EN 14670:2005

Surface active agents - Sodium dodecyl sulfate - Analytical method

This European Standard specifies a method for the determination of the active content and molar mass of sodium dodecyl sulphate used as original titre for the titre determination of standard solutions for surface active agents titration.
NOTE   These are used in the mixed indicator two-phase titration (e. g. ISO 2271) and in the potentiometric titration using a surface active agent sensitive electrode (e.g. EN 14480).

Grenzflächenaktive Stoffe - Natriumdodecyulsulfat - Analysenverfahren

Diese Europäische Norm legt ein Verfahren zur Bestimmung des Gehaltes und der mittleren molaren Masse
von Natriumdodecylsulfat, das als Urtitersubstanz für die Bestimmung des Titers von Maßlösungen für die
Titration von grenzflächenaktiven Stoffen eingesetzt wird, fest.
ANMERKUNG Die Titer werden bei der Mischindikator-Zweiphasentitration (z. B. ISO 2271) und bei der potentio-metrischen
Titration mit einer Tensid-sensitiven Elektrode benötigt (z. B. EN 14480).

Agents de surface - Dodécylsulfate de sodium - Méthode d'analyse

Površinsko aktivne snovi – Natrijev dodecil sulfat – Analitska metoda

General Information

• Status: Published
• Publication Date: 21-Jun-2005
• Withdrawal Date: 30-Dec-2005
• ICS: 71.100.40 - Surface active agents
• Technical Committee: CEN/TC 276 - Surface active agents
• Drafting Committee: CEN/TC 276/WG 1 - Methods of analysis
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 31-Oct-2024
• Ref Project: SIST EN 14670:2005 - Surface active agents - Sodium dodecyl sulfate - Analytical method

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2005
Površinsko aktivne snovi – Natrijev dodecil sulfat – Analitska metoda
Surface active agents - Sodium dodecyl sulfate - Analytical method
Grenzflächenaktive Stoffe - Natriumdodecyulsulfat - Analysenverfahren
Agents de surface - Dodécylsulfate de sodium - Méthode d'analyse
Ta slovenski standard je istoveten z: EN 14670:2005
ICS:
71.100.40 Površinsko aktivna sredstva Surface active agents
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 14670
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2005
ICS 71.100.40
English version
Surface active agents - Sodium dodecyl sulfate - Analytical
method
Agents de surface - Dodécylsulfate de sodium - Méthode Grenzflächenaktive Stoffe - Natriumdodecyulsulfat -
d'analyse Analysenverfahren
This European Standard was approved by CEN on 19 May 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14670:2005: E
worldwide for CEN national Members.

Contents
Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Principle.4
4 Reagents.4
5 Apparatus .5
6 Sampling and preparation of the sample .5
7 Procedure .5
8 Expression of results.6
9 Precision.7
10 Test report .7
Annex A (informative) Typical gas chromatogram.8
Annex B (informative) Results of inter-laboratory test .9
Bibliography.10

Foreword
This European Standard (EN 14670:2005) has been prepared by Technical Committee CEN/TC 276 “Surface
active agents”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by December 2005, and conflicting national standards shall be withdrawn at the latest
by December 2005.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark,
Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
1 Scope
This European Standard specifies a method for the determination of the active content and molar mass of sodium
dodecyl sulphate used as original titre for the titre determination of standard solutions for surface active agents
titration.
NOTE These are used in the mixed indicator two-phase titration (e. g. ISO 2271) and in the potentiometric titration using a
surface active agent sensitive electrode (e.g. EN 14480).
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references,
only the edition cited applies. For undated references, the latest edition of the referenced document (including any
amendments) applies.
EN 13267, Surface active agents – Determination of water content – Karl Fischer method.
EN ISO 3696, Water for analytical laboratory use – Specification and test methods (ISO 3696:1987).
ISO 607, Surface active agents and detergents – Methods of sample division.
ISO 894, Surface active agents – Technical sodium primary alkylsulphates – Methods of analysis.
ISO 6844, Surface active agents – Determination of mineral sulfate content – Titrimetric method.
3 Principle
The water content, the sodium sulphate content and the extractable matter content by light petroleum of the test
sample are determined according to the methods respectively described in EN ISO 3696, ISO 894 and ISO 9844
and the active content is calculated by subtracting the water content, the sodium sulphate content and the content
of extractable matter by light petroleum from 100 %. For calculating the average molar mass of the sodium dodecyl
sulphate the fatty alcohols C to C released after acidic hydrolysis are isolated and the C-chain distribution is
10 14
determined by gas chromatography.
4 Reagents
During the analysis, unless otherwise specified, use only reagents of recognized analytical grade which have been
checked in advance as not interfering with the analytical results and water complying with grade 3 as defined in
EN ISO 3696 and in particular use.
a) for the determination of the water content, the reagents specified in EN 13267;
b) for the determination of the sodium sulphate content, the reagents specified in ISO 6844 (or prEN 14880). ;
c) for the determination of extractable matter content by light petroleum, the reagents specified in ISO 894.
5 Apparatus
Normal laboratory apparatus and the following:
5.1 Gas chromatograph, suitable for
...