EN 3155-071:2014
(Main)Aerospace series - Electrical contacts used in elements of connection - Part 071: Contacts, electrical, female, type A, crimp, class S - Product standard
Aerospace series - Electrical contacts used in elements of connection - Part 071: Contacts, electrical, female, type A, crimp, class S - Product standard
This European Standard specifies the required characteristics, tests and tooling applicable to female electrical contacts 071, type A, crimp, class S used in elements of connection according to EN 3155-002.
It shall be used together with EN 3155-001.
The associated male contacts are defined in EN 3155-008 and EN 3155-070.
Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen - Teil 071: Elektrische Buchsenkontakte, Typ A, crimpbar, Klasse S - Produktnorm
Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 071: Contacts électriques, femelles, type A, à sertir, classe S - Norme de produit
Aeronavtika - Električni kontakti za uporabo v veznih elementih - 071. del: Kontakti, električni, ženski, tip A, nagubani, razred S - Standard za proizvod
Ta evropski standard določa zahtevane značilnosti, preskuse in orodja za ženske električne kontakte velikosti 071, tipa A, nagubane, razreda S, ki se uporabljajo v veznih elementih v skladu s standardom EN 3155-002. Uporabljati ga je treba s standardom EN 3155-001.
Povezani moški kontakti so določeni v standardu EN 3155-008 in EN 3155-070.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2015
1DGRPHãþD
SIST EN 3155-071:2008
$HURQDYWLND(OHNWULþQLNRQWDNWL]DXSRUDERYYH]QLKHOHPHQWLKGHO
.RQWDNWLHOHNWULþQLåHQVNLWLS$QDJXEDQLUD]UHG66WDQGDUG]DSURL]YRG
Aerospace series - Electrical contacts used in elements of connection - Part 071:
Contacts, electrical, female, type A, crimp, class S - Product standard
Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen -
Teil 071: Elektrische Buchsenkontakte, Typ A, crimpbar, Klasse S - Produktnorm
Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie
071 : Contacts électriques, femelles, type A, à sertir, classe S - Norme de produit
Ta slovenski standard je istoveten z: EN 3155-071:2014
ICS:
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 3155-071
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2014
ICS 49.060 Supersedes EN 3155-071:2007
English Version
Aerospace series - Electrical contacts used in elements of
connection - Part 071: Contacts, electrical, female, type A, crimp,
class S - Product standard
Série aérospatiale - Contacts électriques utilisés dans les Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung
organes de connexion - Partie 071: Contacts électriques, in Verbindungselementen - Teil 071: Elektrische
femelles, type A, à sertir, classe S - Norme de produit Buchsenkontakte, Typ A, crimpbar, Klasse S - Produktnorm
This European Standard was approved by CEN on 14 June 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3155-071:2014 E
worldwide for CEN national Members.
Contents Page
Foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Required characteristics . 6
4.1 Specific characteristics . 6
4.2 Dimensions and mass . 6
4.3 Marking by colour code . 8
4.4 Material, surface treatment . 8
4.5 Permissible cables . 9
4.6 Tooling . 9
4.7 Cable stripping . 10
4.8 Tests . 10
4.9 Gauges . 12
5 Designation . 12
6 Marking . 12
7 Technical specification . 12
Foreword
This document (EN 3155-071:2014) has been prepared by the Aerospace and Defence Industries
Association of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2015, and conflicting national standards shall be withdrawn at
the latest by May 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 3155-071:2007.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus,
Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United
Kingdom.
Introduction
The contacts defined by this standard are derived from those of SAE-AS39029/57 and, intermateable with
those of SAE-AS39029/58.
1 Scope
This European Standard specifies the required characteristics, tests and tooling applicable to female
electrical contacts 071, type A, crimp, class S used in elements of connection according to EN 3155-002.
It shall be used together with EN 3155-001.
The associated male contacts are defined in EN 3155-008 and EN 3155-070.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applie
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.