EN 2647:2006

Aerospace series - Nuts, hexagonal, self-locking, ball seat, in alloy steel, cadmium plated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature)/235 °C

This standard specifies the characteristics of self-locking hexagonal nuts with ball seat in alloy steel, cadmium plated, MoS2 lubricated.
Classification: 900 MPa ) / 235 °C )
They are intended to be used with washers to EN 2648 or suitable parts, see Annex A.

Luft- und Raumfahrt - Sechskantmuttern, selbstsichernd, für Neigungsausgleich, aus legiertem Stahl, verkadmet, MoS2-geschmiert - Klasse: 900 MPa (bei Raumtemperatur)/235 °C

Diese Norm legt die Eigenschaften von selbstsichernden Sechskantmuttern für Neigungsausgleich, aus legiertem Stahl, verkadmet, MoS2 geschmiert, fest.
Klasse: 900 MPa ) / 235 °C )
Sie werden in Verbindung mit Scheiben nach EN 2648 oder mit geeigneten Teilen verwendet, siehe Anhang A.

Série aérospatiale - Écrous hexagonaux, à freinage interne, orientables, en acier allié, cadmiés, lubrifiés MoS2 - Classification: 900 MPa (à température ambiante)/235 °C

Aeronavtika - Matice, šestrobe, samozapiralne, z izravnavo nagiba, iz legiranega jekla, prevlečene s kadmijem, namazane z MoS2 - Klasifikacija: 900 MPa (pri temperaturi okolice)/235 °C

General Information

• Status: Published
• Publication Date: 20-Jun-2006
• Withdrawal Date: 30-Dec-2006
• ICS: 49.030.30 - Nuts
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 3 - Mechanical
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 31-May-2017
• Ref Project: SIST EN 2647:2009 - Aerospace series - Nuts, hexagonal, self-locking, ball seat, in alloy steel, cadmium plated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature)/235 °C

Relations

• Replaces: EN 2647:1995 - Aerospace series - Nuts, hexagonal, self-locking, ball seat, in alloy steel, cadmium plated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature) / 235 °C
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Sechskantmuttern, selbstsichernd, für Neigungsausgleich, aus legiertem Stahl, verkadmet, MoS2-geschmiert - Klasse: 900 MPa (bei Raumtemperatur)/235 °CSérie aérospatiale - Écrous hexagonaux, à freinage interne, orientables, en acier allié, cadmiés, lubrifiés MoS2 - Classification: 900 MPa (à température ambiante)/235 °CAerospace series - Nuts, hexagonal, self-locking, ball seat, in alloy steel, cadmium plated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature)/235 °C49.030.30MaticeNutsICS:Ta slovenski standard je istoveten z:EN 2647:2006SIST EN 2647:2009en,de01-april-2009SIST EN 2647:2009SLOVENSKI
STANDARDSIST EN 2647:20011DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2647
June 2006 ICS 49.030.30 Supersedes EN 2647:1995 English Version
Aerospace series - Nuts, hexagonal, self-locking, ball seat, in alloy steel, cadmium plated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature)/235 °C
Série aérospatiale - Écrous hexagonaux, à freinage interne, orientables, en acier allié, cadmiés, lubrifiés MoS2 - Classification: 900 MPa (à température ambiante)/235 °C
Luft- und Raumfahrt - Sechskantmuttern, selbstsichernd, für Neigungsausgleich, aus legiertem Stahl, verkadmet, MoS2-geschmiert - Klasse: 900 MPa (bei Raumtemperatur)/235 °C This European Standard was approved by CEN on 3 February 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2006 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2647:2006: ESIST EN 2647:2009

Assembly.8
...