prEN 2997-004

Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 004: Jam-nut mounted receptacle - Product standard

This document specifies the characteristics of jam-nut mounted receptacles in the family of circular electrical connectors coupled by threaded ring.
It applies to the class defined in Table 4.
For contacts, filler plugs, and rear accessories associated with this receptacle, see EN 2997-002. For plugs and protective covers, see EN 2997-008 and EN 2997-009 respectively. For spare jam-nuts and o-rings, see EN 2997-012 and EN 2997-013 respectively.

Luft- und Raumfahrt - Elektrische Rundsteckverbinder mit Schraubkupplung, feuerbeständig oder nicht feuerbeständig, Betriebstemperaturen - 65 °C bis 175 °C konstant, 200 °C konstant, 260 °C Spitze - Teil 004: Fester Steckverbinder mit Mutternbefestigung - Produktnorm

Série aérospatiale - Connecteurs électriques circulaires à accouplement par bague filetée, résistant au feu ou non, températures d'utilisation -65 °C à 175 °C continu, 200 °C continu, 260 °C en pointe - Partie 004 : Embase à fixation par écrou - Norme de produit

Le présent document spécifie les caractéristiques des embases à fixation par écrou de la famille des connecteurs électriques circulaires à accouplement par bague filetée.
Il s'applique aux classes définies dans le Tableau 4.
Pour les contacts, les obturateurs et les accessoires arrière associés à cette embase, voir l’EN 2997-002. Pour les fiches et les bouchons de vol, voir respectivement l’EN 2997-008 et l’EN 2997-009. Pour les écrous de fixation et joints toriques de rechange, voir respectivement l’EN 2997-012 et l’EN 2997-013.

Aeronavtika - Konektorji, električni, okrogli, priključeni z navojnim obročkom, odporni ali neodporni proti ognju, s stalno delovno temperaturo med –65 °C in 175 °C, stalno 200 °C, najvišjo 260 °C - 004. del: Pritrditev z zaklepom matice - Standard za proizvod

General Information

• Status: Not Published
• Publication Date: 24-Apr-2024
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2/S 3 - Elements of Connection (Connectors, Contacts, rear accessories, crimping tools
• Current Stage: 4599 - Dispatch of FV draft to CMC - Finalization for Vote
• Start Date: 19-May-2023
• Completion Date: 19-May-2023
• Ref Project: oSIST prEN 2997-004:2022 - Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 004: Jam-nut mounted receptacle - Product standard

Relations

• Revises: EN 2997-004:2006 - Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 004: Jam-nut mounted receptacle - Product standard
• Effective Date: 02-Mar-2022

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 2997-004:2022
01-junij-2022
Aeronavtika - Konektorji, električni, okrogli, priključeni z navojnim obročkom,

odporni ali neodporni proti ognju, s stalno delovno temperaturo med –65 °C in 175

°C, stalno 200 °C, najvišjo 260 °C - 004. del: Pritrditev z zaklepom matice -
Standard za proizvod

Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-

resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200

°C continuous, 260 °C peak - Part 004: Jam-nut mounted receptacle - Product standard

Luft- und Raumfahrt - Elektrische Rundsteckverbinder mit Schraubkupplung,

feuerbeständig oder nicht feuerbeständig, Betriebstemperaturen - 65 °C bis 175 °C

konstant, 200 °C konstant, 260 °C Spitze - Teil 004: Fester Steckverbinder mit
Mutternbefestigung - Produktnorm

Série aérospatiale - Connecteurs électriques circulaires à accouplement par bague

filetée, résistant au feu ou non, températures d'utilisation -65 °C à 175 °C continu, 200

°C continu, 260 °C en pointe - Partie 004 : Embase à fixation par écrou - Norme de

produit
Ta slovenski standard je istoveten z: prEN 2997-004
ICS:
31.220.10 Vtiči in vtičnice, konektorji Plug-and-socket devices.
Connectors
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
oSIST prEN 2997-004:2022 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 2997-004:2022
---------------------- Page: 2 ----------------------
oSIST prEN 2997-004:2022
DRAFT
EUROPEAN STANDARD
prEN 2997-004
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2022
ICS 49.060 Will supersede EN 2997-004:2006
English Version
Aerospace series - Connectors, electrical, circular, coupled
by threaded ring, fire-resistant or non fire-resistant,
operating temperatures - 65 °C to 175 °C continuous, 200
°C continuous, 260 °C peak - Part 004: Jam-nut mounted
receptacle - Product standard

Série aérospatiale - Connecteurs électriques circulaires Luft- und Raumfahrt - Elektrische Rundsteckverbinder

à accouplement par bague filetée, résistant au feu ou mit Schraubkupplung, feuerbeständig oder nicht

non, températures d'utilisation - 65 °C à 175 °C feuerbeständig, Betriebstemperaturen - 65 °C bis 175

continu, 200 °C continu, 260 °C en pointe - Partie 004 : °C konstant, 200 °C konstant, 260 °C Spitze - Teil 004:

Embase à fixation par écrou - Norme de produit Fester Steckverbinder mit Mutternbefestigung -

Produktnorm

This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-

STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations

which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC

Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are

aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without

notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 2997-004:2022 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 2997-004:2022
prEN 2997-004:2022 (E)
Contents Page

European foreword ............................................................................................................................................ 3

1 Scope .......................................................................................................................................................... 4

2 Normative references .......................................................................................................................... 4

3 Terms and definitions ......................................................................................................................... 4

4 Required characteristics .................................................................................................................... 4

5 Designation ............................................................................................................................................. 9

6 Marking .................................................................................................................................................. 10

7 Technical specification ..................................................................................................................... 10

Annex A (informative) Evolution sheet ..................................................................................................... 11

Bibliography ....................................................................................................................................................... 12

---------------------- Page: 4 ----------------------
oSIST prEN 2997-004:2022
prEN 2997-004:2022 (E)
European foreword

This document (prEN 2997-004:2022) has been prepared by the Aerospace and Defence Industries

Association of Europe — Standardization (ASD-STAN).

After enquiries and votes carried out in accordance with the rules of this Association, this document has

received the approval of the National Associations and the Official Services of the member countries of

ASD-STAN, prior to its presentation to CEN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 2997-004:2006.
---------------------- Page: 5 ----------------------
oSIST prEN 2997-004:2022
prEN 2997-004:2022 (E)
1 Scope

This document specifies the characteristics of jam-nut mounted receptacles in the family of circular

electrical connectors coupled by threaded ring.
It applies to the class defined in Table 4.

For contacts, filler plugs, and rear accessories associated with this receptacle, see EN 2997-002. For plugs

and protective covers, see EN 2997-008 and EN 2997-009 respectively. For spare jam-nuts and o-rings,

see EN 2997-012 and EN 2997-013 respectively.
2 Normative references

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments) applies.

EN 2997-001, Aerospace series — Connectors, electrical, circular, coupled by threaded ring, fire-resistant

or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak

— Part 001
...