Fire protection equipment - Carbon dioxide extinguishing systems for use on premises - Design and installation (ISO 6183:2022, modified)

This document specifies requirements and gives recommendations for the design, installation, testing, maintenance and safety of fixed carbon dioxide firefighting systems in buildings, plants or other structures. It is not applicable to extinguishing systems on ships, in aircraft, on vehicles or on mobile fire appliances, or to below ground systems in the mining industry; nor does it apply to carbon dioxide pre-inerting systems.
Design of systems where unclosable opening(s) of the protected volume exceed a specified area and where the opening(s) can be subject to the effect of wind is not specified, although general guidance on the procedure to be followed in such cases is given (see 7.4.3.2).

Brandschutzeinrichtungen - Kohlenstoffdioxid-Löschanlagen für den Einsatz in Gebäuden - Planung und Einbau (ISO 6183:2022, modifiziert)

Dieses Dokument legt Anforderungen fest und enthält Empfehlungen für die Auslegung, Installation, Prüfung, Instandhaltung und Sicherheit von ortsfesten Kohlenstoffdioxid-Brandbekämpfungsanlagen in Gebäuden, Produktionsanlagen oder anderen Bauwerken. Es ist nicht anwendbar für Löschanlagen auf Schiffen, in Flugzeugen, auf Fahrzeugen oder auf mobilen Feuerlöschgeräten oder für unterirdische Anlagen im Bergbau; ebenfalls ist es nicht anwendbar für Kohlenstoffdioxid-Vorinertisierungsanlagen.
Die Auslegung von Anlagen, mit (einer) nicht verschließbaren Öffnung(en) des geschützten Bereichs, deren Fläche einen festgelegten Wert überschreitet und welche der Auswirkung von Wind ausgesetzt sein kann/können, ist nicht festgelegt, obwohl allgemeine Hinweise auf das in solchen Fällen zu befolgende Verfahren gegeben werden (siehe 7.4.3.2).

Équipement de protection contre l'incendie - Installations d'extinction par dioxyde de carbone utilisées dans les bâtiments - Conception et installation (ISO 6183:2022, modifiée)

Le présent document spécifie les exigences et donne des recommandations pour la conception, l’installation, les essais, la maintenance et la sécurité des installations fixes de lutte contre l’incendie par dioxyde de carbone dans les bâtiments, les usines ou autres structures. Il ne s’applique pas aux installations d’extinction des navires, des aéronefs, des véhicules ou des appareils mobiles d’incendie, ni aux systèmes souterrains de l’industrie minière. Il ne s’applique pas non plus aux systèmes de pré inertage par dioxyde de carbone.
La conception de systèmes dans lesquels la ou les ouvertures non fermées du volume protégé dépassent une surface spécifiée et la ou les ouvertures peuvent être soumises à l’effet du vent n’est pas spécifiée, bien que des recommandations générales sur le mode opératoire à suivre dans de tels cas soient fournies (voir 7.4.3.2).

Oprema za požarno zaščito - Gasilni sistemi z ogljikovim dioksidom za uporabo v prostorih - Načrtovanje in vgradnja (ISO 6183:2022, spremenjen)

General Information

Status
Published
Publication Date
29-Oct-2024
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
30-Oct-2024
Due Date
04-Sep-2024
Completion Date
30-Oct-2024

Buy Standard

Draft
prEN 17966:2023
English language
77 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
oSIST prEN 17966:2023
01-julij-2023
Oprema za požarno zaščito - Gasilni sistemi z ogljikovim dioksidom za uporabo v
prostorih - Načrtovanje in vgradnja (ISO 6183:2022, spremenjen)
Fire protection equipment - Carbon dioxide extinguishing systems for use on premises -
Design and installation (ISO 6183:2022, modified)
Brandschutzeinrichtungen - Kohlenstoffdioxid-Löschanlagen für den Einsatz in
Gebäuden - Planung und Einbau (ISO 6183:2022, modifiziert)
Équipement de protection contre l'incendie - Installations d'extinction par dioxyde de
carbone utilisées dans les bâtiments - Conception et installation (ISO 6183:2022,
modifiée)
Ta slovenski standard je istoveten z: prEN 17966
ICS:
13.220.20 Požarna zaščita Fire protection
oSIST prEN 17966:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN 17966:2023
oSIST prEN 17966:2023
DRAFT
EUROPEAN STANDARD
prEN 17966
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2023
ICS 13.220.20
English Version
Fire protection equipment - Carbon dioxide extinguishing
systems for use on premises - Design and installation (ISO
6183:2022, modified)
Équipement de protection contre l'incendie - Brandschutzeinrichtungen - Kohlenstoffdioxid-
Installations fixes d'extinction par dioxyde de carbone Löschanlagen für den Einsatz in Gebäuden - Planung
utilisées dans les bâtiments - Conception et installation und Einbau (ISO 6183:2022, modifiziert)
(ISO 6183:2022, modifée)
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 191.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17966:2023 E
worldwide for CEN national Members.

oSIST prEN 17966:2023
prEN 17966:2023 (E)
Contents Page
European foreword . 5
Introduction . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 Use and limitations . 11
4.1 General. 11
4.2 Uses for carbon dioxide systems . 11
4.3 Limitations for carbon dioxide systems . 11
4.4 Temperature limitations . 11
5 Safety . 12
5.1 Hazard to personnel . 12
5.2 Safety precautions . 12
5.2.1 Normally occupied and normally unoccupied areas . 12
5.2.2 Warning notices for occupiable areas . 13
5.2.3 Warning notices for unoccupiable areas . 16
5.3 Electrical hazards . 17
5.4 Electrical earthing . 18
5.5 Electrostatic discharge. 18
6 System design . 18
6.1 General. 18
6.1.1 Introduction . 18
6.1.2 Specifications . 19
6.1.3 Working documents . 19
6.2 Carbon dioxide supply . 19
6.2.1 Quality . 19
6.2.2 Quantity . 19
6.2.3 Container arrangement . 20
6.2.4 Storage containers . 21
6.3 Distribution . 23
6.3.1 General. 23
6.3.2 Piping . 24
6.3.3 Fittings . 24
6.3.4 Pipe and valve support . 24
6.3.5 Valves . 25
6.3.6 Nozzles . 26
6.4 Enclosures (total flooding) . 27
6.4.1 Structural strength . 27
6.4.2 Loss through openings . 27
6.4.3 Ventilation systems . 28
6.5 Detection, actuation and control systems . 28
6.5.1 General. 28
6.5.2 Shut-down of plant and equipment . 28
6.5.3 Automatic detection . 28
oSIST prEN 17966:2023
prEN 17966:2023 (E)
6.5.4 Operating devices . 28
6.5.5 Control equipment . 29
6.5.6 Audible alarms and visual indicators . 30
6.6 Local control (LC) and local control stations (LCS) . 31
7 Carbon dioxide flow and concentration calculations . 32
7.1 General . 32
7.2 System flow calculations . 32
7.2.1 General . 32
7.2.2 Friction losses . 32
7.2.3 Pressure drop . 32
7.2.4 Valves and fittings . 33
7.2.5 As-installed calculations . 33
7.2.6 Specific requirements . 33
7.3 Carbon dioxide concentration requirements . 33
7.3.1 Flame extinguishment . 33
7.3.2 Inerting . 34
7.4 Total flooding quantity . 34
7.4.1 General . 34
7.4.2 Design quantity . 34
7.4.3 K factor . 35
B
7.5 Design of local application systems . 38
7.5.1 General . 38
7.5.2 Carbon dioxide requirements . 38
7.5.3 Rate by area method . 39
7.5.4 Rate by volume method . 40
7.6 Duration of protection — total flooding systems .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.