Aerospace series - Test methods - Titanium alloy wrought products - Determination of primary α content - Point count method and line intercept method

This standard specifies two methods, the point count method and the line intercept method, for optical microscope determination of primary  content of titanium alloy wrought products, for aerospace applications.

Luft- und Raumfahrt - Prüfverfahren - Kneterzeugnisse aus Titanlegierungen - Bestimmung von Primär-α-Anteilen - Punktzählverfahren und Linienschnittverfahren

Diese Norm legt zwei Verfahren, und zwar das Punktzählverfahren und das Linienschnittverfahren, zur optisch-mikroskopischen Bestimmung von Primär  Anteilen von Kneterzeugnissen aus Titanlegierung für die Luft- und Raumfahrt fest.

Série aérospatiale - Méthodes d'essais - Demi-produits corroyés en alliages de titane - Détermination de la teneur en α primaire - Méthode par comptage de points et méthode par interception de lignes

Aeronavtika - Preskusne metode - Gneteni izdelki iz titanove zlitine - Določevanje primarnega α-deleža - Metoda s štetjem točk in metoda s presekom premice

General Information

Status
Published
Publication Date
27-Mar-2007
Withdrawal Date
29-Sep-2007
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
28-Mar-2007
Completion Date
28-Mar-2007

Buy Standard

Standard
EN 3683:2009
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.SUHPLFHFKQLWWYHUIDKUHQ49.025.30TitanTitaniumICS:Ta slovenski standard je istoveten z:EN 3683:2007SIST EN 3683:2009en,de01-julij-2009SIST EN 3683:2009SLOVENSKI
STANDARD



SIST EN 3683:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3683March 2007ICS 49.025.30 English VersionAerospace series - Test methods - Titanium alloy wroughtproducts - Determination of primary a content - Point countmethod and line intercept methodSérie aérospatiale - Méthodes d'essais - Demi-produitscorroyés en alliages de titane - Détermination de la teneuren a primaire - Méthode par comptage de points etméthode par interception de lignesLuft- und Raumfahrt - Prüfverfahren - Kneterzeugnisse ausTitanlegierungen - Bestimmung von Primär-a-Anteilen -Punktzählverfahren und LinienschnittverfahrenThis European Standard was approved by CEN on 5 October 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3683:2007: ESIST EN 3683:2009



EN 3683:2007 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Principle.4 5 Sampling and sample preparation.4 6 Test methods.4 7 Expression of results.7 8 Test report.7
SIST EN 3683:2009



EN 3683:2007 (E) 3 Foreword This document (EN 3683:2007) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2007, and conflicting national standards shall be withdrawn at the latest by September 2007. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.