EN ISO 11148-6:2012

Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners (ISO 11148-6:2012)

ISO 11148-6:2012 applies to hand-held non-electric power tools (hereinafter "assembly power tools for threaded fasteners") intended for tightening or installing of threaded fasteners. The assembly power tools for threaded fasteners can be powered by compressed air, hydraulic fluid or internal combustion engines and are intended for use by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer.
ISO 11148-6:2012 covers air-hydraulic impulse wrenches, impact wrenches, fastener installation tools, nutrunners, open-ended spanners (crow-foot with open-ended socket or tube nut wrench), ratchet wrenches and screwdrivers.
ISO 11148-6:2012 does not cover special requirements and modifications of assembly power tools for threaded fasteners for the purpose of mounting them in fixtures.
ISO 11148-6:2012 deals with all significant hazards, hazardous situations or hazardous events when the tools are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of assembly power tools for threaded fasteners in potentially explosive atmospheres.

Handgehaltene nicht elektrisch betriebene Maschinen - Sicherheitsanforderungen - Teil 6: Maschinen für Schraubverbindungen (ISO 11148-6:2012)

Der vorliegende Teil von ISO 11148 gilt für handgehaltene nicht elektrisch betriebene Maschinen (im Folgenden als Maschinen für Schraubverbindungen bezeichnet), zum Anziehen oder Einsetzen von Befestigungselementen mit Gewinde. Die Maschinen für Schraubverbindungen können von Druckluft, Hydraulikflüssigkeit oder einem Verbrennungsmotor angetrieben werden, sind zum Gebrauch durch einen einzelnen Bediener vorgesehen und werden vom Bediener in seiner Hand oder seinen Händen gehalten, mit oder ohne eine Aufhängung, z. B. eine Ausgleichseinrichtung.
Der vorliegende Teil von ISO 11148 ist anwendbar auf:
-   luft-hydraulische Schlagschrauber;
-   Schlagschrauber;
-   Maschinen zur Installation von Befestigungselementen;
-   Mutterndreher;
-   Winkelschrauber mit offenem Flachkopf (Flachkopfschrauber mit offener Fassung oder Rohrmutter-schrauber);
-   Ratschenschrauber;
-   Schraubendreher.
ANMERKUNG 1   Anhang B enthält Beispiele für Maschinen für Schraubverbindungen.
Der vorliegende Teil von ISO 11148 gilt nicht für die besonderen Anforderungen und Änderungen an Maschinen für Schraubverbindungen zum Zwecke des Spannens in eine Halterung.
Der vorliegende Teil von ISO 11148 behandelt alle signifikanten Gefährdungen, gefährliche Situationen oder Ereignisse, die beim vorgesehenen Gebrauch von Maschinen sowie unter Bedingungen vom Hersteller vor-hersehbaren Missbrauchs auftreten können; ausgenommen die Verwendung von Maschinen für Schraubver-bindungen in explosionsgefährdeten Atmosphären.
ANMERKUNG 2   EN 13463 1 enthält Anforderungen an nicht elektrisch betriebene Geräte für den Einsatz in explosionsgefährdeten Atmosphären.

Machines portatives à moteur non électrique - Exigences de sécurité - Partie 6: Machines d'assemblage pour éléments de fixation filetés (ISO 11148-6:2012)

L'ISO 11148-6:2012 s'applique aux machines portatives non électriques (appelées dans le reste du texte «machine portative d'assemblage pour éléments de fixation filetés» ou «machine portative d'assemblage») utilisées pour le serrage ou la mise en place d'éléments de fixation filetés. Les machines portatives d'assemblage pour éléments de fixation filetés peuvent être alimentées par air comprimé, fluide hydraulique ou moteurs à combustion interne et sont prévues pour être utilisées par un opérateur ou portées par la ou les mains de l'opérateur avec ou sans suspension, par exemple à l'aide d'un équilibreur.
L'ISO 11148-6:2012 couvre les clés à impulsion hydropneumatiques, les clés à choc, les machines pour mise en place d'éléments de fixation, les serreuses, les clés plates (serreuses à renvoi d'axe avec une noix de serrage ouverte ou clé de serrage pour tube), les clés à rochet et les visseuses.
L'ISO 11148-6:2012 ne couvre pas les exigences spécifiques et les modifications des machines portatives d'assemblage pour éléments de fixation filetés destinées à être montées sur un châssis.
L'ISO 11148-6:2012 traite de tous les phénomènes dangereux, situations dangereuses ou événements dangereux significatifs, à l'exception des machines portatives d'assemblage pour éléments de fixation filetés destinées à être utilisées dans une atmosphère potentiellement explosible, lorsqu'elles sont utilisées normalement et lorsqu'elles font l'objet d'un mauvais usage raisonnablement prévisible par le fabricant.

Neelektrična ročna orodja - Varnostne zahteve - 6. del: Orodja za vijačne zveze (ISO 11148-6:2012)

Ta del standarda ISO 11148 se uporablja za ročna neelektrična orodja (v nadaljnjem besedilu: orodja za vijačne zveze), namenjena stiskanju ali pritrjevanju navojev. Orodja za vijačne zveze lahko napaja stisnjen zrak, hidravlična tekočina ali motorji z notranjim zgorevanjem; uporabljal naj bi jih upravljavec in jih držal z eno ali obema rokama z ali brez vzmetenja, npr. z balanserjem. Ta del standarda ISO 11148 zajema – zračne hidravlične udarne vijačnike; – udarne vijačnike; – orodja za pritrjevanje/zabijanje; – izvijače; – odprte vijačne ključe (odprti univerzalni viličasti ključ ali vijačnik za cevne matice); – vijačnike z zaskočko; – privijala. Ta del standarda ISO 11148 ne obravnava posebnih zahtev in prilagoditev orodij za vijačne zveze za namestitev na stojalo. Ta del standarda ISO 11148 opisuje vsa večja tveganja, nevarne situacije ali nevarne dogodke, kadar se orodja uporabljajo v skladu z njihovim namenom in pod pogoji pričakovane nepravilne uporabe, ki jih določa proizvajalec, razen uporabe orodij za vijačne zveze v potencialno eksplozivnih okoljih.

General Information

• Status: Published
• Publication Date: 18-Dec-2012
• Withdrawal Date: 29-Jun-2013
• ICS: 25.140.10 - Pneumatic tools
• Technical Committee: CEN/TC 255 - Hand-held, non-electric power tools - Safety
• Drafting Committee: CEN/TC 255 - Hand-held, non-electric power tools - Safety
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 19-Dec-2012
• Completion Date: 19-Dec-2012
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: SIST EN ISO 11148-6:2013 - Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners (ISO 11148-6:2012)

Relations

• Replaces: EN ISO 11148-6:2010 - Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners (ISO 11148-6:2010)
• Effective Date: 15-Aug-2012

Standards Content (Sample)

SLOVENSKI STANDARD
01-maj-2013
1DGRPHãþD
SIST EN ISO 11148-6:2011
1HHOHNWULþQDURþQDRURGMD9DUQRVWQH]DKWHYHGHO2URGMD]DYLMDþQH]YH]H
,62
Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools
for threaded fasteners (ISO 11148-6:2012)
Handgehaltene nicht elektrisch betriebene Maschinen - Sicherheitsanforderungen - Teil
6: Maschinen für Schraubverbindungen (ISO 11148-6:2012)
Machines portatives à moteur non électrique - Exigences de sécurité - Partie 6:
Machines d'assemblage pour éléments de fixation filetés (ISO 11148-6:2012)
Ta slovenski standard je istoveten z: EN ISO 11148-6:2012
ICS:
25.140.10 3QHYPDWLþQDRURGMD Pneumatic tools
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 11148-6
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2012
ICS 25.140.10 Supersedes EN ISO 11148-6:2010
English Version
Hand-held non-electric power tools - Safety requirements - Part
6: Assembly power tools for threaded fasteners (ISO 11148-
6:2012)
Machines portatives à moteur non électrique - Exigences Handgehaltene nicht elektrisch betriebene Maschinen -
de sécurité - Partie 6: Machines d'assemblage pour Sicherheitsanforderungen - Teil 6: Maschinen für
éléments de fixation filetés (ISO 11148-6:2012) Schraubverbindungen (ISO 11148-6:2012)
This European Standard was approved by CEN on 17 December 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11148-6:2012: E
worldwide for CEN national Members.

Contents Page
Foreword . 3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC . 4

Foreword
This document (EN ISO 11148-6:2012) has been prepared by Technical Committee ISO/TC 118
"Compressors and pneumatic tools, machines and equipment" in collaboration with Technical Committee
CEN/TC 255 “Hand-held, non-electric power tools - Safety” the secretariat of which is held by SIS.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2013, and conflicting national standards shall be withdrawn at
the latest by June 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 11148-6:2010.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 11148-6:2012 has been approved by CEN as a EN ISO 11148-6:2012 without any
modification.
Annex ZA
(informative)
Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC
This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide a means of conforming to Essential Requirements of the
New Approach Directive 2006/42/EC on machinery.
Once this standard is cited in the Official Journal of the European Union under that Directive and has been
implemented as a national standard in at least one Member State, compliance with the clauses of this
standard confers, within the limits of the scope of this standard, a presumption of conformity with the
corresponding Essential Requirements of that Directive and associated EFTA regulations.
WARNING — Other requirements and other EU Directives may be applicable to the product(s) falling
within the scope of this standard.

INTERNATIONAL ISO
STANDARD 11148-6
Second edition
2012-12-15
Hand-held non-electric power tools —
Safety requirements —
Part 6:
Assembly power tools for threaded
fasteners
Machines portatives à moteur non électrique — Exigences de sécurité —
Partie 6: Machines d’assemblage pour éléments de fixation filetés
Reference number
ISO 11148-6:2012(E)
©
ISO 2012
ISO 11148-6:2012(E)
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved

ISO 11148-6:2012(E)
Contents Page
Foreword .iv
Introduction . v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
3.1 General definitions . 2
3.2 Definitions related to assembly power tools for threaded fasteners . 4
4 Safety requirements and/or protective measures . 5
4.1 General . 5
4.2 Mechanical safety . 5
4.3 Thermal safety . 6
4.4 Noise reduction . 6
4.5 Vibration . 6
4.6 Materials and substances processed, used or exhausted . 7
4.7 Ergonomics . 7
4.8 Controls . 9
5 Verification .10
5.1 General conditions for tests .10
5.2 Noise .10
5.3 Vibration .10
5.4 Unintentional start .10
5.5 Power tool construction .10
5.6 Structure of verification of safety requirements . 11
6 Information for use . 11
6.1 Marking, signs and written warnings . 11
6.2 Instructions handbook .12
6.3 Operating instructions .17
6.4 Data .17
6.5 Maintenance instructions .18
Annex A (informative) List of significant hazards .19
Annex B (informative) Examples of assembly power tools for threaded fasteners covered by this part of
ISO 11148 .21
Annex C (normative) Symbols for labels and signs.23
Annex D (normative) Additional safety requirements related to internal combustion engine
power tools .25
Bibliography .29
ISO 11148-6:2012(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 11148-6 was prepared by Technical C
...