EN ISO 7491:2000
(Main)Dental materials - Determination of colour stability (ISO 7491:2000)
Dental materials - Determination of colour stability (ISO 7491:2000)
Zahnärztliche Werkstoffe - Bestimmung der Farbbeständigkeit (ISO 7491:2000)
Diese Internationale Norm legt ein Verfahren zur Bestimmung der Farbbeständigkeit von zahnärztlichen Werkstoffen fest, nachdem diese Licht und Wasser ausgesetzt waren.
Produits dentaires - Détermination de la stabilité de couleur (ISO 7491:2000)
La présente Norme internationale spécifie une méthode pour la détermination de la stabilité de couleur des produits dentaires après exposition à la lumière et à l'eau.
Dental materials - Determination of colour stability (ISO 7491:2000)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 7491:2001
01-november-2001
1DGRPHãþD
SIST EN 27491:2000
Dental materials - Determination of colour stability (ISO 7491:2000)
Dental materials - Determination of colour stability (ISO 7491:2000)
Zahnärztliche Werkstoffe - Bestimmung der Farbbeständigkeit (ISO 7491:2000)
Produits dentaires - Détermination de la stabilité de couleur (ISO 7491:2000)
Ta slovenski standard je istoveten z: EN ISO 7491:2000
ICS:
11.060.10 =RERWHKQLþQLPDWHULDOL Dental materials
SIST EN ISO 7491:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 7491:2001
---------------------- Page: 2 ----------------------
SIST EN ISO 7491:2001
---------------------- Page: 3 ----------------------
SIST EN ISO 7491:2001
---------------------- Page: 4 ----------------------
SIST EN ISO 7491:2001
---------------------- Page: 5 ----------------------
SIST EN ISO 7491:2001
---------------------- Page: 6 ----------------------
SIST EN ISO 7491:2001
INTERNATIONAL ISO
STANDARD 7491
Second edition
2000-09-01
Dental materials — Determination of colour
stability
Produits dentaires — Détermination de la stabilité de couleur
Reference number
ISO 7491:2000(E)
©
ISO 2000
---------------------- Page: 7 ----------------------
SIST EN ISO 7491:2001
ISO 7491:2000(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2000
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 � CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.ch
Web www.iso.ch
Printed in Switzerland
ii © ISO 2000 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 7491:2001
ISO 7491:2000(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
International Standard ISO 7491 was prepared by Technical Committee ISO/TC 106, Dentistry, Subcommittee
SC 2, Prosthodontic materials.
This second edition cancels and replaces the first edition (ISO 7491:1985), which has been technically revised.
© ISO 2000 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 7491:2001
ISO 7491:2000(E)
Introduction
Colour stability is an important characteristic of dental materials and it is expected that the test methods in this
International Standard will be referred to in the International Standards specifying such materials.
iv © ISO 2000 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 7491:2001
INTERNATIONAL STANDARD ISO 7491:2000(E)
Dental materials — Determination of colour stability
1 Scope
This International Sta
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.