EN ISO 11144:1996

Dental equipment - Connections for supply and waste lines (ISO 11144:1995)

specifies requirements for the layout of the connections to the supply and waste lines for dental equipment, dental units, apparatus and devices, both as concerns the building plumbing and as mutually related to each other. Also lays down the relative positions, centres and minimum dimensions to accommodate the water, waste-water and suction supply lines, and adjacent spaces destined for electrical lines and compressed air lines for dental services. Covers requirements for all types of dental units and dental treatment centres.

Zahnärztliche Ausrüstung - Anschlüsse für Versorgungs- und Entsorgungsleitungen (ISO 11144:1995)

Diese Internationale Norm spezifiziert die Anforderungen für die Anordnung der Anschlüsse von Versorgungs- und Entsorgungsleitungen für zahnärztliche Behandlungsgeräte, Behandlungseinheiten, -apparate und -vorrichtungen sowohl in Bezug auf die gebäudeseitigen Rohranschlüsse als auch auf deren Verhältnis zueinander.

Matériel dentaire - Raccords pour lignes de distribution et déchets (ISO 11144:1995)

La présente Norme internationale fixe les prescriptions relatives à la disposition des raccordements pour lignes d'alimentation et d'évacuation pour le matériel dentaire, les units dentaires, l'appareillage et les dispositifs divers. Elle concerne également les installations de plomberie des bâtiments. Elle stipule aussi la façon dont les installations doivent être placées les unes par rapport aux autres, les centres et dimensions minimales des arrivées d'eau, des évacuations des eaux usées et des lignes d'aspiration (vide), ainsi que les espaces adjacents où il convient de prévoir des lignes électriques et des conduites d'air comprimé pour assurer les soins dentaires. la présente Norme internationale traite des prescriptions pour tous les types d'units dentaires et de centres de soins dentaires.

Dental equipment - Connections for supply and waste lines (ISO 11144:1995)

General Information

• Status: Withdrawn
• Publication Date: 22-Oct-1996
• Withdrawal Date: 07-Apr-2015
• ICS: 11.060.20 - Dental equipment
• Technical Committee: CEN/TC 55 - Dentistry
• Drafting Committee: CEN/TC 55 - Dentistry
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 08-Apr-2015
• Ref Project: SIST EN ISO 11144:2000 - Dental equipment - Connections for supply and waste lines (ISO 11144:1995)

Relations

• Replaced By: EN ISO 7494-2:2015 - Dentistry - Dental units - Part 2: Air, water, suction and wastewater systems (ISO 7494-2:2015)
• Effective Date: 03-Nov-2011

Standards Content (Sample)

SLOVENSKI STANDARD
01-januar-2000
Dental equipment - Connections for supply and waste lines (ISO 11144:1995)
Dental equipment - Connections for supply and waste lines (ISO 11144:1995)
Zahnärztliche Ausrüstung - Anschlüsse für Versorgungs- und Entsorgungsleitungen (ISO
11144:1995)
Matériel dentaire - Raccords pour lignes de distribution et déchets (ISO 11144:1995)
Ta slovenski standard je istoveten z: EN ISO 11144:1996
ICS:
11.060.20 =RERWHKQLþQDRSUHPD Dental equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

INTERNATIONAL
ISO
STANDARD
First edition
1995-05-01
Dental equipment - Connections for
supply and waste lines
Ma t&iel den taire - Ratcords pour lignes de distribution et dkhets
Reference nun-her
ISO 11144:1995(E)
ISO 11144:1995(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing lnternational Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 11144 was prepared by Technical Committee
lSO/TC 106, Dentistry, Subcommittee SC 6, Dental equipment.
0 ISO 1995
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronie or mechanical, including photocopying and
microfilm, without Permission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-l 211 Geneve 20 l Switzerland
Printed in Switzerland
ii
0 ISO ISO 11144:1995(E)
Introduction
The designs and instrumentation of dental treatment centres with a dental
unit are continually being improved in Order to meet the requirement of
modern dentistry. The size and relative positions of the Services to be
connected vary depending on the manufacturer and type of unit.
Choice of equipment, particularly in large installations, may have to be
made for the building at an earlier Stage than would otherwise be desir-
able, in Order to determine the arrangement of the plumbing. When re-
placement units are later fitted, major plumbing alteration
...