EN 1347:2007

Adhesives for tiles - Determination of wetting capability

This European Standard describes the test method to be used to determine the wetting capability of ceramic tile adhesives.
This European Standard is applicable to all ceramic tile adhesives for internal or external tile installations on walls and floors.
This European Standard does not contain performance requirements or recommendations for the design and installation of ceramic tiles.
NOTE   Ceramic tile adhesives may also be used for other types of tiles (natural and agglomerated stones etc.), where these do not adversely affect the stones.

Mörtel und Klebstoffe für Fliesen und Platten - Bestimmung der Benetzungsfähigkeit

Diese Europäische Norm beschreibt das Prüfverfahren zur Beurteilung der Benetzungsfähigkeit von Klebstoffen für keramische Belagsmaterialien.
Diese Europäische Norm gilt für alle Mörtel und Klebstoffe für die Verarbeitung keramischer Fliesen und Platten im Dünnbrettverfahren an Wand und Boden, für innen und außen.
Diese Europäische Norm enthält keine Anforderungen und keine Empfehlungen für die Verarbeitung von keramischen Fliesen und Platten.
ANMERKUNG   Mörtel und Klebstoffe für keramische Fliesen und Platten dürfen auch für Fliesen aus anderen Materialarten verwendet werden (Natur , Betonwerksteine usw.), wenn sie keine negativen Wirkungen auf die Materialien haben.

Colles à carrelage - Détermination du pouvoir mouillant

La présente Norme européenne spécifie la méthode d’essai à utiliser pour déterminer le pouvoir mouillant des colles à carrelage.
Elle s’applique à toutes les colles à carrelage destinées à la pose intérieure ou extérieure sur les murs et les sols.
La présente Norme européenne ne contient pas d'exigences performancielles, ni de recommandations de conception et de pose des carreaux et dalles céramiques.
NOTE   Les colles à carrelage peuvent également être utilisées pour la pose d’autres types de carrelages (pierres naturelles ou agglomérées, etc.) si elles sont compatibles avec ces matériaux.

Lepila za ploščice - Ugotavljanje sposobnosti omočenja

General Information

• Status: Withdrawn
• Publication Date: 14-Aug-2007
• Withdrawal Date: 29-Jan-2013
• ICS: 83.180 - Adhesives
• ICS: 91.100.10 - Cement. Gypsum. Lime. Mortar
• Technical Committee: CEN/TC 67 - Ceramic tiles
• Drafting Committee: CEN/TC 67/WG 3 - Adhesives and grouts for tiles
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 30-Jan-2013
• Completion Date: 30-Jan-2013
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/119 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on floorings
• Ref Project: SIST EN 1347:2007 - Adhesives for tiles - Determination of wetting capability

Relations

• Replaces: EN 1347:1996 - Adhesives for tiles - Determination of wetting capability
• Effective Date: 22-Dec-2008
• Replaces: EN 1347:1996/A1:1998 - Adhesives for tiles - Determination of wetting capability
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Adhesives for tiles - Determination of wetting capabilityColles a carrelage - Détermination du pouvoir mouillantMörtel und Klebstoffe für Fliesen und Platten - Bestimmung der BenetzungsfähigkeitTa slovenski standard je istoveten z:EN 1347:2007SIST EN 1347:2007en91.100.10Cement. Mavec. Apno. MaltaCement. Gypsum. Lime. Mortar83.180LepilaAdhesivesICS:SIST EN 1347:1998/A1:2000SIST EN 1347:19981DGRPHãþDSLOVENSKI
STANDARDSIST EN 1347:200701-november-2007







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1347August 2007ICS 83.180; 91.100.10Supersedes EN 1347:1996
English VersionAdhesives for tiles - Determination of wetting capabilityColles à carrelage - Détermination du pouvoir mouillantMörtel und Klebstoffe für Fliesen und Platten - Bestimmungder BenetzungsfähigkeitThis European Standard was approved by CEN on 11 June 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1347:2007: E



EN 1347:2007 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Sampling.4 4 Test conditions.4 5 Test materials and apparatus.4 5.1 General.4 5.2 Glass plates.4 5.3 Concrete slab.4 5.4 Notched trowel.5 5.5 Weight.5 6 Mixing of adhesive.5 7 Procedure.5 8 Test report.6



EN 1347:2007 (E) 3 Foreword This document (EN 1347:2007) has been prepared by Technical Committee CEN/TC 67 “Ceramic tiles”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2008, and conflicting national standards shall be withdrawn at the latest by February 2008. This document supersedes EN 134
...