Small craft - Craft identification - Coding system (ISO 10087:2006)

ISO 10087:2006 establishes a coding system to achieve identification of any small craft in terms of
identification code of the country of the manufacturer;
identification code of the manufacturer;
serial number;
month and year of manufacture;
model year.
It applies to small craft of all types and materials, of hull length up to 24 m. It does not apply to beach or bathing toys.

Kleine Wasserfahrzeuge - Schiffskörper-Kennzeichnung - Codierungssystem (ISO 10087:2006)

Diese Internationale Norm legt ein Codierungssystem fest, nach dem jedes kleine Wasserfahrzeug zu identifizieren ist.
-   Identifizierungs-Code des Landes;
-   Identifizierungs-Code des Herstellers;
-   Seriennummer;
-   Monat und Jahr der Herstellung;
-   Modelljahr.
Diese Norm gilt für kleine Wasserfahrzeuge aller Bauarten und aus allen Werkstoffen bis 24 m Rumpflänge. Sie gilt nicht für Strand- und Badeboote.

Petits navires - Identification du bateau - Système de codage (ISO 10087:2006)

L'ISO 10087:2006 établit un système de codage permettant l'identification de tout bateau, concernant les aspects suivants:
le code d'identification du pays du constructeur;
le code d'identification du constructeur;
le numéro de série;
le mois et l'année de construction;
l'année modèle.
Elle est applicable aux petits navires de tous types et matériaux, dont la longueur de coque est inférieure ou égale à 24 m. Elle n'est pas applicable aux jouets de plage ou de baignade.

Mala plovila – Identifikacija plovila – Kodirni sistem (ISO 10087:2006)

General Information

Status
Withdrawn
Publication Date
14-Mar-2006
Withdrawal Date
19-Mar-2019
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
20-Mar-2019

RELATIONS

Buy Standard

Standard
EN ISO 10087:2006
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 10087:2006
01-september-2006
1DGRPHãþD
SIST EN ISO 10087:2000
SIST EN ISO 10087:2000/A1:2001
Mala plovila – Identifikacija plovila – Kodirni sistem (ISO 10087:2006)
Small craft - Craft identification - Coding system (ISO 10087:2006)
Kleine Wasserfahrzeuge - Schiffskörper-Kennzeichnung - Codierungssystem (ISO
10087:2006)
Petits navires - Identification du bateau - Systeme de codage (ISO 10087:2006)
Ta slovenski standard je istoveten z: EN ISO 10087:2006
ICS:
35.040 Nabori znakov in kodiranje Character sets and
informacij information coding
47.080 ýROQL Small craft
SIST EN ISO 10087:2006 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 10087:2006
---------------------- Page: 2 ----------------------
SIST EN ISO 10087:2006
EUROPEAN STANDARD
EN ISO 10087
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2006
ICS 47.080 Supersedes EN ISO 10087:1996
English Version
Small craft - Craft identification - Coding system (ISO
10087:2006)

Petits navires - Identification du bateau - Système de Kleine Wasserfahrzeuge - Schiffskörper-Kennzeichnung -

codage (ISO 10087:2006) Codierungssystem (ISO 10087:2006)
This European Standard was approved by CEN on 14 March 2006.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official

versions.

CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,

Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,

Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels

© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10087:2006: E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 10087:2006
EN ISO 10087:2006 (E)
Foreword

This document (EN ISO 10087:2006) has been prepared by Technical Committee ISO/TC 188

"Small craft" in collaboration with Technical Committee CEN/SS T01 "Shipbuilding and maritime

structures", the secretariat of which is held by CMC.

This European Standard shall be given the status of a national standard, either by publication of an

identical text or by endorsement, at the latest by September 2006, and conflicting national

standards shall be withdrawn at the latest by September 2006.
This document supersedes EN ISO 10087:1996.

This document has been prepared under a mandate given to CEN by the European Commission

and the European Free Trade Association, and supports essential requirements of EU Directive(s).

For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this

document.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of the

following countries are bound to implement this European Standard: Austria, Belgium, Cyprus,

Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,

Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,

Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Endorsement notice

The text of ISO 10087:2006 has been approved by CEN as EN ISO 10087:2006 without any

modifications.
---------------------- Page: 4 ----------------------
SIST EN ISO 10087:2006
EN ISO 10087:2006 (E)
ANNEX ZA
(informative)
Relationship between this Standard and the Essential Requirements of
EU Directive 94/25 EC as amended by Directive 2003/44/EC

This Standard has been prepared under a mandate given to CEN by the European Commission

and the European Free Trade Association to provide one means of conforming to Essential

Requirements of the New Approach Directive 94/25/EC as amended by Directive 2003/44/EC.

Once this standard is cited in the Official Journal of the European Communities under that Directive

and has been implemented as a national standard in at least one Member State, compliance with

the normative clauses of this standard given in Table ZA.1 confers, within the limits of the scope of

this standard, a presumption of conformity with the corresponding Essential Requirements of that

Directive and associated EFTA regulations.
Table ZA.1 — Correspondence between this Standard and Directive 94/25/EC
as amended by Directive 2003/44/EC

Clause(s)/Sub-clause(s) of Essential Requirements (ERs) of Qualifying remarks/Notes

this Standard EU Directive 94/25/EC as amended
by Directive 2003/44/EC
All clauses Annex l, Part A, Clause 2.1, Craft
identification

WARNING: Other requirements and other EU Directives may be applicable to the products falling

within the scope of this standard.
---------------------- Page: 5 ----------------------
SIST EN ISO 10087:2006
---------------------- Page: 6 ----------------------
SIST EN ISO 10087:2006
INTERNATIONAL ISO
STANDARD 10087
Third edition
2006-03-15
Small craft — Craft identification —
Coding system
Petits navires — Identification du bateau — Système de codage
Reference number
ISO 10087:2006(E)
ISO 2006
---------------------- Page: 7 ----------------------
SIST EN ISO 10087:2006
ISO 10087:2006(E)
PDF disclaimer

This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but

shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In

downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat

accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.

Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation

parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In

the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

© ISO 2006

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,

electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or

ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2006 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 10087:2006
ISO 10087:2006(E)
Contents Page

Foreword............................................................................................................................................................ iv

1 Scope ..................................................................................................................................................... 1

2 Normative references ........................................................................................................................... 1

3 Terms and definitions........................................................................................................................... 1

4 Composition of craft identification number (CIN) ............................................................................. 2

5 Requirements ........................................................................................................................................ 3

5.1 Size......................................................................................................................................................... 3

5.2 Permanency of marking ...........................................................................................................

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.