EN 2591-218:2002

Aerospace series - Elements of electrical and optical connection - Test methods - Part 218: Ageing of terminal lugs and in-line splices by temperature and current cycling

This standard specifies a method for ageing terminal lugs and in-line splices by temperature and current cycling.
It shall be used together with EN 2591-100.

Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 218: Alterung von Kabelschuhen und Stoßverbindern durch zyklische Temperatur- und Strombelastung

Diese Norm legt ein Verfahren zur Alterung von Kabelschuhen und Stoßverbindern durch zyklische Temperatur- und Strombelastung fest.
Sie ist in Verbindung mit EN 2591-100 anzuwenden.

Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 218: Vieillissement des cosses et des prolongateurs par cyclage en température et en courant

Aerospace series - Elements of electrical and optical connection - Test methods - Part 218: Ageing of terminal lugs and in-line splices by temperature and current cycling

General Information

• Status: Published
• Publication Date: 18-Jun-2002
• Withdrawal Date: 30-Dec-2002
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 30-Jun-2017
• Ref Project: SIST EN 2591-218:2004 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 218: Ageing of terminal lugs and in-line splices by temperature and current cycling

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Elements of electrical and optical connection - Test methods - Part 218: Ageing of terminal lugs and in-line splices by temperature and current cyclingLuft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 218: Alterung von Kabelschuhen und Stoßverbindern durch zyklische Temperatur- und StrombelastungSérie aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 218: Vieillissement des cosses et des prolongateurs par cyclage en température et en courantAerospace series - Elements of electrical and optical connection - Test methods - Part 218: Ageing of terminal lugs and in-line splices by temperature and current cycling49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 2591-218:2002SIST EN 2591-218:2004en01-maj-2004SIST EN 2591-218:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 2591-218June 2002ICS 49.060English versionAerospace series - Elements of electrical and optical connection- Test methods - Part 218: Ageing of terminal lugs and in-linesplices by temperature and current cyclingSérie aérospatiale - Organes de connexion électrique etoptique - Méthodes d'essais - Partie 218: Vieillissementdes cosses et des prolongateurs par cyclage entempérature et en courantLuft- und Raumfahrt - Elektrische und optischeVerbindungselemente - Prüfverfahren - Teil 218: Alterungvon Kabelschuhen und Stoßverbindern durch zyklischeTemperatur- und StrombelastungThis European Standard was approved by CEN on 8 February 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 2591-218:2002 ESIST EN 2591-218:2004
...