EN ISO 2812-3:2012

Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an absorbent medium (ISO 2812-3:2012)

2011-12-09 EMA: Draft for // vote received in ISO/CS (see notification of 2011-12-09 in dataservice).
DOR should have been 2012-07-20.

Beschichtungsstoffe - Bestimmung der Beständigkeit gegen Flüssigkeiten - Teil 3: Verfahren mit einem saugfähigem Material (ISO 2812-3:2012)

Dieser Teil von ISO 2812 legt ein Verfahren zum Bestimmen der Beständigkeit einer einzelnen Schicht oder eines Mehrschichtsystems aus Beschichtungsstoffen gegen die Einwirkung von Flüssigkeiten oder pasten-förmigen Produkten mittels eines saugfähigen Materials fest.
Dieses Verfahren ermöglicht dem Prüfer, die Wirkung der Prüfsubstanz auf die Beschichtung und, falls notwendig, die Schädigung des Substrates zu beurteilen.

Peintures et vernis - Détermination de la résistance aux liquides - Partie 3: Méthode utilisant un milieu absorbant (ISO 2812-3:2012)

Barve in laki - Ugotavljanje odpornosti proti tekočinam - 3. del: Metoda z uporabo vpojnega materiala (ISO 2812-3:2012)

Ta del standarda ISO 2812 določa metodo z uporabo vpojnega materiala za ugotavljanje odpornosti posamezne plasti ali večplastnih sistemov premazov proti učinkom tekočin ali izdelkov, podobnih pasti. Ta metoda preskuševalcu omogoča določiti učinke preskušane snovi na premaz in po potrebi oceniti škodo na podlagi.

General Information

• Status: Withdrawn
• Publication Date: 30-Jun-2012
• Withdrawal Date: 07-May-2019
• ICS: 87.040 - Paints and varnishes
• Technical Committee: CEN/TC 139 - Paints and varnishes
• Drafting Committee: CEN/TC 139 - Paints and varnishes
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 08-May-2019
• Ref Project: SIST EN ISO 2812-3:2012 - Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an absorbent medium (ISO 2812-3:2012)

Relations

• Replaces: EN ISO 2812-3:2007 - Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an absorbent medium (ISO 2812-3:2007)
• Effective Date: 08-Jun-2022
• Replaced By: EN ISO 2812-3:2019 - Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an absorbent medium (ISO 2812-3:2019)
• Effective Date: 15-May-2019

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 2812-3:2012
01-september-2012
1DGRPHãþD
SIST EN ISO 2812-3:2007
%DUYHLQODNL8JRWDYOMDQMHRGSRUQRVWLSURWLWHNRþLQDPGHO0HWRGD]XSRUDER
YSRMQHJDPDWHULDOD,62
Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an
absorbent medium (ISO 2812-3:2012)
Beschichtungsstoffe - Bestimmung der Beständigkeit gegen Flüssigkeiten - Teil 3:
Verfahren mit saugfähigem Material (ISO 2812-3:2012)
Peintures et vernis - Détermination de la résistance aux liquides - Partie 3: Méthode
utilisant un milieu absorbant (ISO 2812-3:2012)
Ta slovenski standard je istoveten z: EN ISO 2812-3:2012
ICS:
87.040 Barve in laki Paints and varnishes
SIST EN ISO 2812-3:2012 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 2812-3:2012

---------------------- Page: 2 ----------------------

SIST EN ISO 2812-3:2012


EUROPEAN STANDARD
EN ISO 2812-3

NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2012
ICS 87.040 Supersedes EN ISO 2812-3:2007
English Version
Paints and varnishes - Determination of resistance to liquids -
Part 3: Method using an absorbent medium (ISO 2812-3:2012)
Peintures et vernis - Détermination de la résistance aux Beschichtungsstoffe - Bestimmung der Beständigkeit
liquides - Partie 3: Méthode utilisant un milieu absorbant gegen Flüssigkeiten - Teil 3: Verfahren mit einem
(ISO 2812-3:2012) saugfähigem Material (ISO 2812-3:2012)
This European Standard was approved by CEN on 20 June 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 2812-3:2012: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 2812-3:2012
EN ISO 2812-3:2012 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 2812-3:2012
EN ISO 2812-3:2012 (E)
Foreword
This document (EN ISO 2812-3:2012) has been prepared by Technical Committee ISO/TC 35 “Paints and
varnishes” in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2013, and conflicting national standards shall be withdrawn at
the latest by January 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 2812-3:2007.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 2812-3:2012 has been approved by CEN as a EN ISO 2812-3:2012 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 2812-3:2012

---------------------- Page: 6 ----------------------

SIST EN ISO 2812-3:
...