iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 16121:2023/AC:2025

(Corrigendum)

Non-domestic storage furniture - Requirements for safety, strength, durability and stability

Non-domestic storage furniture - Requirements for safety, strength, durability and stability

Behältnismöbel für den Nicht-Wohnbereich - Anforderungen an die Sicherheit, Festigkeit, Dauerhaltbarkeit und Standsicherheit

Meubles de rangement à usage collectif - Exigences pour la sécurité, la résistance, la durabilité et la stabilité

Shranjevalno pohištvo za javno uporabo - Zahteve za varnost, trdnost, trajnost in stabilnost - Popravek AC

General Information

Status
Published
Publication Date
22-Apr-2025
ICS
97.140 - Furniture
Technical Committee
CEN/TC 207 - Furniture
Drafting Committee
CEN/TC 207/WG 5 - Contract and educational furniture
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
23-Apr-2025
Completion Date
23-Apr-2025
Ref Project
SIST EN 16121:2024/AC:2025 - Non-domestic storage furniture - Requirements for safety, strength, durability and stability

Relations

Corrects
EN 16121:2023 - Non-domestic storage furniture - Requirements for safety, strength, durability and stability
Effective Date
26-Feb-2025

Buy Standard

EN 16121:2024/AC:2025 - BARVEEN 16121:2024/AC:2025 - BARVE
PreviousNext
Corrigendum
EN 16121:2024/AC:2025 - BARVE
English language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-junij-2025
Shranjevalno pohištvo za javno uporabo - Zahteve za varnost, trdnost, trajnost in
stabilnost - Popravek AC
Non-domestic storage furniture - Requirements for safety, strength, durability and
stability
Behältnismöbel für den Nicht-Wohnbereich - Anforderungen an die Sicherheit, Festigkeit,
Dauerhaltbarkeit und Standsicherheit
Meubles de rangement à usage collectif - Exigences pour la sécurité, la résistance, la
durabilité et la stabilité
Ta slovenski standard je istoveten z: EN 16121:2023/AC:2025
ICS:
97.140 Pohištvo Furniture
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 16121:2023/AC

NORME EUROPÉENNE
April 2025
EUROPÄISCHE NORM
ICS 97.140
English version
Non-domestic storage furniture - Requirements for safety, strength, durability
and stability
Meubles de rangement à usage collectif - Behältnismöbel für den Nicht-Wohnbereich -
Exigences pour la sécurité, la ré
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 12520:2024(Main)
Furniture - Safety, strength and durability - Requirements for domestic seating
SIST EN 12520:2025

This document specifies the minimum requirements for the safety, strength and durability of all types of domestic seating for adults. It also specifies additional test methods for seat side-to-side durability as well as finger entrapment and shear and compression.
It does not apply to ranked seating, seating for non-domestic use, office work chairs, chairs for educational institutions, outdoor seating and to links for linked seating for which European Standards exist.
It does not include requirements for the durability of upholstery materials, castors, reclining and tilting mechanisms and seat height adjustment mechanisms.
It does not include requirements for electrical safety.
It does not include requirements for the resistance to ageing, degradation, flammability and ergonomics.
The requirements are based on use by persons weighing up to 110 kg.
Annex A (normative) specifies the seat side-to-side durability test in D-G points.
Annex B (informative) gives rationales for some of the tests referred to in Table 1.
Annex C (normative) specifies the test methods for finger entrapment and shear and compression.
Annex D (normative) specifies the seat loading point for seating with suspended flexible material.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15338:2024(Main)
Hardware for furniture - Strength and durability of extension elements and their components
SIST EN 15338:2024

This document specifies test methods and requirements for the strength and durability of all types of extension elements and their components for all fields of application, except table extensions.
The tests consist of the application of loads, forces and velocities simulating normal functional use, as well as misuse, that can reasonably be expected to occur.
With the exception of the corrosion test in 6.4, the tests are designed to evaluate properties without regard to materials, design/construction or manufacturing processes.
The strength and durability tests only relate to the extension elements and the parts used for the attachment, e.g. screws.
The strength and durability tests are carried out in a test frame with specified properties. The test results are only used as a guide to the performance of a piece of furniture.
The test results are only valid for the extension element tested.
Ageing and influences of heat and humidity are not included.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15187:2024(Main)
Furniture - Assessment of the effect of light exposure
SIST EN 15187:2024

This document specifies a method for the assessment of the effects of light in indoor conditions, by exposure to artificial radiation and applies to rigid surfaces of all finished products regardless of material.
It does not apply to finishes on leather and fabrics.
The test is intended to be carried out on a part of the finished furniture, but can be carried out on test panels of the same material, finished in an identical manner to the finished product, and of a size sufficient to meet the requirements of the test.
This document describes the most important parameters, such as the colour change when a surface is exposed and specifies the conditions to be used in the exposure apparatus.
The light resistance of a surface can be assessed by using two apparatus as specified in Clause 4, one as a reference test method, and the other for in-company testing.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15186:2024(Main)
Furniture - Assessment of the surface resistance to scratching
SIST EN 15186:2024

This document specifies a method for the assessment of the surface resistance to different kinds of visible scratches. It relates to the rigid surfaces of all finished products, regardless of their material.
It does not apply to finishes on leather and fabrics.
Method A is suitable for all types of surface coatings and coverings except for melamine faced boards (according to EN 14322) and HPL (according to EN 438 1). It simulates measurable penetrating and/or deforming scratches.
Method B is suitable for all types of surfaces. It simulates first visible traces (e.g. scratches, marks) that can also be a change in the gloss.
The test is intended to be carried out on a part of finished furniture. It can, however, be carried out on test panels of the same material, finished in an identical manner to the finished product, and of a size sufficient to meet the requirements of the test.
It is essential that the test be carried out on unused surfaces.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 747-2:2024(Main)
Furniture - Bunk beds and high beds - Part 2: Test methods
SIST EN 747-2:2024

This document specifies test methods for the safety, strength and durability of bunk beds and high beds for domestic and non-domestic use.
The tests are applicable to beds with an internal length greater than 1 400 mm and a maximum bed base width of 1 200 mm and with the upper surface of a bed base 600 mm or more above the floor.
The tests are designed to be applied to a bed that is fully assembled and ready for use.
The applicable safety requirements are given in FprEN 747-1:2023.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 747-1:2024(Main)
Furniture - Bunk beds and high beds - Part 1: Safety, strength and durability requirements
SIST EN 747-1:2024

This document specifies requirements for the safety, strength and durability of bunk beds and high beds for domestic and non-domestic use.
It is applicable to bunk beds and high beds with an internal length greater than 1 400 mm and a maximum bed base width of 1 200 mm, and with the upper surface of a bed base of 600 mm or more above the floor.
This document does not apply to bunk beds and high beds used for special purposes, including but not limited to prisons, the military and fire brigades.
If other products are included in a bunk bed/high bed, for example a table or storage furniture, the relevant European Standards could, in addition, apply.
The document contains one annex:
-   Annex A (informative) - Rationales.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17850:2023(Main)
Hardware for furniture - Star bases for seating - Requirements and test methods
SIST EN 17850:2024

This document specifies requirements and test methods for the determination of the strength, durability and stiffness of star bases for use for seating with three or more legs.
It is not applicable for star bases intended to be used in child seating products.
It is applicable without regard to materials, design/construction or manufacturing processes.
It is a component standard helping to regulate star-base properties between component manufacturer and manufacturer of final seating. This document is not relevant for the final consumer where standards for complete articles exist.
The requirements are based upon star bases fitted with glides and with castors whose wheels are up to 65 mm diameter and for use by persons weighing up to 150 kg.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16121:2023(Main)
Non-domestic storage furniture - Requirements for safety, strength, durability and stability
SIST EN 16121:2024

This document specifies requirements for the safety, strength, and durability for all types of non-domestic storage furniture.
It does not apply to domestic storage, industrial storage, kitchen, catering equipment, retail storage, and industrial storage lockers.
Requirements for strength and durability do not apply to the structure of the building for example the strength of wall hanging cabinets includes only the cabinets and the parts used for attachment. The wall and the wall attachments are not included.
The standard contains five annexes
Annex A (normative) Test methods for finger entrapment;
Annex B (normative) Requirements for schools, kindergartens and similar applications
Annex C (normative) Selecting product from a range of furniture
Annex D (informative) Guidance of test severity in relation to application
Annex E (informative) Suggested loads for tests not specified in this standard
It does not include requirements for the resistance to ageing, degradation and flammability.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15372:2023(Main)
Furniture - Strength, durability and safety - Requirements for non-domestic tables
SIST EN 15372:2024

This document specifies requirements for the safety, strength and durability of all types of non-domestic tables including those with glass in their construction.
It does not apply to office work tables or desks, tables for educational institutions, laboratory workbenches for educational institutions and outdoor tables for which EN standards exist.
It does not apply to laboratory workbenches for professional use and industrial workbenches.
It does not apply to tables where the table top is not fixed to the understructure, i.e. when applying test 6, Table 2, the top becomes detached from the understructure.
With exception of the stability tests, this document does not provide assessment of the suitability of any storage features included in non-domestic tables.
It does not include requirements for electrical safety.
It does not include requirements for the resistance to ageing, degradation.
This document has three annexes:
-   Annex A (normative) Test methods for finger entrapment;
-   Annex B (informative) Additional test requirements;
-   Annex C (informative) Test severity in relation to application.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15185:2023(Main)
Furniture - Assessment of the surface resistance to abrasion
SIST EN 15185:2024

This document specifies a method for the assessment of the abrasion resistance of surfaces with foils, laminates, melamine faced boards, pigmented and transparent lacquers.
It does not apply to leather and textile surfaces.
It does not apply to the surfaces covered by EN 14434.
The test is intended to be carried out on an unused part of the finished furniture, but can be carried out on test panels of the same material, finished in an identical manner to the finished product, and of a size sufficient to meet the requirements of the test.
The test is intended to be carried out on unused surfaces.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day