EN 3706:2012

Aerospace series - Headless threaded plugs, cross recess, in aluminium alloy 5086

This standard specifies characteristics of headless threaded plugs, cross recess, in aluminium alloy 5086, for
aerospace purpose.

Luft- und Raumfahrt - Verschlussschraube ohne Kopf mit Kreuzschlitz, aus Aluminiumlegierung 5086

Diese Norm legt die Merkmale von Verschlussschrauben ohne Kopf mit Kreuzschlitz, aus Aluminiumlegierung 5086, für die Luft- und Raumfahrt fest.

Série aérospatiale - Bouchons filetés, sans tête, empreinte cruciforme, en alliage d'aluminium 5086

Aeronavtika - Brezglava navojna zapirala s križno zarezo iz aluminijeve zlitine 5086

Ta evropski standard določa lastnosti brezglavih navojnih zapiral s križno zarezo iz aluminijeve zlitine 5086 za uporabo v aeronavtiki.

General Information

• Status: Published
• Publication Date: 13-Mar-2012
• Withdrawal Date: 29-Sep-2012
• ICS: 49.030.20 - Bolts, screws, studs
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 3 - Mechanical
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 30-Jun-2017
• Ref Project: SIST EN 3706:2012 - Aerospace series - Headless threaded plugs, cross recess, in aluminium alloy 5086

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aeronavtika - Brezglava navojna zapirala s križno zarezo iz aluminijeve zlitine 5086Luft- und Raumfahrt - Verschlussschraube ohne Kopf mit Kreuzschlitz, aus Aluminiumlegierung 5086Série aérospatiale - Bouchons filetés, sans tête, empreinte cruciforme, en alliage d’aluminium 5086Aerospace series - Headless threaded plugs, cross recess, in aluminium alloy 508649.030.20Sorniki, vijaki, stebelni vijakiBolts, screws, studs49.025.20AluminijAluminiumICS:Ta slovenski standard je istoveten z:EN 3706:2012SIST EN 3706:2012en,de01-maj-2012SIST EN 3706:2012SLOVENSKI
STANDARD



SIST EN 3706:2012



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3706
March 2012 ICS 49.030.20 English Version
Aerospace series - Headless threaded plugs, cross recess, in aluminium alloy 5086
Série aérospatiale - Bouchons filetés, sans tête, empreinte cruciforme, en alliage d'aluminium 5086
Luft- und Raumfahrt - Verschlussschraube ohne Kopf mit Kreuzschlitz, aus Aluminiumlegierung 5086 This European Standard was approved by CEN on 24 September 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3706:2012: ESIST EN 3706:2012



EN 3706:2012 (E) 2 Contents Page Foreword . 31 Scope . 42 Normative references . 43 Required characteristics . 43.1 Configuration — Dimensions — Tolerances . 43.2 Material . 44 Designation . 65 Marking. 66 Installation holes . 6 SIST EN 3706:2012



EN 3706:2012 (E) 3 Foreword This document (EN 3706:2012) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2012, and conflicting national standards shall be withdrawn at the latest by September 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, C
...