CEN ISO/TS 14907-2:2016
(Main)Electronic fee collection - Test procedures for user and fixed equipment - Part 2: Conformance test for the on-board unit application interface (ISO/TS 14907-2:2016)
Electronic fee collection - Test procedures for user and fixed equipment - Part 2: Conformance test for the on-board unit application interface (ISO/TS 14907-2:2016)
ISO/TS 14907-2:2016 describes tests that verify on-board unit (OBU) conformance of implementations of functions and data structures, as defined in the implementation conformance statement based on ISO 14906:2011/Amd1:2015, for electronic fee collection (EFC) applications. After the tests of isolated data items and functions (C.2 to C.4), an example is given for testing of a complete EFC transaction (C.3).
It comprises definitions of OBU conformance assessment tests of
- basic dedicated short-range communication (DSRC) L7 functionality,
- EFC application functions,
- EFC attributes (i.e. EFC application information),
- the addressing procedures of EFC attributes and (hardware) components [e.g. integrated circuit cards (ICC) and man-machine interfaces (MMI)],
- the EFC transaction model, which defines the common elements and steps of any EFC transaction, and
- the behaviour of the interface so as to support interoperability on an EFC-DSRC application interface level.
The purpose of this part of ISO/TS 14907 is to define tests that
- assess OBU capabilities,
- assess OBU behaviour,
- serve as a guide for OBU conformance evaluation and type approval,
- achieve comparability between the results of the corresponding tests applied in different places at different times, and
- facilitate communications between parties.
Whereas, ISO/TS 14907-2:2016 defines examples of test cases for DSRC and EFC functionality in Annex C, it does not intend to specify a complete test suite for a certain implementation. To compose a test suite for a specific EFC implementation, the test cases may have to be modified and new test cases may have to be defined and added in order for the conformance test to be complete. It can be useful to take into account the following considerations when defining a complete test suite:
- small range: "exhaustive testing" of critical interoperability/compatibility features,
- large range: testing of boundaries and random values, and
- composite types: testing of individual items in sequence or parallel.
It is outside the scope of ISO/TS 14907-2:2016 to define tests that assess
- performance,
- robustness, and
- reliability of an implementation.
Annex D provides an informative overview of Japanese OBE conformance tests that are based on the ISO/TS 14907 series, in order to illustrate how these can be applied in practice.
Elektronische Gebührenerhebung - Testverfahren für straßenseitige und fahrzeugseitige Einrichtungen - Teil 2: Konformitätsprüfungen für die Anwendungsschnittstelle der fahrzeugseitigen Einrichtung (ISO/TS 14907-2:2016)
Perception du télépéage - Modes opératoires relatifs aux équipements embarqués et aux équipements fixes - Partie 2: Essai de conformité de l'interface d'application de l'unité embarquée (ISO/TS 14907-2:2016)
Elektronsko pobiranje pristojbin - Postopki za preskušanje opreme - 2. del: Preskus skladnosti za aplikacijski vmesnik vgrajene enote za elektronsko cestninjenje (ISO/TS 14907-2:2016)
Ta del standarda ISO/TS 14907 opisuje preskuse za preverjanje skladnosti opreme v vozilih (OBU) za uvajanje funkcij in podatkovnih struktur, kot je opredeljeno v izjavi o skladnosti izvedbe,
ki temelji na določbah standarda ISO 14906:2011/dopolnilo 1:2015 za elektronsko pobiranje pristojbin (EFC). Po preskusih posameznih podatkovnih elementov in funkcij (od C.2 do C.4) se poda primer za preskušanje celotne transakcije sistema za elektronsko pobiranje pristojbin (C.3).
Področje uporabe tega dela standarda ISO/TS 14907 zajema opredelitve preskusov za ocenjevanje skladnosti opreme v vozilih za:
– osnovne sisteme namenske komunikacije kratkega dosega (DSRC);
– funkcije sistema elektronskega pobiranja pristojbin;
– atribute elektronskega pobiranja pristojbin (tj. informacije sistema elektronskega pobiranja cestnin);
– obravnavane postopke atributov sistema elektronskega pobiranja cestnin in sestavnih delov (strojne opreme) (npr. kartice z integriranim
vezjem (ICC) in vmesniki človek-stroj (MMI));
– model transakcije elektronskega pobiranja pristojbin, ki določa skupne elemente in korake katere koli transakcije elektronskega pobiranja pristojbin; ter
– delovanje vmesnika za podporo interoperabilnosti na ravni aplikacijskega vmesnika za EFC-DSRC (glej sliko 1).
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2017
1DGRPHãþD
SIST-TS CEN ISO/TS 14907-2:2011
Elektronsko pobiranje pristojbin - Postopki za preskušanje opreme - 2. del:
Preskus skladnosti za aplikacijski vmesnik vgrajene enote za elektronsko
cestninjenje (ISO/TS 14907-2:2016)
Electronic fee collection - Test procedures for user and fixed equipment - Part 2:
Conformance test for the on-board unit application interface (ISO/TS 14907-2:2016)
Elektronische Gebührenerhebung - Testverfahren für straßenseitige und fahrzeugseitige
Einrichtungen - Teil 2: Konformitätsprüfungen für die Anwendungsschnittstelle der
fahrzeugseitigen Einrichtung (ISO/TS 14907-2:2016)
Perception du télépéage - Modes opératoires relatifs aux équipements embarqués et aux
équipements fixes - Partie 2: Essai de conformité de l'interface d'application de l'unité
embarquée (ISO/TS 14907-2:2016)
Ta slovenski standard je istoveten z: CEN ISO/TS 14907-2:2016
ICS:
35.240.60 Uporabniške rešitve IT v IT applications in transport
prometu
43.040.15 $YWRPRELOVNDLQIRUPDWLND Car informatics. On board
9JUDMHQLUDþXQDOQLãNLVLVWHPL computer systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
CEN ISO/TS 14907-2
TECHNICAL SPECIFICATION
SPÉCIFICATION TECHNIQUE
August 2016
TECHNISCHE SPEZIFIKATION
ICS 43.040.15; 35.240.60 Supersedes CEN ISO/TS 14907-2:2011
English Version
Electronic fee collection - Test procedures for user and
fixed equipment - Part 2: Conformance test for the on-
board unit application interface (ISO/TS 14907-2:2016)
Perception du télépéage - Modes opératoires relatifs Elektronische Gebührenerhebung - Testverfahren für
aux équipements embarqués et aux équipements fixes - straßenseitige und fahrzeugseitige Einrichtungen - Teil
Partie 2: Essai de conformité de l'interface 2: Konformitätsprüfungen für die
d'application de l'unité embarquée (ISO/TS 14907- Anwendungsschnittstelle der fahrzeugseitigen
2:2016) Einrichtung (ISO/TS 14907-2:2016)
This Technical Specification (CEN/TS) was approved by CEN on 26 June 2016 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TS 14907-2:2016 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (CEN ISO/TS 14907-2:2016) has been prepared by Technical Committee ISO/TC 204
“Intelligent transport systems” in collaboration with Technical Committee CEN/TC 278 “Intelligent
transport systems” the secretariat of which is held by NEN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes CEN ISO/TS 14907-2:2011.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO/TS 14907-2:2016 has been approved by CEN as CEN ISO/TS 14907-2:2016 without any
modification.
TECHNICAL ISO/TS
SPECIFICATION 14907-2
Third edition
2016-07-15
Electronic fee collection — Test
procedures for user and fixed
equipment —
Part 2:
Conformance test for the on-board
unit application interface
Perception du télépéage — Modes opératoires relatifs aux
équipements embarqués et aux équipements fixes —
Partie 2: Essai de conformité de l’interface d’application de l’unité
embarquée
Reference number
ISO/TS 14907-2:2016(E)
©
ISO 2016
ISO/TS 14907-2:2016(E)
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – All rights reserved
ISO/TS 14907-2:2016(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 4
3 Terms and definitions . 5
4 Abbreviated terms . 6
5 OBU and supporting information . 8
5.1 ICS . 8
5.2 IXIT . 8
6 Testing requirements . 9
6.1 Conceptual test architecture . 9
6.2 Conformance test system .10
6.2.1 Functionality of tester .10
6.2.2 Conformance testing . .11
6.3 Test documentation .11
6.3.1 Tester .11
6.3.2 Test methods and test cases .11
6.3.3 Test results .11
Annex A (normative) Implementation conformance statement proforma .12
Annex B (normative) Implementation of extra information for testing (IXIT) proforma .25
Annex C (informative) OBU test cases .29
Annex D (informative) OBE conformance test procedures conducted in Japan .70
Bibliography .75
ISO/TS 14907-2:2016(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical
Barriers to Trade (TBT), see the following URL: Foreword — Supplementary information.
The committee responsible for this document is ISO/TC 204, Intelligent transport systems.
This third edition cancels and replaces the second edition (ISO/TS 14907-2:2011), which has been
technically revised with the following changes:
— updated references to clauses and annexes in accordance with ISO 14906:2011/Amd1:2015;
— updated Annex D to reflect current situation in Japan.
ISO/TS 14907 consists of the following parts, under the general title Electronic fee collection — Test
procedures for user and fixed equipment:
— Part 1: Description of test procedures
— Part 2: Conformance test for the on-board unit application interface
iv © ISO 2016 – All rights reserved
ISO/TS 14907-2:2016(E)
Introduction
This part of ISO/TS 14907 describes tests that verify on-board unit (OBU) conformance of
implementations of functions and data structures for electronic fee collection (EFC) applications.
TECHNICAL SPECIFICATION ISO/TS 14907-2:2016(E)
Electronic fee collection — Test procedures for user and
fixed equipment —
Part 2:
Conformance test for the on-board unit application
interface
1 Scope
This part of ISO/TS 14907 describes tests that verify on-board unit (OBU) conformance of
implementations of functions and data structures, as defined in the implementation conformance
statement based on I
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.