EN 3684:2007
(Main)Aerospace series - Test methods - Titanium alloy wrought products - Determination of β transus temperature - Metallographic method
Aerospace series - Test methods - Titanium alloy wrought products - Determination of β transus temperature - Metallographic method
This standard specifies the metallographic method for the determination of the transus temperature of titanium alloy wrought products for aerospace applications.
Luft- und Raumfahrt - Prüfverfahren - Kneterzeugnisse aus Titanlegierungen - Bestimmung der ß-Transus-Temperatur - Metallographisches Verfahren
Diese Norm legt das metallographische Verfahren zur Bestimmung der Transus Temperatur von Kneterzeugnissen aus Titanlegierungen für die Luft- und Raumfahrt fest.
Série aérospatiale - Méthodes d'essais - Demi-produits corroyés en alliages de titane - Détermination de la température de transus ß - Méthode métallographique
Aeronavtika - Preskusne metode - Gneteni izdelki iz titanove zlitine - Določevanje temperature ß-transus - Metalografska metoda
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Prüfverfahren - Kneterzeugnisse aus Titanlegierungen - Bestimmung der ß-Transus-Temperatur - Metallographisches VerfahrenSérie aérospatiale - Méthodes d'essais - Demi-produits corroyés en alliages de titane - Détermination de la température de transus ß - Méthode métallographique49.025.30TitanTitaniumICS:Ta slovenski standard je istoveten z:EN 3684:2007SIST EN 3684:2009en,de01-julij-2009SIST EN 3684:2009SLOVENSKI
STANDARD
SIST EN 3684:2009
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3684March 2007ICS 49.025.30 English VersionAerospace series - Test methods - Titanium alloy wroughtproducts - Determination of ß transus temperature -Metallographic methodSérie aérospatiale - Méthodes d'essais - Demi-produitscorroyés en alliages de titane - Détermination de latempérature de transus ß - Méthode métallographiqueLuft- und Raumfahrt - Prüfverfahren - Kneterzeugnisse ausTitanlegierungen - Bestimmung der ß-Transus-Temperatur- Metallographisches VerfahrenThis European Standard was approved by CEN on 5 October 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3684:2007: ESIST EN 3684:2009
EN 3684:2007 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Principle.4 5 Procedure.4 6 Test report.5
SIST EN 3684:2009
EN 3684:2007 (E) 3 Foreword This document (EN 3684:2007) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2007, and conflicting national standards shall be withdrawn at the latest by September 2007. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 3684:2009
EN 3684:2007 (E) 4 1 Scope This sta
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.