EN 12221-2:2008
(Main)Changing units for domestic use - Part 2: Test methods
Changing units for domestic use - Part 2: Test methods
This part of EN 12221 specifies test methods that assess the safety of changing units.
It should be noted that the effect of ageing and degradation of materials is not included.
Wickeleinrichtungen für den Hausgebrauch - Teil 2: Prüfverfahren
Dieser Teil von EN 12221 legt Prüfverfahren für die Bewertung der Sicherheit von Wickeleinrichtungen fest.
Es ist zu beachten, dass die Auswirkungen von Alterung und Zersetzung der Werkstoffe nicht Gegenstand dieser Norm sind.
Dispositifs à langer à usage domestique - Partie 2 : Méthodes d'essai
La présente partie de l’EN 12221 spécifie les méthodes d’essai destinées à évaluer la sécurité des dispositifs à langer.
Il convient de noter que l’effet du vieillissement et de la dégradation des matériaux n’est pas pris en compte.
Previjalne mize za domačo uporabo - 2. del: Preskusne metode
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 12221-2:2008
01-oktober-2008
1DGRPHãþD
SIST EN 12221-2:2002
3UHYLMDOQHPL]H]DGRPDþRXSRUDERGHO 3UHVNXVQHPHWRGH
Changing units for domestic use - Part 2: Test methods
Wickeleinrichtungen für den Hausgebrauch - Teil 2: Prüfverfahren
Dispositifs à langer à usage domestique - Partie 2 : Méthodes d'essai
Ta slovenski standard je istoveten z: EN 12221-2:2008
ICS:
97.190 Otroška oprema Equipment for children
SIST EN 12221-2:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 12221-2:2008
---------------------- Page: 2 ----------------------
SIST EN 12221-2:2008
EUROPEAN STANDARD
EN 12221-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2008
ICS 97.190 Supersedes EN 12221-2:1999
English Version
Changing units for domestic use - Part 2: Test methods
Dispositifs à langer - Partie 2 : Méthodes d'essai Wickeleinrichtungen für den Hausgebrauch - Teil 2:
Prüfverfahren
This European Standard was approved by CEN on 18 February 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12221-2:2008: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 12221-2:2008
EN 12221-2:2008 (E)
Contents Page
Foreword .4
1 Scope.5
2 Normative references.5
3 General test conditions.5
3.1 Preliminary preparation.5
3.2 Application of forces.5
3.3 Tolerances.5
3.4 Test sequence.6
4 Test equipment.6
4.1 General.6
4.2 Measuring cones.6
4.3 Finger probes.6
4.4 Test cylinder.7
4.5 Test floor for floor standing units.7
4.6 Test wall for wall mounted units.7
4.7 Test base for bath mounted units.7
4.8 Stops.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.