EN 4008-007:2011
(Main)Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 007: Positioner for crimping tool M22520/2-01 - Product standard
Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 007: Positioner for crimping tool M22520/2-01 - Product standard
This European Standard specifies the characteristics for the positioner used with the M22520/2-01 crimping tool to crimp electrical contacts according to EN 4008 002.
Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Crimpwerkzeug und zugehöriges Zubehör - Teil 007: Positionierer für Crimpzange M22520/2-01 - Produktnorm
Diese Norm legt die Eigenschaften des Positionierstückes fest, das zusammen mit der Crimpzange
M22520/2-01 zum Crimpen von elektrischen Kontakten nach EN 4008-002 verwendet wird.
Série aérospatiale - Organes de connexion électrique et optique - Outils de sertissage et accessoires associés - Partie 007 : Positionneur pour pince à sertir M22520/2-01 - Norme de produit
La présente norme spécifie les caractéristiques du positionneur utilisé avec l'outil de sertissage M22520/2-01
pour sertir les contacts électriques en accord avec l'EN 4008-002.
Aeronavtika - Elementi električnih in optičnih povezav - Orodje za stiskanje in pripadajoča oprema - 007. del: Pozicionirna naprava za klešče M22520/2-01 - Standard za izdelek
Ta standard določa lastnosti pozicionirne naprave, ki se uporablja s kleščami M22520/2-01 za stiskanje električnih kontaktov v skladu z EN 4008-002.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Crimpwerkzeug und zugehöriges Zubehör - Teil 007: Positionierer für Crimpzange M22520/2-01 - ProduktnormSérie aérospatiale - Organes de connexion électrique et optique - Outils de sertissage et accessoires associés - Partie 007 : Positionneur pour pince à sertir M22520/2-01 - Norme de produitAerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 007: Positioner for crimping tool M22520/2-01 - Product standard49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 4008-007:2011SIST EN 4008-007:2011en,fr,de01-oktober-2011SIST EN 4008-007:2011SLOVENSKI
STANDARDSIST EN 4008-007:20091DGRPHãþD
SIST EN 4008-007:2011
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4008-007
July 2011 ICS 49.060 Supersedes EN 4008-007:2006English Version
Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 007: Positioner for crimping tool M22520/2-01 - Product standard
Série aérospatiale - Organes de connexion électrique et optique - Outils de sertissage et accessoires associés - Partie 007 : Positionneur pour pince à sertir M22520/2-01 -Norme de produit
Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Crimpwerkzeug und zugehöriges Zubehör - Teil 007: Positionierer für Crimpzange M22520/2-01 - Produktnorm This European Standard was approved by CEN on 4 May 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4008-007:2011: ESIST EN 4008-007:2011
EN 4008-007:2011 (E) 2 Contents Page Foreword .3 1 Scope .4 2 Normative references .4 3 Terms and definitions .4 4 Required characteristics .4 5 Designation .6 6 Marking .6 7 Technical specification .6 SIST EN 4008-007:2011
EN 4008-007:2011 (E) 3 Foreword This document (EN 4008-007:2011) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2012, and conflicting national standards shall be withdrawn at the latest by January 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 4008-007:2006. After enquiries and votes carried out in accordance w
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.