CEN ISO/TS 14027:2018

Environmental labels and declarations - Development of product category rules (ISO/TS 14027:2017)

ISO/TS 14027:2017 provides principles, requirements and guidelines for developing, reviewing, registering and updating PCR within a Type III environmental declaration or footprint communication programme based on life cycle assessment (LCA) according to ISO 14040 and ISO 14044 as well as ISO 14025, ISO 14046 and ISO/TS 14067.
It also provides guidance on how to address and integrate additional environmental information, whether or not it is based on LCA in a coherent and scientifically sound manner according to ISO 14025.

Umweltkennzeichnungen und -deklarationen - Entwicklung von Produktkategorieregeln (ISO/TS 14027:2017)

Marquages et déclarations environnementaux - Développement des règles de définition des catégories de produit (ISO/TS 14027:2017)

ISO/TS 14027:2017 fournit les principes, les exigences et les lignes directrices pour le développement, la revue, l'enregistrement et la mise à jour des PCR dans le cadre d'un programme de déclarations environnementales de Type III ou de communication d'empreinte fondé sur l'analyse du cycle de vie (ACV), conformément à l'ISO 14040 et l'ISO 14044 ainsi que l'ISO 14025, l'ISO 14046 et l'ISO/TS 14067.
ISO/TS 14027:2017 fournit également des recommandations relatives à la manière de traiter et d'intégrer les informations environnementales additionnelles, qu'elles soient fondées ou non sur l'ACV, d'une façon cohérente et scientifiquement fiable conformément à l'ISO 14025.

Okoljske označbe in deklaracije - Razvoj pravil za kategorije proizvodov (ISO/TS 14027:2017)

General Information

• Status: Published
• Publication Date: 06-Feb-2018
• ICS: 13.020.50 - Ecolabelling
• Technical Committee: CEN/SS S26 - Environmental Management
• Drafting Committee: CEN/SS S26 - Environmental Management
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 07-Feb-2018
• Completion Date: 07-Feb-2018
• Ref Project: SIST-TS CEN ISO/TS 14027:2021 - Environmental labels and declarations - Development of product category rules (ISO/TS 14027:2017)

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2021
Okoljske označbe in deklaracije - Razvoj pravil za kategorije proizvodov (ISO/TS
14027:2017)
Environmental labels and declarations - Development of product category rules (ISO/TS
14027:2017)
Umweltkennzeichnungen und -deklarationen - Entwicklung von Produktkategorieregeln
(ISO/TS 14027:2017)
Marquages et déclarations environnementaux - Développement des règles de catégorie
de produit (ISO/TS 14027:2017)
Ta slovenski standard je istoveten z: CEN ISO/TS 14027:2018
ICS:
13.020.50 Označevanje z ekološko Ecolabelling
nalepko
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

CEN ISO/TS 14027
TECHNICAL SPECIFICATION
SPÉCIFICATION TECHNIQUE
February 2018
TECHNISCHE SPEZIFIKATION
ICS 13.020.50
English Version
Environmental labels and declarations - Development of
product category rules (ISO/TS 14027:2017)
Marquages et déclarations environnementaux - Umweltkennzeichnungen und -deklarationen -
Développement des règles de définition des catégories Entwicklung von Produktkategorieregeln (ISO/TS
de produit (ISO/TS 14027:2017) 14027:2017)
This Technical Specification (CEN/TS) was approved by CEN on 8 January 2018 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TS 14027:2018 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
The text of ISO/TS 14027:2017 has been prepared by Technical Committee ISO/TC 207 “Environmental
management” of the International Organization for Standardization (ISO) and has been taken over as
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO/TS 14027:2017 has been approved by CEN as CEN ISO/TS 14027:2018 without any
modification.
TECHNICAL ISO/TS
SPECIFICATION 14027
First edition
2017-04
Environmental labels and
declarations — Development of
product category rules
Marquages et déclarations environnementaux — Développement des
règles de catégorie de produit
Reference number
ISO/TS 14027:2017(E)
©
ISO 2017
ISO/TS 14027:2017(E)
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2017 – All rights reserved

ISO/TS 14027:2017(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Symbols and abbreviated terms . 4
5 Principles . 4
5.1 LCA based environmental information . 4
5.2 Involvement of interested parties . 4
5.3 Comparability. 4
6 PCR development . 4
6.1 General . 4
6.2 Consistent information . 5
6.3 Comparability. 5
6.4 PCR preparation . 5
6.4.1 Formation of the PCR committee. 5
6.4.2 Tasks of the PCR committee . 6
6.4.3 Adaptation of existing PCR . 6
6.4.4 Open consultation . 8
6.5 Content of the PCR . 8
6.5.1 Product category . 8
6.5.2 Functional unit or declared unit . 8
6.5.3 Requirements for conducting the underlying LCA or footprint studies . 8
6.5.4 Predetermined parameters . 9
6.5.5 Core rules and PCR . . 9
6.5.6 Conditions to support comparability .10
6.6 Additional environmental information .10
7 PCR review .11
7.1 General .11
7.2 The PCR review panel .11
7.3 Procedures .12
7.4 Tasks of the review panel .12
7.5 PCR review statement .13
8 PCR identification and registration .13
8.1 PCR identification .13
8.1.1 Identification of the PCR document .13
8.2 PCR registration .15
9 Updating, revision and expiration of PCR .15
Annex A (informative) Information modules .16
Annex B (informative) Tasks for the programme operator .18
Bibliography .20
ISO/TS 14027:2017(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent righ
...