirements . 7
6 Quality assurance . 9
7 Designation . 9
8 Marking . 9
9 Packaging and storage . 9

European foreword
This document (EN 4056-005:2023) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this
document has received the approval of the National Associations and the Official Services of the
member countries of ASD, prior to its presentation to CEN.
This document shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by August 2023, and conflicting national standards shall be
withdrawn at the latest by August 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject
of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such
patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania
...