Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 004: Jam-nut mounted receptacle - Product standard

This standard specifies the characteristics of jam-nut mounted receptacles in the family of circular electrical connectors coupled by threaded ring.
It applies to the class defined in Table 4.
For contacts, filler plugs and rear accessories associated with this receptacle, see EN 2997-002. For plugs and protective covers, see EN 2997-008 and EN 2997-009 respectively. For spare jam-nuts and o-rings, see EN 2997-012 and EN 2997-013 respectively.

Luft- und Raumfahrt - Elektrische Rundsteckverbinder mit Schraubkupplung, feuerbeständig oder nicht feuerbeständig, Betriebstemperaturen - 65 °C bis 175 °C konstant, 200 °C konstant, 260 °C Spitze - Teil 004: Fester Steckverbinder mit Mutternbefestigung - Produktnorm

Série aérospatiale - Connecteurs électriques circulaires à accouplement par bague filetée, résistant au feu ou non, températures d'utilisation - 65 °C à 175 °C continu, 200 °C continu, 260 °C en pointe - Partie 004 : Embase à fixation par écrou - Norme de produit

Aeronavtika - Konektorji, električni, okrogli, priključeni z navojnim obročkom, odporni ali neodporni proti ognju, s stalno delovno temperaturo med –65 °C in 175 °C, stalno 200 °C, najvišjo 260 °C - 004. del: Pritrditev z zaklepom matice - Standard za proizvod

General Information

Status
Withdrawn
Publication Date
17-Oct-2006
Withdrawal Date
13-Feb-2024
Technical Committee
Drafting Committee
Current Stage

Relations

Buy Standard

Standard
EN 2997-004:2009
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-april-2009
1DGRPHãþD
SIST EN 2997-4:2001
$HURQDYWLND.RQHNWRUMLHOHNWULþQLRNURJOLSULNOMXþHQL]QDYRMQLPREURþNRP
RGSRUQLDOLQHRGSRUQLSURWLRJQMXVVWDOQRGHORYQRWHPSHUDWXURPHG±ƒ&LQ
ƒ&VWDOQRƒ&QDMYLãMRƒ&GHO3ULWUGLWHY]]DNOHSRPPDWLFH
6WDQGDUG]DSURL]YRG
Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-
resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200
°C continuous, 260 °C peak - Part 004: Jam-nut mounted receptacle - Product standard
Luft- und Raumfahrt - Elektrische Rundsteckverbinder mit Schraubkupplung,
feuerbeständig oder nicht feuerbeständig, Betriebstemperaturen - 65 °C bis 175 °C
konstant, 200 °C konstant, 260 °C Spitze - Teil 004: Fester Steckverbinder mit
Mutternbefestigung - Produktnorm
Série aérospatiale - Connecteurs électriques circulaires à accouplement par bague
filetée, résistant au feu ou non, températures d'utilisation - 65 °C à 175 °C continu, 200 °
C continu, 260 °C en pointe - Partie 004 : Embase à fixation par écrou - Norme de
produit
Ta slovenski standard je istoveten z: EN 2997-004:2006
ICS:
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 2997-004
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2006
ICS 49.060 Supersedes EN 2997-4:1997
English Version
Aerospace series - Connectors, electrical, circular, coupled by
threaded ring, fire-resistant or non fire-resistant, operating
temperatures - 65 °C to 175 °C continuous, 200 °C continuous,
260 °C peak - Part 004: Jam-nut mounted receptacle - Product
standard
Série aérospatiale - Connecteurs électriques circulaires à Luft- und Raumfahrt - Elektrische Rundsteckverbinder mit
accouplement par bague filetée, résistant au feu ou non,
Schraubkupplung, feuerbeständig oder nicht
températures d'utilisation - 65 °C à 175 °C continu, 200 °C feuerbeständig, Betriebstemperaturen - 65 °C bis 175 °C
continu, 260 °C en pointe - Partie 004 : Embase à fixation konstant, 200 °C konstant, 260 °C Spitze - Teil 004: Fester
par écrou - Norme de produit Steckverbinder mit Mutternbefestigung - Produktnorm
This European Standard was approved by CEN on 24 June 2006.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2997-004:2006: E
worldwide for CEN national Members.

Contents Page
Foreword.3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Required characteristics.5
5 Designation .9
6 Marking .10
7 Technical specification .10

Foreword
This document (EN 2997-004:2006) has been prepared by the Aerospace and Defence Industries Association
of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by April 2007, and conflicting national standards shall be withdrawn at the
latest by April 2007.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 2997-4:1997.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden,
Switzerland and the United Kingdom.

1 Scope
This standard specifies the characteristics of jam-nut mounted receptacles in the family of circular electrical
connectors coupled by threaded ring.
It applies to the class defined in Table 4.
For contacts, filler plugs and rear accessories associated with this receptacle, see EN 2997-002. For plugs
and protective covers, see EN 2997-008 and EN 2997-009 respectively. For spare jam-nuts and o-rings, see
EN 2997-012 and EN 2997-013 respectively.
2 Normative references
The following referenced documents are indispensable for the application of this do
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.