FprEN 16139
(Main)Furniture - Strength, durability and safety - Requirements and test methods for non-domestic seating
Furniture - Strength, durability and safety - Requirements and test methods for non-domestic seating
This document specifies requirements for the safety, strength and durability of all types of non-domestic seating intended to be used by adults with a weight of not more than 110 kg, including office visitor chairs.
This document does not apply to ranked seating, office work chairs, chairs for educational institutions, outdoor seating and to links for linked seating for which other European Standards exist. It does also not apply to work chairs for industrial use.
This document does not include requirements for the durability of upholstery materials, castors, reclining and tilting mechanisms and seat height adjustment mechanisms.
This document does not include requirements for the resistance to ageing, degradation and flammability.
This document does not include requirements for electrical safety.
Annex A (Informative) contains additional tests.
Annex B (Informative) contains information on the level of test severity in relation to applications.
Annex C (Informative) contains recommended dimensions for non-domestic chairs.
Annex D (Normative) contains a seat side-to-side durability test in D-G points.
Annex E (Informative) contains a rationale for single column seating.
Annex F (Normative) contains test methods for finger entrapment and shear and compression.
Annex G (Normative) contains a test method for durability "Leg rest".
Möbel - Festigkeit, Dauerhaltbarkeit und Sicherheit - Anforderungen an Sitzmöbel für den Nicht-Wohnbereich
Dieses Dokument legt Anforderungen an die Sicherheit, Festigkeit und Dauerhaltbarkeit aller Arten von Sitzmöbel für den Nicht-Wohnbereich fest, die für die Benutzung durch Erwachsene mit einem Körpergewicht von nicht mehr als 110 kg bestimmt sind, einschließlich Büro-Besucherstühle.
Dieses Dokument ist nicht anwendbar für fest montiertes Reihengestühl, Büroarbeitsstühle, Stühle für Bildungseinrichtungen, Außensitzmöbel und Verbindungselemente für Reihenbestuhlung, für die andere Europäische Normen bestehen. Es ist auch nicht anwendbar für industriell genutzte Arbeitsstühle.
Dieses Dokument enthält keine Anforderungen an die Dauerhaltbarkeit von Polstermaterialien, Rollen, Neige- und Kippmechanismen sowie Höhenverstelleinrichtungen an Sitzen.
Dieses Dokument enthält keine Anforderungen an die Beständigkeit gegen Alterung, Qualitätsminderung und Brennbarkeit.
Dieses Dokument enthält keine Anforderungen an die elektrische Sicherheit.
Anhang A (informativ) enthält zusätzliche Prüfungen.
Anhang B (informativ) enthält Informationen zu Prüfstufen im Verhältnis zum Anwendungsbereich.
Anhang C (informativ) enthält empfohlene Maße für Stühle für den Nicht-Wohnbereich.
Anhang D (normativ) enthält ein Verfahren für die Prüfung der Dauerhaltbarkeit des Sitzes an den Punkten D und G bei Belastung von Seite zu Seite.
Anhang E (informativ) enthält eine Begründung für Sitzmöbel mit einzelner Tragsäule.
Anhang F (normativ) enthält Verfahren zur Prüfung von Fang-, Scher- und Klemmstellen der Finger.
Anhang G (normativ) enthält ein Verfahren zur Prüfung der Dauerhaltbarkeit der "Beinauflage".
Mobilier - Résistance, durabilité et sécurité - Exigences applicables aux sièges à usage non domestique
Le présent document spécifie les exigences relatives à la sécurité, à la résistance et à la durabilité de tous les types de sièges à usage non domestique destinés à être utilisés par des adultes d’un poids maximal de 110 kg, y compris les sièges visiteurs de bureau.
Le présent document ne s’applique pas aux sièges assemblés en rangées, aux sièges de travail de bureau, aux sièges pour établissements d’enseignement, aux sièges d’extérieur ou aux assemblages de sièges assemblés pour lesquels il existe d’autres Normes européennes ou projets de Normes européennes. Il ne s’applique pas aux sièges de travail à usage industriel.
Ce document ne comprend aucune exigence concernant la durabilité des matériaux de rembourrage, des roulettes, des mécanismes d’inclinaison et de basculement ou des mécanismes de réglage de la hauteur du siège.
Le présent document ne stipule pas d’exigences pour la résistance au vieillissement, à la dégradation et à l’inflammabilité.
Le présent document n’inclut aucune exigence relative à la sécurité électrique.
L’Annexe A contient des essais supplémentaires.
L’Annexe B contient des informations sur le niveau de sévérité des essais en fonction des applications.
L’Annexe C contient des exigences dimensionnelles pour les sièges visiteurs de bureau.
L’Annexe D contient un essai de durabilité d’un côté à l’autre de l’assise, aux points D-G.
L’Annexe E contient des justifications concernant le siège à colonne unique.
L’Annexe F contient des méthodes d’essai de coincement des doigts, de cisaillement et de compression.
L’Annexe G décrit la résistance au roulement du siège non chargé.
L’Annexe H contient une méthode d’essai de durabilité du « repose-jambes ».
Pohištvo - Trdnost, trajnost in varnost - Zahteve za sedežno pohištvo za javno uporabo
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 16139:2022
01-september-2022
Pohištvo - Trdnost, trajnost in varnost - Zahteve za sedežno pohištvo za javno
uporabo
Furniture - Strength, durability and safety - Requirements for non-domestic seating
Möbel - Festigkeit, Dauerhaltbarkeit und Sicherheit - Anforderungen an Sitzmöbel für
den Nicht-Wohnbereich
Mobilier - Résistance, durabilité et sécurité - Exigences applicables aux sièges à usage
collectif
Ta slovenski standard je istoveten z: prEN 16139
ICS:
97.140 Pohištvo Furniture
oSIST prEN 16139:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
oSIST prEN 16139:2022
oSIST prEN 16139:2022
DRAFT
EUROPEAN STANDARD
prEN 16139
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2022
ICS 97.140 Will supersede EN 16139:2013
English Version
Furniture - Strength, durability and safety - Requirements
for non-domestic seating
Mobilier - Résistance, durabilité et sécurité - Exigences Möbel - Festigkeit, Dauerhaltbarkeit und Sicherheit -
applicables aux sièges à usage collectif Anforderungen an Sitzmöbel für den Nicht-
Wohnbereich
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 207.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16139:2022 E
worldwide for CEN national Members.
oSIST prEN 16139:2022
prEN 16139:2022 (E)
Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Safety, strength and durability . 7
4.1 General requirements . 7
4.2 General requirements . 7
4.3 General requirements . 7
4.3.1 General. 7
4.3.2 Shear and compression points when setting up and folding . 8
4.3.3 Shear and compression points under influence of powered mechanisms . 8
4.3.4 Shear and compression points during use . 8
4.4 Stability . 8
4.5 Test methods . 8
4.5.1 General. 8
4.5.2 Requirements . 10
5 Information for use . 11
6 Test report . 11
Annex A (informative) Additional tests . 12
Annex B (informative) Test severity in relation to applications . 13
Annex C (informative) Dimensional requirements for non-domestic chairs . 14
Annex D (normative) Seat side-to-side durability test at D-G points . 16
D.1 General. 16
D.2 Loading points . 16
D.3 Seat side-to-side durability test in D-G points – procedure . 17
Annex E (informative) Rationale for single column seating . 19
E.1 For term 3.7 Single column seating . 19
E.2 For Table 1, selection of applicability . 19
E.3 For Table 1, test 4. Arm rest sideways static load test EN 1728:2012, 6.10 . 19
E.4 For Table 1, test 10. Seat side-to-side durability test Annex E . 19
E.5 For Table 1, test 14 and 15 (test not applicable for single column seating swivelling)
................................................................................................................................................................... 19
E.6 For Table 1, test 16. Seat impact test EN 1728:2012, 6.24 . 20
Annex F (normative) Test methods for finger entrapment and shear and compression . 21
F.1 Finger entrapment . 21
F.2 Shear and compression . 25
oSIST prEN 16139:2022
prEN 16139:2022 (E)
Annex G (normative) Rolling resistance of the unloaded chair . 27
G.1 General . 27
G.2 Test method . 27
G.3 Requirement . 28
Annex H (normative) Leg rest durability test . 29
H.1 General . 29
H.2 Test method . 29
Bibliography . 32
oSIST prEN 16139:2022
prEN 16139:2022 (E)
European foreword
This document (prEN 16139:2022) has been prepared by Technical Committee CEN/TC 207 “Furniture”,
the secretariat of which is held by UNI.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 16139:2013.
In comparison with the previous edition, the following technical modifications have been made:
a) introduction of single column seating;
b) changes to Annex C (Informative) in terms of dimensional requirements;
c) introduction of “side to side” durability requirements for “single column seating” and “side to side”
test method in Annex D (normative);
d) new Annex E (informative) new rationale for “single column seating”;
e) new Annex F (normative) Test methods for finger entrapment and shear and compression;
f) new Rolling resistance requirement and a new test methods in Annex G (Normative);
g) new introduction of “leg rest” static requirement;
h) introduction of “leg rest” durability requirement with a “leg rest” test method in Annex H
(Normative);
i) introduction of “backward fall test” requirement.
oSIST prEN 16139:2022
prEN 16139:2022 (E)
1 Scope
This document specifies requirements for the safety, strength and durability of all types of non-domestic
seating intended to be used by adults with a weight of not more than 110 kg, including office visitor chairs.
This document does not apply to ranked seating, office work chairs, chairs for educational institutions,
outdoor seating and to links for linked seating for which European Standards or drafts exist. It does also
not apply to work chairs for industrial use.
This document does not include requirements for the durability of upholstery materials, castors, reclining
and tilting mechanisms and seat height adjustment mechanisms.
This document does not include requirements for the resistance to ageing, degradation and flammability.
This document does not include requirements for electrical safety.
Annex A contains additional tests.
Annex B contains information on the level of test severity in relation to applications.
Annex C contains dimensional requirements for office visitor chairs.
Annex D contains a seat side-to-side durability test in D-G points.
Annex E contains a rationale for single column seating.
Annex F contains test methods for finger entrapment and shear and compression.
Annex G describes rolling resistance of the unloaded chair.
Annex H contains a test method for durability “Leg rest”.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
prEN 1022:2022, Furniture - Seating - Determination of stability
EN 1728:2012, Furniture – Seating – Test methods for the determination of strength and durability
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
• IEC Electropedia: available at https://www.electropedia.org/
• ISO Online browsing platform: available at https://www.iso.org/obp
3.1
accessible part
part to which access can easily be gained by the user when the seating is in its intended configuration of
use and for which the probability of unintentional user contact is high
3.2
part accessible during setting up and folding
part to which access can only be gained when setting up and folding the furniture
oSIST prEN 16139:2022
prEN 16139:2022 (E)
3.3
castors
castors assembly comprising a housing, one or more wheels, an axle and, if required, accessories
3.4
leg rest
extension of the seat area intended to support the legs of the sitter
Note 1 to entry: A leg rest may or may not be permanently attached to the seat.
3.5
foot rest
component intended as an occasional support for the feet or to assist getting on and off a tall chair or tall
stool
Note 1 to entry: A foot rest may be a part of the structure of the underframe of a chair or stool.
3.6
visitor chair
seating for one person used in the office environment additional to the office work chair
Note 1 to entry: It is used for meetings or consultations as well as for reading, writing, listening and waiting.
3.7
single column seating
item of seating whose upper part, which includes the seat, is mounted on a single support with a diameter
of up to 120 mm at its narrowest point
Note 1 to entry: This includes e.g. chairs with gas lifts.
[SOURCE: prEN 12520:2021, definition 3.4]
3.8
tall chair/stool seating
chair / stool with the height of seat from the floor high than the seat height specified in Table C.1 and with
a foot rest
3.9
median plane
vertical plane passing through the geometric centre of the seat, dividing the seat from side to side into
two equal parts
Note 1 to entry: See Figure 1.
oSIST prEN 16139:2022
prEN 16139:2022 (E)
Key
1 median plane
Figure 1 — Median plane
4 Safety, strength and durabilit
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.