Building construction - Sealants - Determination of resistance to compression (ISO 11432:1993)

Hochbau - Fugendichtstoffe - Bestimmung des Druckwiderstands (ISO 11432:1993)

Diese Internationale Norm legt ein Verfahren zur Bestimmung des Druckwiderstands von Dichtstoffen fest, die zur Abdichtung von Fugen im Hochbau verwendet werden.

Construction immobilière - Mastics - Détermination de la résistance à la compression (ISO 11432:1993)

La CEI 60317-21:2013 spécifie les exigences pour les fils de bobinage brasables de section circulaire en cuivre émaillé de classe 155 avec un double revêtement. La sous-couche est à base de résine polyuréthanne, qui peut être modifiée sous réserve de conserver l'identité chimique de la résine initiale et de répondre à toutes les exigences spécifiées pour le fil. La surcouche est à base de résine polyamide. NOTE - Une résine modifiée est une résine qui a subi une modification chimique, ou qui contient un ou plusieurs additifs pour améliorer les résultats obtenus ou les caractéristiques d'utilisation. La gamme des diamètres nominaux des conducteurs couverte par la présente norme est:
- Grade 1: 0,050 mm jusqu'à 1,600 mm compris;
- Grade 2: 0,050 mm jusqu'à 1,600 mm compris. Les diamètres nominaux des conducteurs sont spécifiés dans l'Article 4 de la CEI 60317-0-1:2013. Cette troisième édition annule et remplace la deuxième édition parue en 1990, l'Amendement 1:1997 et l'Amendement 2:1999. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
- un nouveau 3.2.2 contenant des notes générales sur le fil de bobinage intégrées auparavant au domaine d'application;
- la révision des références à la CEI 60317-0-1:2013 pour bien établir que leur application est normative;
- la consolidation de 17.1 et 17.2 des exigences relatives à la brasabilité;
- la modification de l'Article 19, facteur de dissipation diélectrique;
- un nouvel Article 23, détection des microfissures en immersion.
Mots clés: exigences pour les fils de bobinage brasables de section circulaire en cuivre émaillé classe 155, double revêtement

Gradnja objektov - Tesnilne mase - Ugotavljanje odpornosti proti pritisku

General Information

Status
Withdrawn
Publication Date
23-Sep-1997
Withdrawal Date
30-Jun-2005
Technical Committee
Drafting Committee
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Jul-2005
Completion Date
01-Jul-2005

Relations

Buy Standard

Standard
EN ISO 11432:2001
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11432:2001
01-december-2001
Gradnja objektov - Tesnilne mase - Ugotavljanje odpornosti proti pritisku
Building construction - Sealants - Determination of resistance to compression (ISO
11432:1993)
Hochbau - Fugendichtstoffe - Bestimmung des Druckwiderstands (ISO 11432:1993)
Construction immobiliere - Mastics - Détermination de la résistance a la compression
(ISO 11432:1993)
Ta slovenski standard je istoveten z: EN ISO 11432:1997
ICS:
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
SIST EN ISO 11432:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 11432:2001

---------------------- Page: 2 ----------------------

SIST EN ISO 11432:2001

---------------------- Page: 3 ----------------------

SIST EN ISO 11432:2001

---------------------- Page: 4 ----------------------

SIST EN ISO 11432:2001

---------------------- Page: 5 ----------------------

SIST EN ISO 11432:2001

---------------------- Page: 6 ----------------------

SIST EN ISO 11432:2001
INTERNATIONAL ISO
11432
STANDARD
First edition
1993-04-15
Building construction - Sealants -
Determination of resistance to
compression
- D6termina tion de Ia rhistance A
Construction immo&ih&e - Mastics
Ia compression
Reference number
ISO 11432:1993(E)
--

---------------------- Page: 7 ----------------------

SIST EN ISO 11432:2001
ISO 11432:1993(E)
Foreword
ISO (the international Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 11432 was prepared by Technical Committee
I SO/TC 59, Building cons truction, Sub-Committee SC 8, Jointing
products.
0 ISO 1993
All rights reserved. No part of this publication may be reproduced or utilized in any form or
by any means, electronie or mechanical, including photocopying and microfilm, without per-
mission in writing from the publisher.
International Organkation for Standardkation
Case Postale 56 l CH-l 211 Geneve 20 l Switzerland
Printed in Switzerland
ii

---------------------- Page: 8 ----------------------

SIST EN ISO 11432:2001
INTERNATIONAL STANDARD ISO 11432:1993(E)
Building construction - Sealants - Determination of
resistance to compression
5.2 Spacers, for the preparation of the test speci-
1 Scope
mens, of dimensions 12 mm x 12 mm x 12,5 mm,
with non-adherent surface (see figure 1).
This International Standard specifies a method for the
determination of the resistance to compression of
NOTE 1 If the spacers are made of a material to which
sealants used in joints in building construction.
the sealant adheres, their surfaces should be made non-
adherent, e.g. by a thin wax coating.
2 Normative reference
5.3 Non-adherent Substrate, for the preparation of
test specimens, e.g. polytetrafluoroethylene (PTFE)
The following Standard contains provisions which,
film or vellum Paper, preferably on the advice of the
through reference in this text, constitute provisions
sealant manufacturer.
of this International Standard. At the time of publi-
cation, the edition indicated was valid. All Standards
5.4 Ventilated convection-type oven, capable of
are subject to revision, and Parties to agreements
being maintained at 70 “C + 2 “C, and having an air
based on this International Standard are encouraged
exchange rate of 30 + 5 times per hour, for con-
to investigate the possibility of applying the most re-
ditioning according to method B.
cent edition of the Standard indicated below. Mem-
bers of IE
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.